Pengaruh Penambahan Kitosan Nano Gel Terhadap Sifat Mekanis dan Stabilitas Warna Bahan Basis Gigi Tiruan Resin Akrilik Polimerisasi Panas
91
DAFTAR PUSTAKA
Agusnar H, Nainggolan I, Sukirman, 2013. Mechanical Properties Of paper
From Oil Palm Pulp Treated With Chitosan From Horseshoe Crab. AENSI Journals
Advances In Eviromental Biology; 7(12): 3857-3.
Amer ZJA, Ahmed JK, Abbas SF, 2014. Chitosan/PMMA Bioblend for Drug
Release Applications. Int J Eng and Tech; 4(5): 1-6
Anusavice KJ, Shen C, Rawls HP, 2013. Phillips’ Science Of Dental Materials.
12th ed. USA : Elsevier Saunders; 89, 91, 261, 722, 724, 727-8, 735, 737, 739, 741-4.
Ariyani. 2012. Pengaruh Penambahan Fiber Glass Reinforced Terhadap
Penyerapan Air dan Stabilitas Warna Bahan Basis Gigitiruan Nilon Termoplastik.
Tesis. Medan: FKG USU.
Assuncao WG, Gomes EA, Barao VA, Barbosa DB, Tabata LF. 2010. Effect of
Storage inn Artificial Saliva and Thermal Cycling on Knoop Hardness of Resin
Denture Teeth. J Prosthodont Res; 54(3): 123-7.
Azeredo HMC, De Britto D, Assis OBG, 2010. Chitosan Edible Films and
Coatings-A Review. Nova Sci Pub Inc; 179-15.
Bashi TK, AL-Nema LM. 2009. Evaluation of some mechanical properties of
reinforce acrylic resin denture base material (an in vitro study). Al-Rafidain dent J;
9(1): 57-65.
Bettencourt AF, et.al. 2010. Biodegradation of Acrylic Based Resins: A review.
Elsvier: Dental Material; e171-e180.
Craig RG, Powers JM, Watana JC, 2000. Dental Material: Properties and
Manipulation. 7th ed. India: Mosby; 257-67.
El-Sheikh AM, Al-Zahrani SB. 2006. Causes of denture fracture: a survey: Saudi
Dent J. 18(3):149-53.
Flores-ramirez N, et all, 2008. Hybrid Natural-Synthetic Chitosan Resin:
Thermal and Mechanical Behavior. J Biomater Sci Polymer; 19(2): 259-14.
Foat F, Panza LHV, Gracia RCMR, Cury AADB, 2009. Impact and Flexural
Strength and Fracture Morphology Of Acrylic Resins With Impact Modifiers. J The
Open Dentistry; 3: 137-6.
Universitas Sumatera Utara
92
Gladwin M, Bagby M. Clinical Aspects Of Dental Materials, Theory, Practice
and Cases. 3rd ed. Philadelphia: Lippincort Williams & Wilkins 2009; 121-156.
Goguta L, Marsavina L, Bratu D, Topala F, 2006. Impact Strength Of Acrylic
Heat Curing Denture Base Resin Reinforced With E-Glass Fibers. TMJ; 56 (1): 1.
Goiato MC, Zulccolotti BCR, Santos DM, Moreno A, Alves-Rezende MCR.
2009. Effects of thermocycling on mechanical properyies of soft lining materials.
Acta Odontol latinoam:22(3): 227-32.
Gu ZY, Xue PH, Li WJ, 2001. Preparation of the Porous Chitosan Membrane by
Cryogenic Induced Phase Separation. Polym Adv Technol; 12: 665-4.
Gujjari AK, Bhatnagar VM, Basavaraju RM. 2013. Color Stability and Strength
of Poly(methyl methacrylate) and Bis-Acrylic Composite Based Provisional Crown
and Bridge Auto-polymerizing Resins Exposed to Beverages and Food Dye: An in
Vitro Study. Indian J Dent Res: 24(2); 172-5.
Hafner B, 2007. Scanning Electron Microscopy Primer. Characterization
Facility, University of Minnesota; 1-29.
Hanafiah IKA, 2003. Rancangan percobaan teori dan aplikasi. Jakarta: PT Raja
Grafindo Persada; 9.
Henny S. 2013. Efek Penambahan Kitosan Molekul Tinggi Nanopartikel Pada
Semen Ionomer Kaca Nanopartikel Terhadap Viabilitas Sel Pulpa (In Vitro). Tesis.
Medan: FKG USU; 7.
Henny S. 2014. Efek Penambahan Kitosan Blangkas (Tachypeleus gigas)
Nanopartikel pada Varian Semen Ionomer Kaca Terhadap Mikrostruktur Dentin dan
Komposisi Kimia Melalui SEM-EDX (in vitro). Tesis. Medan: FKG USU; 23-5.
Herguth WR, Nadeau G, 2004. Applications of Scanning Electron Microscopy
and Energy Dispersive Spectroscopy (SEM/EDS) to Practical Tribology Problems.
Herguth Lab Inc; 1-8.
Hipolito AC, Barao VA, Faverani LP, Ferreira MB, Assuncao WG. 2013. Color
Degradation of Acrylic Resin Denture Teeth as a Function of Liquid Diet:
Ultraviolet-Visible Reflection Analysis. J Biomed Opt: 18(10); 1-9.
Hu Q, Li B, Wang M, Shen J, 2003. Preparation and Characterization Of
Biodegradable Chitosan / Hidroxyapatite Nanocompisite Rods Via In Situ
Hybridization: A Potential Material As Internal Fixation Of Bone Fracture. Elsevier:
Biomaterial; 779-785.
Universitas Sumatera Utara
93
Hutapea PR. 2014. Efek dan Karakterisasi kitosan Molekul Tinggi Nanopartikel
pada Pasta Gigi Terhadap Penutupan Tubulus Dentin (In vitro). Tesis: Medan: FKG
USU; 28-7.
Imirzalioglu P, Karacaer, Yilmaz B, Ozmen I. 2010. Color Stability of Denture
Acrylic Resins and a Soft Lining Material Against Tea, Coffee, and Nicotine. Journal
o Prosthodontics: 19(2); 118-6.
Khandaker M, Vaughan MB, White JJ, Meng Z, 2014. Effect of Additive
Particles on Mechanical, Thermal, and Cell Functioning Properties of
Poly(methylmethacrylate) Cement. J International of Nanomedicine; 9 : 2699-13.
Kortrakulkij K, 2008. Effect of Denture Cleanser on Color Stability and Flexural
Strength of Denture Base Materials. Thesis. Thailand: University of Mohidol; 1-73.
Li-ming Z et al, 2011. Preparation and Application of chitosan Nanoparticles and
Nanofibers. Braz J Chem Eng; 09: 353-362.
Li Z, Li T, An L, Fu P, Gao C, Zhang Z, 2016. Highly Efficient Chromium (VI)
Adsorbtion With Nanofibrous Filter Paper Prepared Through Electrospinning
Chitosan/Polymethylmethacrylate Composite. Journal Carbohydrate Polymer; 137;
119-126.
Lim E. 2015. Pengaruh Thermocycling dan Penambahan Serat Polietilen
terhadap Kekuatan Impak dan Transversal pada Bahan Basis Gigitiruan Resin Akrilik
Polimerisasi Panas. Tesis. Medan. FKG USU: 1-6.
Manappallil JJ, 2003. Basic Dental Materials. 2nd ed. New Delhi: Jaypee
Brothers Medical Publishers (P); 99-101, 106, 110, 118, 122-7.
MC Cabe JF, Walls AWG, 2008. Applied Dental Materials. 9th ed. London:
Blackwell; 110-23, 258-64.
Mowade TK, Dange SP, Thakre MB, Kamble VD, 2012. Effect of Fiber
Reinforcement on Impact Strength of Heat Polymerized Polymethyl Methacrylate
Denture Base Resin : In Vitro Study and SEM Analysis. J Adv Prosthodont; 4: 30-6.
Ningsih W. 2010. Pengaruh Viskositas larutan kitosan nanopartikel sebagai
Penyalut Asam Askorbat untuk Menyerap Asam Lemak Bebas (ALB) dalam Minyak
Goreng curah. Tesis: Medan: USU; 1-21.
Noort RV, 2008. Introduction to Dental Materials. 3rd ed. St.Louis : Mosby
Elvesier; 217-8, 221-2.
Universitas Sumatera Utara
94
Nugroho ACS, Nurhayati ND, Utami B, 2011. Sintesis dan Karakterisasi
Membran Kitosan Untuk Aplikasi Sensor Deteksi logam Berat. J Molekul; 6(2): 12313.
Paranhos HFO, Orsi IA, Zaniquelli O, Zuccolotto MCC, Magalheas F, 2008.
Effect Of Chemical Denture Cleaners On Flexural Resistance and Color Changes Of
Microwave-Polymerized Aclyric Resins. Braz J Oral Sci; 2(26): 1581.
Petri DFS, Donega J, Benassi AM, et al, 2007. Preliminary Study on Chitosan
Modified Glass Ionomer Restoratives. J Dent Materials; 23: 1004-10.
Powers JM, Wataha JC, 2008. Dental Materials: Properties and Manipulation. 9th
ed. Missouri: Mosby Inc; 205-15, 285-20.
Quasin SZU et al, 2010. Materials for Drug and Gene Delivery. International
Journal of Pharmaceutics; 385: 113-142.
Radhakumary C, Nair PD, Mathew S, Nair CPR. 2005. Biopolymer Composite
of Chotosan and Methyl Methacrylate for Medical Application. Trends Biomater
.Artif.Organs 18(2): 117-7.
Raszewski Z, Nowakowska D. 2013. Mechanical properties of hot curing acrilyc
resin after reinforced with different kinds of fibers. Int J Biomedical materials
research: 1(1); 9-13.
Saied HM. 2011. Influence of Dental Cleansers on the Color Stability and
Surface Roughness of Three Types of Denture bases. J Bagh College Dentistry;
23(3): 17-5.
Sermadi W, Prabhu S, Acharya S, Javali SB, 2014. Comparing the efficacy of
coconut oil and xylene as a clearing agent in the histopathology laboratory. J Oral
Maxillofac Pathol: 18(1): S49–S53.
Silalahi PFS. 2014. Efek Penambahan Kitosan Molekul Tinggi Nanopartikel
pada Abu Sekam Padi Nanopartikel Terhadap Viabilitas Sel Pulpa (In Vitro). Tesis.
Medan FKG USU:
Siregar M. 2009. Pengaruh berat molekul Kitosan Nanopartikel untuk
Menurunkan Kadar Logam Besi (Fe) dan Zat Warna pada Industri Tekstil Jeans.
Tesis. Medan: Pasca Sarjana USU; 5-9.
Siregar MZ, Agusnar H, Alfian Z, Marpaung H. 2015. Preparation and
Characterization Carbon Nanotubes-Chitosan nanocomposite by Using Oil Palm
Shell and Horseshoe Crab Shell. IJARC: 2(1); 6-7.
Universitas Sumatera Utara
95
Sugita P, Wukisari T, Sjahriza A, Wahyono A, 2009. Kitosan Sumber
Biomaterial Masa Depan. Bogor: IPB Press; 27, 82-108, 125.
Sun-Ok Fernandez-Kim, 2004. Physicochemical and Fungtional Properties of
Crawfish Chitosan as Affected by Different Processing Protocols. Thesis. Seoul:
B.S,Seoul National Univesity; 1-15.
Thermo Spectronic, 2013. Basic UV-Vis Theory, Concepts and Applications.
Availabel at http://www.thermoscientific.com diakses tanggal 28 Febuari 2015.
Tiyaboonchai M. 2003. Chitosan Nanoparticles: a promising system for drug
delivery . Nerasuan University Journal; 11(3): 51-15.
Trimurni A, Harry A, Wandania F. 2007. Efek Dentinogenesis Kitosan dan
Derivatnya Terhadap Inflamasi Jaringan Pulpa Gigi Reversibel. Laporan Akhir
Penelitian Riset Pembinaan IPTEK Kedokteran. Medan: FKG USU: 16-8,27-3.
Trimurni A. 2007. Inovasi Peraawatan Konservasi Gigi Melalui Teknologi
Tissue Engineering. Pidato Pengukuhan Jabatan Guru Besar Tetap dalam Bidang
Ilmu Konservasi Gigi pada Fakultas Kedokteran Gigi. Medan: 2.
Trong-Ming D, Shih-Chang H, Wen-Yen C. 2001. Structures and Thermal
Properties of Chitosan-Modified Poly(methyl methacrylate). J of Polymer Science:
39; 1646-9.
Vojvodic D, Komar D, Schauper Z, Celebic A, Mehulic K, Zabarovic D. 2009.
Influence of different glass fiber reinforcements on denture base polymer strength
(fiber reinforcements of dental polymer) Medicinski Glasnik: 6(2): 227-33.
Wen-Chuan H, Chih-Ponng C, Shang-Ming L, 2007. Morphology and
Characterization of 3D Micro-porous Structured Chitosan Scaffolds for Tissue
Enginerering. Elsevier: Colloids and Surfaces B: Biointerfaces; 57: 250-5.
Wieckiewicz M, Opitz V, Richter G, Boening KW, 2014. Physical Properties of
Polyamide-12 versus PMMA Denture Base Material. J BioMed Research
International; 1-7.
Yuliani D, 2013. pembuatan Emulsi Kitosan Cangkang Blankas Melalui Metode
Gelasi Ionik Terhadap Kitosan Nano Dengan Menggunakan Freezer-Dryer. Tesis.
Medan: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Sumatera
Utara; 9-12.
Universitas Sumatera Utara
DAFTAR PUSTAKA
Agusnar H, Nainggolan I, Sukirman, 2013. Mechanical Properties Of paper
From Oil Palm Pulp Treated With Chitosan From Horseshoe Crab. AENSI Journals
Advances In Eviromental Biology; 7(12): 3857-3.
Amer ZJA, Ahmed JK, Abbas SF, 2014. Chitosan/PMMA Bioblend for Drug
Release Applications. Int J Eng and Tech; 4(5): 1-6
Anusavice KJ, Shen C, Rawls HP, 2013. Phillips’ Science Of Dental Materials.
12th ed. USA : Elsevier Saunders; 89, 91, 261, 722, 724, 727-8, 735, 737, 739, 741-4.
Ariyani. 2012. Pengaruh Penambahan Fiber Glass Reinforced Terhadap
Penyerapan Air dan Stabilitas Warna Bahan Basis Gigitiruan Nilon Termoplastik.
Tesis. Medan: FKG USU.
Assuncao WG, Gomes EA, Barao VA, Barbosa DB, Tabata LF. 2010. Effect of
Storage inn Artificial Saliva and Thermal Cycling on Knoop Hardness of Resin
Denture Teeth. J Prosthodont Res; 54(3): 123-7.
Azeredo HMC, De Britto D, Assis OBG, 2010. Chitosan Edible Films and
Coatings-A Review. Nova Sci Pub Inc; 179-15.
Bashi TK, AL-Nema LM. 2009. Evaluation of some mechanical properties of
reinforce acrylic resin denture base material (an in vitro study). Al-Rafidain dent J;
9(1): 57-65.
Bettencourt AF, et.al. 2010. Biodegradation of Acrylic Based Resins: A review.
Elsvier: Dental Material; e171-e180.
Craig RG, Powers JM, Watana JC, 2000. Dental Material: Properties and
Manipulation. 7th ed. India: Mosby; 257-67.
El-Sheikh AM, Al-Zahrani SB. 2006. Causes of denture fracture: a survey: Saudi
Dent J. 18(3):149-53.
Flores-ramirez N, et all, 2008. Hybrid Natural-Synthetic Chitosan Resin:
Thermal and Mechanical Behavior. J Biomater Sci Polymer; 19(2): 259-14.
Foat F, Panza LHV, Gracia RCMR, Cury AADB, 2009. Impact and Flexural
Strength and Fracture Morphology Of Acrylic Resins With Impact Modifiers. J The
Open Dentistry; 3: 137-6.
Universitas Sumatera Utara
92
Gladwin M, Bagby M. Clinical Aspects Of Dental Materials, Theory, Practice
and Cases. 3rd ed. Philadelphia: Lippincort Williams & Wilkins 2009; 121-156.
Goguta L, Marsavina L, Bratu D, Topala F, 2006. Impact Strength Of Acrylic
Heat Curing Denture Base Resin Reinforced With E-Glass Fibers. TMJ; 56 (1): 1.
Goiato MC, Zulccolotti BCR, Santos DM, Moreno A, Alves-Rezende MCR.
2009. Effects of thermocycling on mechanical properyies of soft lining materials.
Acta Odontol latinoam:22(3): 227-32.
Gu ZY, Xue PH, Li WJ, 2001. Preparation of the Porous Chitosan Membrane by
Cryogenic Induced Phase Separation. Polym Adv Technol; 12: 665-4.
Gujjari AK, Bhatnagar VM, Basavaraju RM. 2013. Color Stability and Strength
of Poly(methyl methacrylate) and Bis-Acrylic Composite Based Provisional Crown
and Bridge Auto-polymerizing Resins Exposed to Beverages and Food Dye: An in
Vitro Study. Indian J Dent Res: 24(2); 172-5.
Hafner B, 2007. Scanning Electron Microscopy Primer. Characterization
Facility, University of Minnesota; 1-29.
Hanafiah IKA, 2003. Rancangan percobaan teori dan aplikasi. Jakarta: PT Raja
Grafindo Persada; 9.
Henny S. 2013. Efek Penambahan Kitosan Molekul Tinggi Nanopartikel Pada
Semen Ionomer Kaca Nanopartikel Terhadap Viabilitas Sel Pulpa (In Vitro). Tesis.
Medan: FKG USU; 7.
Henny S. 2014. Efek Penambahan Kitosan Blangkas (Tachypeleus gigas)
Nanopartikel pada Varian Semen Ionomer Kaca Terhadap Mikrostruktur Dentin dan
Komposisi Kimia Melalui SEM-EDX (in vitro). Tesis. Medan: FKG USU; 23-5.
Herguth WR, Nadeau G, 2004. Applications of Scanning Electron Microscopy
and Energy Dispersive Spectroscopy (SEM/EDS) to Practical Tribology Problems.
Herguth Lab Inc; 1-8.
Hipolito AC, Barao VA, Faverani LP, Ferreira MB, Assuncao WG. 2013. Color
Degradation of Acrylic Resin Denture Teeth as a Function of Liquid Diet:
Ultraviolet-Visible Reflection Analysis. J Biomed Opt: 18(10); 1-9.
Hu Q, Li B, Wang M, Shen J, 2003. Preparation and Characterization Of
Biodegradable Chitosan / Hidroxyapatite Nanocompisite Rods Via In Situ
Hybridization: A Potential Material As Internal Fixation Of Bone Fracture. Elsevier:
Biomaterial; 779-785.
Universitas Sumatera Utara
93
Hutapea PR. 2014. Efek dan Karakterisasi kitosan Molekul Tinggi Nanopartikel
pada Pasta Gigi Terhadap Penutupan Tubulus Dentin (In vitro). Tesis: Medan: FKG
USU; 28-7.
Imirzalioglu P, Karacaer, Yilmaz B, Ozmen I. 2010. Color Stability of Denture
Acrylic Resins and a Soft Lining Material Against Tea, Coffee, and Nicotine. Journal
o Prosthodontics: 19(2); 118-6.
Khandaker M, Vaughan MB, White JJ, Meng Z, 2014. Effect of Additive
Particles on Mechanical, Thermal, and Cell Functioning Properties of
Poly(methylmethacrylate) Cement. J International of Nanomedicine; 9 : 2699-13.
Kortrakulkij K, 2008. Effect of Denture Cleanser on Color Stability and Flexural
Strength of Denture Base Materials. Thesis. Thailand: University of Mohidol; 1-73.
Li-ming Z et al, 2011. Preparation and Application of chitosan Nanoparticles and
Nanofibers. Braz J Chem Eng; 09: 353-362.
Li Z, Li T, An L, Fu P, Gao C, Zhang Z, 2016. Highly Efficient Chromium (VI)
Adsorbtion With Nanofibrous Filter Paper Prepared Through Electrospinning
Chitosan/Polymethylmethacrylate Composite. Journal Carbohydrate Polymer; 137;
119-126.
Lim E. 2015. Pengaruh Thermocycling dan Penambahan Serat Polietilen
terhadap Kekuatan Impak dan Transversal pada Bahan Basis Gigitiruan Resin Akrilik
Polimerisasi Panas. Tesis. Medan. FKG USU: 1-6.
Manappallil JJ, 2003. Basic Dental Materials. 2nd ed. New Delhi: Jaypee
Brothers Medical Publishers (P); 99-101, 106, 110, 118, 122-7.
MC Cabe JF, Walls AWG, 2008. Applied Dental Materials. 9th ed. London:
Blackwell; 110-23, 258-64.
Mowade TK, Dange SP, Thakre MB, Kamble VD, 2012. Effect of Fiber
Reinforcement on Impact Strength of Heat Polymerized Polymethyl Methacrylate
Denture Base Resin : In Vitro Study and SEM Analysis. J Adv Prosthodont; 4: 30-6.
Ningsih W. 2010. Pengaruh Viskositas larutan kitosan nanopartikel sebagai
Penyalut Asam Askorbat untuk Menyerap Asam Lemak Bebas (ALB) dalam Minyak
Goreng curah. Tesis: Medan: USU; 1-21.
Noort RV, 2008. Introduction to Dental Materials. 3rd ed. St.Louis : Mosby
Elvesier; 217-8, 221-2.
Universitas Sumatera Utara
94
Nugroho ACS, Nurhayati ND, Utami B, 2011. Sintesis dan Karakterisasi
Membran Kitosan Untuk Aplikasi Sensor Deteksi logam Berat. J Molekul; 6(2): 12313.
Paranhos HFO, Orsi IA, Zaniquelli O, Zuccolotto MCC, Magalheas F, 2008.
Effect Of Chemical Denture Cleaners On Flexural Resistance and Color Changes Of
Microwave-Polymerized Aclyric Resins. Braz J Oral Sci; 2(26): 1581.
Petri DFS, Donega J, Benassi AM, et al, 2007. Preliminary Study on Chitosan
Modified Glass Ionomer Restoratives. J Dent Materials; 23: 1004-10.
Powers JM, Wataha JC, 2008. Dental Materials: Properties and Manipulation. 9th
ed. Missouri: Mosby Inc; 205-15, 285-20.
Quasin SZU et al, 2010. Materials for Drug and Gene Delivery. International
Journal of Pharmaceutics; 385: 113-142.
Radhakumary C, Nair PD, Mathew S, Nair CPR. 2005. Biopolymer Composite
of Chotosan and Methyl Methacrylate for Medical Application. Trends Biomater
.Artif.Organs 18(2): 117-7.
Raszewski Z, Nowakowska D. 2013. Mechanical properties of hot curing acrilyc
resin after reinforced with different kinds of fibers. Int J Biomedical materials
research: 1(1); 9-13.
Saied HM. 2011. Influence of Dental Cleansers on the Color Stability and
Surface Roughness of Three Types of Denture bases. J Bagh College Dentistry;
23(3): 17-5.
Sermadi W, Prabhu S, Acharya S, Javali SB, 2014. Comparing the efficacy of
coconut oil and xylene as a clearing agent in the histopathology laboratory. J Oral
Maxillofac Pathol: 18(1): S49–S53.
Silalahi PFS. 2014. Efek Penambahan Kitosan Molekul Tinggi Nanopartikel
pada Abu Sekam Padi Nanopartikel Terhadap Viabilitas Sel Pulpa (In Vitro). Tesis.
Medan FKG USU:
Siregar M. 2009. Pengaruh berat molekul Kitosan Nanopartikel untuk
Menurunkan Kadar Logam Besi (Fe) dan Zat Warna pada Industri Tekstil Jeans.
Tesis. Medan: Pasca Sarjana USU; 5-9.
Siregar MZ, Agusnar H, Alfian Z, Marpaung H. 2015. Preparation and
Characterization Carbon Nanotubes-Chitosan nanocomposite by Using Oil Palm
Shell and Horseshoe Crab Shell. IJARC: 2(1); 6-7.
Universitas Sumatera Utara
95
Sugita P, Wukisari T, Sjahriza A, Wahyono A, 2009. Kitosan Sumber
Biomaterial Masa Depan. Bogor: IPB Press; 27, 82-108, 125.
Sun-Ok Fernandez-Kim, 2004. Physicochemical and Fungtional Properties of
Crawfish Chitosan as Affected by Different Processing Protocols. Thesis. Seoul:
B.S,Seoul National Univesity; 1-15.
Thermo Spectronic, 2013. Basic UV-Vis Theory, Concepts and Applications.
Availabel at http://www.thermoscientific.com diakses tanggal 28 Febuari 2015.
Tiyaboonchai M. 2003. Chitosan Nanoparticles: a promising system for drug
delivery . Nerasuan University Journal; 11(3): 51-15.
Trimurni A, Harry A, Wandania F. 2007. Efek Dentinogenesis Kitosan dan
Derivatnya Terhadap Inflamasi Jaringan Pulpa Gigi Reversibel. Laporan Akhir
Penelitian Riset Pembinaan IPTEK Kedokteran. Medan: FKG USU: 16-8,27-3.
Trimurni A. 2007. Inovasi Peraawatan Konservasi Gigi Melalui Teknologi
Tissue Engineering. Pidato Pengukuhan Jabatan Guru Besar Tetap dalam Bidang
Ilmu Konservasi Gigi pada Fakultas Kedokteran Gigi. Medan: 2.
Trong-Ming D, Shih-Chang H, Wen-Yen C. 2001. Structures and Thermal
Properties of Chitosan-Modified Poly(methyl methacrylate). J of Polymer Science:
39; 1646-9.
Vojvodic D, Komar D, Schauper Z, Celebic A, Mehulic K, Zabarovic D. 2009.
Influence of different glass fiber reinforcements on denture base polymer strength
(fiber reinforcements of dental polymer) Medicinski Glasnik: 6(2): 227-33.
Wen-Chuan H, Chih-Ponng C, Shang-Ming L, 2007. Morphology and
Characterization of 3D Micro-porous Structured Chitosan Scaffolds for Tissue
Enginerering. Elsevier: Colloids and Surfaces B: Biointerfaces; 57: 250-5.
Wieckiewicz M, Opitz V, Richter G, Boening KW, 2014. Physical Properties of
Polyamide-12 versus PMMA Denture Base Material. J BioMed Research
International; 1-7.
Yuliani D, 2013. pembuatan Emulsi Kitosan Cangkang Blankas Melalui Metode
Gelasi Ionik Terhadap Kitosan Nano Dengan Menggunakan Freezer-Dryer. Tesis.
Medan: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Sumatera
Utara; 9-12.
Universitas Sumatera Utara