Sizes and Section Properties Wide Flange Shapes (ASTM A 6 Inch Series) 6 Wide Flange Shapes (JIS G 3192 Metric Series) 8 Fixed Outer Dimension H-Shapes JFE Super HISLEND-H (SHH) 10 Heavy Wide Flange H-Shapes 18 JFE Special Type H-Shapes J grip-H, Stripe-H

1. Introduction / 1

2. Applications / 2

3. Manufacturing Process / 3

4. Specifications

(1) Specifications / 4 (2) Corresponding specifications / 4 (3) Mechanical Properties / 5

5. Sizes and Section Properties

Wide Flange Shapes (ASTM A 6 Inch Series) / 6 Wide Flange Shapes (JIS G 3192 Metric Series) / 8 Fixed Outer Dimension H-Shapes JFE Super HISLEND-H (SHH) / 10 Heavy Wide Flange H-Shapes / 18 JFE Special Type H-Shapes J grip-H, Stripe-H, JFE Embossed-H / 23

6. Tolerances

(1) ASTM A 6 Tolerance on Dimension and Shape of Wide Flange Shapes / 24 (2) BS EN10034 Tolerances on shape and dimensions / 25 (3) JIS G 3192, 3136 Tolerance on Dimension and Shape / 26 (4) KS D 3502 Tolerance on Dimension and Shape / 27

7. Label / 28

1 Introduction

Cities in redevelopment, high-rise buildings under construction, freeways undergoing modernization – these and many other projects call for wide flange shapes. Because of their outstanding properties, wide flange shapes are widely used for beams, columns and other architectural members, as well as in pile foundations, bridges and other civil engineering works.

Japan's first wide flange shapes were produced in 1961 on JFE Steel Corporation's universal mill. Since then, JFE Steel has been supplying superior quality wide flange shapes based on advanced technology, efficient equipment and intensive research and development activities. JFE Steel's wide flange shapes are available up to 1000 mm in web height and 515 mm in flange width.

Further, JFE Steel's whole production process for order booking through shipment is handled by an advanced computer-controlled order processing system, so the company can provide customers with better service for any requirement.

Features of JFE Steel's Wide Flange Shapes:

1 Sophisticated properties that satisfy the

needs of the day perfectly.

2 A simple configuration, yet excellent

cross-sectional performance.

3 Multipurpose application in broad range of

crosssectional configurations with other shapes.

Marked reduction in construction costs and

4 time through rationalized design work, faster fabrication, and easier on-site execution.

2 Applications

Opera House

Metropolitan Government Office building

Sound insulating walls

Cofferdams

High-rise building

Station building

Warehouse

3 Manufacturing Process

Continuous casting facility

Bloom

Beam blank

Basic Oxygen

Blast Furnace

Furnace

Ingotting

Blooming mill

E1

Tongs

U1

cutting saw

Continuous

Descaling device

reheating furnace

(to remove

Rough rolling

Interim rolling machine

oxidation films)

machine

(U1 : Rough universal mill)

(Breakdown mill)

(E1 : Edging mill)

Roller straightener (reformer) Hot saw

Cooling

Inspection

Cooling bed (walking

Finish rolling machine

beam type)

(UF mill)

Press reformer (pressed in Horizontal and vertical directions)

Product

Rough universal mill

Cooling bed

Roller straightener

Shipment of products

4 Specifications

(1) Specifications

ASTM

ASTM A36, A572

BS

BS EN10025-2

JIS G 3136 (SN400A, B, C, SN490B, C)

JIS

JIS G 3101 (SS400) JIS G 3106 (SM400A, B, C, SM490A, B, C,SM490YA, YB)

KS KS D 3503 (SS400)

KS D 3515 (SM400A, SM400B, SM490A, SM490B)

(2) Corresponding Specifications

Specification

Inch H

JIS H

Fixed

Heavy

Special Type

Stripe-H Embossed H ASTM

ASTM A6

JIS G 3192

Dimension Wide Flange

J grip-H

A36 A572 Gr.50 A992

BS EN10025-2

S275JR

S275J0

S355JR

* JIS G 3101

S355J0

SS400

JIS G 3106

SM400A

SM400B SM490A

SM490B

SM490YA SM490YB

JIS G 3136

SN400A SN400B SN490B

KS D 3503

SS400

KS D 3515

SM400A

SM400B SM490A

SM490B

Some sizes are not manufacturable ; consult us in advance. Please consult us in advance about the tolerances of the shapes and dimensions marked with .

* : Test pieces for charpy v-notch testing applies 1/2 size specimens.

(3) Mechanical Properties

ASTM

Yield to Tensile Ratio Type

Yield Strength

Tensile Strength

(MPa)

(MPa)

max A36

min/max

min/max

- A572 Gr.50

- * : For wide flange shapes with flange thickness over 3 in. [75mm], the 80 ksi [550MPa] maximum tensile strength does not apply.

BS EN10025-2

Yield Strength

Tensile Strength

Impact Test

(MPa)

(MPa)

Designation

min/max

min/max

Tempe- Minimum

16mm ＜ ≦16mm 40mm ＜

63mm ＜

80mm ＜

100mm ＜

3mm ≦

100mm ＜

rature Energy

( ℃) (J) S275JR

≦40mm

≦63mm

≦80mm

≦100mm

≦150mm

≦100mm

≦150mm

20 27 S275J0

0 27 S355JR

20 27 S355J0

JIS G 3101, 3106, 3136

Yield Strength

Tensile

Yield to

Impact Test

(MPa)

Strength

Tensile Ratio

Designation

Tempe- Minimum 6mm≦

min/max

(MPa)

max (%)

rature Energy ＜12mm

12mm ＜

≦16mm 12 ≦40mm ≦75mm ≦100mm ≦100mm ≦

16mm ＜

40mm ＜

75mm ＜

( ℃) (J) SS400

- - SM400A

- - SM400B

0 27 SM490A

- - SM490B

0 27 SM490YA

- - SM490YB

0 27 SN400A

- - SN400B

80 0 27 SN490B

KS D 3503, 3515

Yield Strength

Tensile

Impact Test

(MPa)

Strength

Yield to

Designation

min/max

(MPa)

Tensile

Tempe- Minimum 6mm≦

rature Energy ＜12mm

12mm ＜

16mm ＜

40mm ＜

75mm ＜

Ratio

( ℃) (J) SS400

≦100mm

≦16mm

≦40mm

≦75mm

≦100mm

max (%)

- - SM400A

- - SM400B

0 27 SM490A

- - SM490B

0 27 Refer to each standard for chemical composition.

Wide Flange Shapes (ASTM A 6 Inch Series)

S 5 izes and Section Properties

W920 x 420 (W36 x 16 1/2 )

W920 x 310 (W36 x 12)

W840 x 400 (W33 x 15 3/4 )

W760 x 380 (W30 x 15)

W690 x 360 (W27 x 14)

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre (kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

r tf tw b h lbs/ft hxb lbs/ft

Second Moment

of Area (cm 4 )

Elastic Modulus (cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

W610 x 325 (W24 x 12 3/4 )

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

W310 x 310 (W12 x 12)

W360 x 370 (W14 x 14 1/2 )

W360 x 410 (W14 x 16)

W610 x 230 (W24 x 9)

96.7

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre

(kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

r tf tw b h lbs/ft hxb lbs/ft

Second Moment

of Area (cm 4 )

Elastic Modulus

(cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

Wide Flange Shapes (JIS G 3192 Metric Series)

Large Width

Medium Width

Notes : Some sizes are not manufactured constantly, so please contact us in advance. Standard of sizes marked with * are SS and SM.

S 5 izes and Section Properties

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre

(kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

r tf tw b h hxb h

Second Moment

of Area (cm 4 )

Elastic Modulus (cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

Medium Width

Small Width

91.8 Notes : Some sizes are not manufactured constantly, so please contact us in advance.

Standard of sizes marked with * are SS and SM.

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre

(kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

r tf tw b h hxb h

Second Moment

of Area (cm 4 )

Elastic Modulus

(cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

Fixed Outer Dimension H-Shapes

S 5 izes and Section Properties

JFE Super HISLEND-H (SH)

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

SH 1000 x 400

SH 1000 x 350

SH 1000 x 300

SH 1000 x 250

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre (kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

r tf tw b h hxb h

Second Moment

of Area (cm 4 )

Elastic Modulus

(cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre (kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

r tf tw b h hxb h

Second Moment

of Area (cm 4 )

Elastic Modulus

(cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

Fixed Outer Dimension H-Shapes

S 5 izes and Section Properties

JFE Super HISLEND-H (SH)

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre (kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

Iy

tf tw b h hxb h

Second Moment

of Area (cm 4 )

Elastic Modulus

(cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre (kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

Iy

tf tw b h hxb h

Second Moment

of Area (cm 4 )

Elastic Modulus

(cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

Fixed Outer Dimension H-Shapes

S 5 izes and Section Properties

JFE Super HISLEND-H (SH)

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre (kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

r tf tw b h hxb h

Second Moment

of Area (cm 4 )

Elastic Modulus

(cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre (kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

r tf tw b h hxb h

Second Moment

of Area (cm 4 )

Elastic Modulus

(cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

Fixed Outer Dimension H-Shapes

S 5 izes and Section Properties

JFE Super HISLEND-H (SH)

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre (kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

r tf tw b h hxb h

Second Moment

of Area (cm 4 )

Elastic Modulus

(cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre (kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

r tf tw b h hxb h

Second Moment

of Area (cm 4 )

Elastic Modulus

(cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

Heavy Wide Flange H-Shapes

700 x 500

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

S 5 izes and Section Properties

(700 x 500 series)

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre (kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

Iy

tf tw b h Web Thickness hxb Thickness

Second Moment

of Area (cm 4 )

Elastic Modulus (cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

(500 x 500 series)

500 x 500

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre

(kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

Iy

tf tw b h Web Thickness hxb Thickness

Second Moment of Area (cm 4 )

Elastic Modulus

(cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

Heavy Wide Flange H-Shapes

500 x 500

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

S 5 izes and Section Properties

(500 x 500 series)

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre (kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

r tf tw b h Web Thickness hxb Thickness

Second Moment

of Area (cm 4 )

Elastic Modulus (cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

(400 x 400 series)

400 x 400

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre (kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

r tf tw b h Web Thickness hxb Thickness

Second Moment

of Area (cm 4 )

Elastic Modulus

(cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

Heavy Wide Flange H-Shapes

400 x 400

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

S 5 izes and Section Properties

(400 x 400 series)

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre (kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

Iy

tf tw b h Web Thickness hxb Thickness

Second Moment

of Area (cm 4 )

Elastic Modulus (cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

Embossed-H

Stripe-H

J grip-H

Notes : Some sizes are not manufactured constantly, so please contact us in advance.

Grid pattern Longitudinal type

JFE Special Type H-Shapes J grip-H, Stripe-H, JFE Embossed-H

J grip-H

Stripe-H

JFE Embossed-H

JFE Embossed-H

J-grip H and Stripe-H have been developed for steel-concrete composite structure. Embossed H-Shapes have been developed for Steel Road Deck. For more information, please consult us.

Grid pattern type

Longitudinal type

Section Dimensions

(mm)

Area of Section

(cm 2 )

Mass per

Metre (kg/m)

Axis z - z Wpl. z

Axis y - y Wpl. y

Axis z - z Wel. z

Axis y - y

Wel. y

Axis z - z

Iz

Axis y - y

Iy

tf tw b h hxb h

Second Moment

of Area (cm 4 )

Elastic Modulus

(cm 3 )

Plastic Modulus (cm 3 )

Nominal Size

6 Tolerances

(1) ASTM A 6 Tolerance on Dimension and Shape of Wide Flange Shapes

Permissible Variations in Cross Section for W and HP Shapes

1/2B E B 1/2B E B

C A C A A is measured at center line of web for W and HP shapes.

C is measured parallel to web.

1/2B E

1/2B E

A, Depth, in.

B, Flange Width, in.

E, Web

C, Maximum

Depth at Shape

Section

Flanges

off

Nominal Sizes

Out-of-

Center, any Cross Section

in.

Theoretical Theoretical Theoretical Theoretical Square,

Over

Under

Over

Under

max,

over Theoretical

max, in.

in.*

Depth, In.

1/4 W and HP

Up to 12, incl.

1/4 *Variation of 5/16 in. max for sections over 426 lb/ft.

Over 12

Permissible Variations in Ends Out-of-Square for W and HP Shapes

The ends out-of-square tolerance for W and HP shapes shall be 1/64 in./in. of depth, or of flange width if it is greater than the depth.

Permissible Variations in Straightness for W and HP Shapes

Positions for Measuring Camber and Sweep of W and HP Shapes

CAMBER

SWEEP

Permissible Variation Camber and sweep A

B 1/8 in. (number of feet of total length /10) When certain sections with a flange width approximately

equal to depth are specified, order as columns: Lengths of 45 ft and under

1/8 in. (number of feet of total length /10) but not over 3/8in. Lengths over 45 ft

3/8 in. (1/8 in. ( number of feet of total length– 45 /10)

A Sections with a flange width less than 6 in., tolerance for sweep = 1/8 in. (number of feet of total length/5).

B Applies only to: 8-in. deep section 31 lb/ft and heavier,

10-in. deep sections 49 lb/ft and heavier, 12-in. deep sections 65 lb/ft and heavier, and 14-in. deep sections 90 lb/ft and heavier.

If other sections are specified on the order as columns, the tolerance will be subject to negotiation with the manufacturer.

(2) BS EN10034 Tolerances on shape and dimensions

Table 1 Dimensional tolerance

s Y t*

h X X b/4

Flange thickness t height

Section height h

Flange width b

Web thickness s

tickness tolerance mm

tolerance

width

tolerance

thickness

tolerance

mm

mm

mm

mm

mm

mm

mm

h ≦ 180 ＋ 3.0, − 2.0 b ≦ 110 ＋ 4.0, − 1.0 s ＜ 7 ±0.7

t ＜ 6.5 ＋ 1.5, − 0.5

180 ＜ h ≦ 400 ＋ 4.0, − 2.0 110 ＜ b ≦ 210 ＋ 4.0, − 2.0 7 ≦ s ＜ 10 ±1.0

6.5 ≦ t ＜ 10 ＋ 2.0, − 1.0

400 ＜ h ≦ 700 ＋ 5.0, − 3.0 210 ＜ b ≦ 325 ＋ 4.0, − 4.0 10 ≦ s ＜ 20 ±1.5

10 ≦ t ＜ 20 ＋ 2.5, − 1.5

h ＞ 700 ＋ 5.0, − 5.0 b ＞ 325 ＋ 6.0, − 5.0 20 ≦ s ＜ 40 ±2.0

20 ≦ t ＜ 30 ＋ 2.5, − 2.0

40 ≦ s ＜ 60 ±2.5

30 ≦ t ＜ 40 ＋ 2.5, − 2.5

s ≧ 60 ±3.0

40 ≦ t ＜ 60 ＋ 3.0, − 3.0 t ≧ 60 ＋ 4.0, − 4.0

Table 2 Tolerance on out-of-square and web off-centre Table 3 Tolerance on straightness

out-of-square

Tolerance on k + k'

web off-centre

= b 1 -b 2

e where e

q xx and q yy flange width b

2 Section height h

straightness

on length L mm

tolerance

flange width b

tolerance

mm

mm

mm

mm

b ≦ 110 1.5 Where t ＜ 40 80 ＜ h ≦ 180 0.30L

b ＞ 110 2% of b (max 6.5mm)

b ≦ 110 2.5 180 ＜ h ≦ 360 0.15L 110 ＜ b ≦ 325 3.5 h ＞ 360 0.10L

b ＞ 325 5.0 Where t ≧ 40 110 ＜ b ≦ 325 5.0

b ＞ 325 8.0

Tolerance on length

The sections shall be cut to ordered lengths to tolerance of:

a) ±50mm; or

b) ＋100mm where minimum lengths are required L represents the longest useable length of the section assuming that the ends of the section have been cut square (see Figure 1)

L max. Figure 1 Measurement of length L

6 Tolerances

(3) JIS G 3192, 3136 Tolerance on Dimension and Shape

unit : mm

JIS G3136 : SN

Fixd Outer Dimension

Heavy Wide Flange R

JIS G3192:SS, SM

(Super HISLEND-H)

H-Shapes

em

Tolerance

ar

Range

Range

Tolerance

Range

Tolerance

JIS G3136 JIS G3192

ks

Width

B ≦ 400 ± 2.0

(B)

400 ＜ B ± 3.0

B ≦ 400 ± 2.0

Depth

H ＜ 800

400 ＜ B ± 3.0 ー

(H)

800 ≦ H ± 3.0

ー Flange

6 ≦ t 2 ＜ 16 ＋ 1.7 − 0.3 ± 1.0 *

t 2 ＜ 16 ＋ 1.7   − 0.3 ー

16 ≦ t 2 ＜ 25 ± 1.5 A (t )

＋ 2.3 − 0.7 * 16 ≦ t 2 ＜ 40 ＋ 2.3   − 0.7 16 ≦ t ＜ 2 2 40 ＋ 2.3   − 0.7

25 ≦ t 2 ＜ 40 ± 1.7

Thick-

40 ≦ t 2 ＋ 2.5 − 1.5 ± 2.0 *

40 ≦ t 2 ＋ 2.5   − 1.5 40 ≦ t 2 ＋ 2.5   − 1.5

ness t 1 ＜ 16 ± 0.7 t 1 ＜ 16 ± 0.7 t 1 ＜ 16 ± 0.7

Web

16 ≦ t 1 ＜ 25 ± 1.0 16 ≦ t 1 ＜ 25 ± 1.0 16 ≦ t 1 ＜ 25 ± 1.0

(t 1 )

25 ≦ t 1 ＜ 40 ± 1.5 25 ≦ t 1 ＜ 40 ± 1.5 25 ≦ t 1 ＜ 40 ± 1.5

40 ≦ t 1 ± 2.0 ー

40 ≦ t 1 ± 2.0

L ≦ 7000 ＋ 40.0 − 0 L ≦ 7000 ＋ 40.0 − 0 L ≦ 7000 ＋ 40.0 − 0

＋ tolerance Length

＋ tolerance

＋ tolerance

increases 5mm for (L)

increases 5mm for

increases 5mm for

7000 ＜ L the increment of

7000 ＜ L the increment of

7000 ＜ L the increment of

every 1m or

every 1m or

every 1m or

fraction thereof.

fraction thereof.

fraction thereof.

≦ 0.01B

The minimum

B ≦ 200 ≦ 0.01B

Flange

H ≦ 300 tolerance shall be

Out-of-

1.5mm.

200 ＜ B ≦ 300 ≦ 2.0

≦ 4.0 B

squareness

≦ 0.012B

(T)

300 ＜ H The minimum

300 B 3.0

tolerance shall be

1.5mm.

C Out-of-

Bend

0.01b (t)

B ≦ 400

0.015b

0.01b

and ≦1.5

and ≦1.5

and ≦1.5

H ≦ 300 ≦ 0.0015L

0.001L squareness (t) ー ≦

≦ 0.001L ー

300 ＜ H ≦ 0.001L

Web off Center

B ≦ 400 ± 2.0

(S) ー ± 2.0 ー ± 2.0 D

400 ＜ B ± 3.5

≦ 0.016H or ≦ 0.016H or ≦ 0.016H or Ends

≦ 0.016B ≦ 0.016B ≦ 0.016B Out-of-square

E (e)

The minimum

The minimum

The minimum

tolerance shall be

tolerance shall be

tolerance shall be

3.0mm.

3.0mm.

3.0mm.

H ≦ 350 ≦ 2.0

Comber of Web

350 ＜ H ＜ 550 ≦ 2.5 ≧ ( ) 400 ≦ 2.0 F appellative depth

H ＜ 600 ≦ 2.0

550 ≦ H ≦ 3.0 600 ≦ H ≦ 3.0

Items marked with * are the tolerances of SN standard. SS and SM standards conform to JIS G3192.

4 TT

(4) KS D 3502 Tolerance on Dimension and Shape

unit : mm Classification

Tolerance

Remarks

Flange, 110 & under

Width (B) B

Over 110 to 210, incl.

Over 210 to 325, incl.

Over 325

Depth, 180 & under

Over 180 to 400, incl.

Depth (H)

Over 400 to 700, incl.

Over 700

under 7

7 to 10, excl.

10 to 20, excl.

20 to 40, excl.

Thickness

under 6.5

6.5 to 10, excl.

t 2 10 to 20, excl.

20 to 30, excl. 4 ＋2.5, −2.0

30 to 40, excl.

Flange, 110 & under

T ＋T'＝1.5mm

TT

Over 110

T ＋T'＝2%×(B)

Out-of-square (T)

(max. 6.5mm)

T' T'

Flange, 110 & under

Web off Center (S)

Over 110 to 325, incl.

3.5 S = b 1 - b b 2 1 b 2 2

Over 325

Depth, 180 & under

≦ L × 0.30%

q xx Length : L

Camber and Sweep

Over 180 to 360, incl.

≦ L × 0.15%

q yy

Over 360

≦ L × 0.10% ≦ (B, H) × 1.6%

Ends Out-of-square

(min. 3.0mm)

Length

Nominal Depth, under 400

400 to 600, excl.

Web flatness (W)

600 & over

Radius. 10 & under

Radius (r)

Over 10 to 20, incl.

Over 20

7 Label

A label is attached to the web center at the end of the Wide Flange Shape. The description of the label is as follows.

Senior Size

WK

EN10025-S355JR

12 x12 x106LBS

1J00073-10

# 1-84340 K653 & %

LN910-C C717 M2863-500 P

MADE IN JAPAN

Corporate insignia

% Codes for production control

Works code

& Lot No.

! Standard designation

' Contract No. – Order item No.

" Cross-sectional dimension

Product No.

# Heat No.

Bar code

$ Length

Shipping information

For further information, please contact our nearest office or send your inquiries to :

Export Dept. Plate & Structural Sec.

Phone : (03) 3597-4132 Fax : (03) 3597-4159

Cat.No.D1E-101-03

Hibiya Kokusai Building, 2-3 Uchisaiwaicho 2-chome, Chiyodaku, Tokyo 100-0011, Japan Phone : (81)3-3597-3111

http://www.jfe-steel.co.jp/en/

JFE Steel Asia Pte. Ltd.

16 Raffles Quay, No. 15-03, Hong Leong Building, 048581, Singapore Phone : (65)6220-1174

JFE Steel America, Inc. 600 Third Avenue, 12th Floor, New York, NY 10016, U.S.A. Phone : (1)212-310-9320

JFE Steel Australia Resources Pty Ltd. Level 19, CPA Centre, 307 Queen St, Brisbane, QLD 4001, Australia Phone : (61)7-3229-3855

JFE Steel India Private Limited 1101, 11th Floor, Unitech‘s Signature Tower, Tower-A, South City-I, NH-8, Gurgaon, Haryana, 122002, India Phone : (91)124-426-4981

JFE Steel (Thailand) Ltd.

22nd Floor, Abdulrahim Place 990, Rama IV Road, Bangkok 10500, Thailand

Phone : (66)2-636-1886

JFE Steel Corporation, Jakarta Office

16th Floor Summitmas II , JL Jendral Sudirman Kav. 61-62, Jakarta 12190, Indonesia

Phone : (62)21-522-6405 JFE Steel Corporation, Manila Office

23rd Floor 6788 Ayala Avenue, Oledan Square, Makati City, Metro Manila, Philippines Phone : (63)2-886-7432

JFE Steel Korea Corporation 6th Floor. Geumgang-Tower. 889-13, Daechi-dong, Gangnam-gu, Seoul, 135-570, Korea Phone : (82)2-3468-4130

JFE Steel Corporation Beijing 1009 Beijing Fortune Building No.5, Dongsanhuan North Road, Chaoyang District, Beijing, 100004, P.R.China Phone : (86)10-6590-9051

JFE Consulting (Shanghai) Co., Ltd. Room 801, Building A, Far East International Plaza, 319 Xianxia Road, Shanghai 200051, P.R.China Phone : (86)21-6235-1345

JFE Steel do Brasil LTDA / JFE Steel Corporation, Rio de Janeiro Office Praia de Botafogo, 228 Setor B, Salas 508 & 509, Botafogo, CEP 22250-040, Rio de Janeiro-RJ, Brazil Phone : (55)21-2553-1132

JFE Steel India Private Limited Mumbai Office 308, A Wing, 215 Atrium, Andheri - Kurla Road, Andheri (East), Mumbai - 400093, Maharashtra, India Phone : (91)22-3076-2760

JFE Steel Europe Limited 15th Floor, The Broadgate Tower, 20 Primrose Street, London EC2A 2EW, U.K. Phone : (44)20-7426-0166

JFE Steel Corporation, Dubai Office P.O.Box 261791 LOB19-1208, Jebel Ali Free Zone Dubai, U.A.E. Phone : (971)4-884-1833

JFE Steel Vietnam Co., Ltd. Unit 1401, 14th Floor, Kumho Asiana Plaza, 39 Le Duan Street, Dist 1, HCMC, Vietnam Phone : (84)8-3825-8576

JFE Consulting (Guangzhou) Co., Ltd./ JFE Steel Corporation, Guangzhou Office Room 3901, Citic Plaza, 233 Tian He North Road, Guangzhou 510613, P.R.China Phone : (86)20-3891-2467

JFE Steel America, Inc., Houston Office 10777 Westheimer, Suite 230, Houston, TX 77042, U.S.A. Phone : (1)713-532-0052

TOKYO HEAD OFFICE NEW YORK OFFICE HOUSTON OFFICE BRISBANE OFFICE RIO DE JANEIRO OFFICE LONDON OFFICE DUBAI OFFICE NEW DELHI OFFICE MUMBAI OFFICE SINGAPORE OFFICE BANGKOK OFFICE VIETNAM OFFICE JAKARTA OFFICE MANILA OFFICE SEOUL OFFICE BEIJING OFFICE SHANGHAI OFFICE GUANGZHOU OFFICE

Fax : (81)3-3597-4860

Fax : (65)6224-8357

Fax : (1)212-308-9292

Fax : (61)7-3229-4377

Fax : (91)124-426-4982

Fax : (66)2-636-1891

Fax : (62)21-522-6408

Fax : (63)2-886-7315

Fax : (86)21-6235-1346

Fax : (55)21-2553-3430

Fax : (91)22-3076-2764

Fax : (44)20-7247-0168

Fax : (971)4-884-1472

Fax : (84)8-3825-8562

Fax : (86)20-3891-2469

Fax : (1)713-532-0062

Fax : (86)10-6590-9056

Fax : (82)2-3468-4137

Notice While every effort has been made to ensure the accuracy of the information contained within this publication, the use of the information is at the reader’s risk and no warranty is implied or expressed by JFE Steel Corporation with respect to the use of information contained herein. The information in this publication is subject to change or modification without notice. Please contact the JFE Steel office for the latest information.

Any reproduction, modification, translation, distribution, transmission, uploading of the contents of the document, in whole or in part, is strictly prohibited

Copyright © JFE Steel Corporation. All Rights Reserved.

1308P(1301)1-0.8 SPa