1. Home
  2. Lainnya

PRODUCT QUALITY OF METALLIC MINIATURE COMPONENT

PRODUCT QUALITY OF METALLIC MINIATURE COMPONENT

Rusnaldy, Ismoyo Hariyanto, Yusuf Umardani,
Paryanto, Norman Iskandar
Department of Mechanical Engineering
Diponegoro University

Abstract
Micro forming is an appropriate technology to produce miniature components
because of high production rate and because it can create 3D complex
features. A number of technological barriers must be overcome for micro
forming to be applied in the production of metallic miniature components. One
of these barriers is dimensional measurement for product quality inspection. In
this study cold headed miniature part was produced by micro forging
experiments. The experiments were aimed at considering the effects of forging
load and annealing process on product quality of cold headed miniature part.
The experimental results show that annealing process and forging load have a
significant effect on roundness, dimensional accuracy, and surface roughness.
Keywords: Micro forming, product quality, forging load, annealing process

Universitas Diponegoro


Dokumen yang terkait

Manufacturing of Medium Quality of Fatty Acid Through Distillation of Hidrogenated Splitted Palm Fatty Acid Distillate

0 30 6

Application of Quality Function Deployment (QFD) For Quality Improvement of Suwar Suwir Product

0 5 9

Analisis faktor-faktor yang mempengaruhi perpindahan merk (brand switching )pada konsumen biore facial foam facial fit-expert : studi kasus pada perempuan di daerah ciputat

2 22 310

Utilization of glycerol by product of jatropha biodiesel production as coal dust suppressant component

0 10 210

Pengaruh Kualitas Pelayanan, Harga dan Kualitas Produk terhadap Kepuasan Konsumen dan Dampaknya terhadap Word Of Mouth (Studi Kasus Warung Spesial Sambal Cabang Bintaro 1)

24 262 198

Pengaruh Store Atmosphere, Promosi Penjualan, Kualitas Produk dan Kualitas Pelayanan Terhadap Impulse Buying (Studi Kasus Pada Konsumen ACE Hardware Pondok Indah Mall)

19 153 178

Utilization of glycerol by product of jatropha biodiesel production as coal dust suppressant component

0 2 118

Experimental Analysis Of Earth Battery Using Different Combination Of Metallic And Non-Metallic Solid.

0 2 24

SEAWEED DODOL OF AULIA SARI SMALL MEDIUM ENTERPRISE PRODUCT QUALITY IMPROVEMENT USING KANO MODEL AND PRODUCT QUALITY DIMENSION INTEGRATION

0 0 8

Quality evaluation of shrimp by-product complete ration pellets

0 0 9