60 GPSMAP 60CSx Owner’s Manual
map. The point is marked by the Map Pointer with location coordinates, the compass bearing
and distance from your current location.
3. Press QuIt to close.
resetting data You can reset the elevation data and the maximum
elevation data by selecting these options from the Reset Page.
to reset the elevation data and max elevation ields:
1. Press MEnu to open the Altimeter Page
Options Menu.
2. Highlight reset, and press EntEr to open the
Reset Page.
3. Use the rocKEr to highlight a reset option, and then press EntEr to place a check
mark in the box next to the selected item. You can reset elevation data such as Minimum
Elevation, all Ascent and Descent data, or only the Maximum Elevation.
reset Page
4. Highlight the Apply button, and press EntEr
to reset the data ields. A conirmation message appears.
You can reset or delete data for any of the other features represented on the list by
placing a check mark in the box next to the item.
5. Highlight Apply, and press EntEr to reset
the selected options. 6. To reset all categories shown on the page,
highlight Select All, and press EntEr. Then
repeat step 5 above.
GPSMAP 60CSx Owner’s Manual 6
Because the GPSMAP 60CSx relies on the barometric pressure to determine the elevation, and the pressure
at any given elevation can luctuate, you can calibrate the altimeter to increase its accuracy. You must know
the elevation or pressure at your current location.
to manually calibrate the altimeter:
1. Press MEnu to open the Altimeter Page
Options Menu.
2. Highlight calibrate Altimeter, and press EntEr
to open the Calibration Page. 3. At the message “Do You Know The Correct
Elevation?” highlight the Yes button, and press EntEr
.
or If you do not know the elevation, select no to
use the pressure option. If you do not know
the pressure, select no to use the default GPS
elevation.
4. Use the rocKEr to enter the new elevation or pressure, then highlight oK and press
