On the Welcome screen, click Next.

Configuring High Availability for Identity Management Components 8-217 Start the installer for Oracle Fusion Middleware as follows: OAAMHOST1 runInstaller When the installer prompts you for a JREJDK location, enter the Oracle SDK location created in the Oracle WebLogic Server installation, for example, ORACLE_ BASEproductfmwjrockit_160_14_R27.6.5-32. Then proceed as follows:

1. On the Welcome screen, click Next.

2. On the Prerequisite Checks screen, verify that the checks complete successfully, then click Next. 3. On the Specify Installation Location screen, enter the following values: ■ Oracle Middleware Home: Select the previously installed Middleware home from the list for MW_HOME, for example: u01apporacleproductfmw ■ Oracle Home Directory: – Enter idm as the Oracle Home directory name when installing the Oracle Identity Management Suite in the IDM_ORACLE_HOME. – Enter iam as the Oracle Home directory name when installing the Oracle Identity and Access Management Suite in the IAM_ORACLE_HOME. – Enter soa as the Oracle Home directory name when installing the Oracle SOA Suite in the SOA_ORACLE_HOME. Click Next. 4. On the Installation Summary screen, click Install and Configure. 5. In the Welcome screen, select Create a New WebLogic Domain, and then click Next . 6. In the Select Domain Source Screen: Select Generate a domain configured automatically to support the following products : And select the following products: ■ Oracle Enterprise Manager ■ Oracle JRF selected by default ■ Oracle Adaptive Access Manager - Server ■ Oracle Adaptive Access Manager Admin Server Click Next. 7. In the Specify Domain and Location screen enter: ■ Domain name : IDM_Domain ■ Domain Directory : Accept the default. ■ Application Directory : Accept the default. Click Next. 8. In the Configure Administrator Username and Password screen, enter the username and password to be used for the domains administrator, and click Next. 8-218 Oracle Fusion Middleware High Availability Guide 9. In the Configure Server Start Mode and JDK screen, make the following selections: ■ WebLogic Domain Startup Mode : Select Production Mode. ■ JDK Selection : Select JROCKIT SDK1.6.0_17 SDK. 10. In the Configure JDBC Component Schema screen, select all of the data sources, then select Configure selected data sources as RAC multi data sources. Click Next. 11. In the Configure RAC Multi Data Source Component Schema screen, select the first data source, OAAM Admin Server, and enter the following: ■ Data source : OAAM Admin Server ■ Service Name : oaam.mycompany.com ■ User Name : OAAM_OAAM assuming OAAM was used as the RCU prefix ■ Password : The password for above account In the top right box, click Add to add an Oracle RAC host. Enter the following information: ■ Host Name : OAAMDBHOST1 ■ Instance Name : oaamdb1 ■ Port : 1521 Click Add again to add the second database host and enter the following information: ■ Host Name : OAAMDBHOST2 ■ Instance Name : oaamdb2 ■ Port : 1521 Deselect this data source. Select the next data source, OAAM Admin MDS Schema , and enter the following information: ■ Data Source : OAAM Admin MDS Schema ■ Service Name : oaam.mycompany.com ■ User Name : OAAM_MDS assuming OAAM was used as the RCU prefix ■ Password : Password for the OAAM_MDS account. In the top right box, click Add to add an Oracle RAC host. Enter the following information: ■ Host Name : OAAMDBHOST1 ■ Instance Name : oaamdb1 ■ Port : 1521 Click Add again to add the second database host and enter the following information: ■ Host Name : OAAMDBHOST2 ■ Instance Name : oaamdb2 ■ Port : 1521 Deselect this data source. Select the next data source, OAAM Server, and enter the following information: Configuring High Availability for Identity Management Components 8-219 ■ Data Source : OAAM Server ■ Service Name : oaam.mycompany.com ■ User Name : OAAM_OAAM assuming OAAM was used as the RCU prefix ■ Password : Password for the OAAM_OAAM account. In the top right box, click Add to add an Oracle RAC host. Enter the following information: ■ Host Name : OAAMDBHOST1 ■ Instance Name : oaamdb1 ■ Port : 1521 Click Add again to add the second database host and enter the following information: ■ Host Name : OAAMDBHOST2 ■ Instance Name : oaamdb2 ■ Port : 1521 Deselect this data source. Select the next data source, OWSM MDS Schema, and enter the following information: ■ Data Source : OWSM MDS Schema ■ Service Name : oaam.mycompany.com ■ User Name : OAAM_MDS assuming OAAM was used as the RCU prefix ■ Password : Password for the OAAM_MDS account. In the top right box, click Add to add an Oracle RAC host. Enter the following information: ■ Host Name : INFRADBHOST1 ■ Instance Name : oaamdb1 ■ Port : 1521 Click Add again to add the second database host and enter the following information: ■ Host Name : INFRADBHOST2 ■ Instance Name : oaamdb2 ■ Port : 1521 Deselect this data source. Click Next. 12. In the Test Component Schema screen, the configuration wizard attempts to validate the data source. If the data source validation succeeds, click Next. If it fails, click Previous, correct the issue, and try again. 13. In the Select Optional Configuration screen, select: ■ Administration Server ■ Managed Server Clusters and Machines 8-220 Oracle Fusion Middleware High Availability Guide Click Next. 14. In the Customize Server and Cluster Configuration screen, select Yes, and click Next . 15. In the Configure the Administration Server screen, enter the following values: ■ Name : AdminServer ■ Listen Address : Enter the virtual host name of the Administration Server, for example: OAAMHOST1.mycompany.com ■ Listen Port : 7001 ■ SSL listen port : Not applicable ■ SSL enabled : leave unchecked Click Next. 16. On the Configure Managed Servers screen, create two entries for each OAAMHOST in the topology, that is, one for the OAAM Server and one for the OAAM Admin Server. Select the OAAM_SERVER entry and change the entry to the following values: ■ Name : WLS_OAAM1 ■ Listen Address : OAAMHOST1.mycompany.com ■ Listen Port : 14300 ■ SSL Listen Port : 14301 ■ SSL Enabled : Selected For the second OAAM_SERVER, click Add and supply the following information: ■ Name : WLS_OAAM2 ■ Listen Address : OAAMHOST2.mycompany.com ■ Listen Port : 14300 ■ SSL Listen Port : 14301 ■ SSL Enabled : Selected Select the OAAM_ADMIN_SERVER entry and change the entry to the following values: ■ Name : WLS_OAAM_ADMIN1 ■ Listen Address : OAAMHOST1.mycompany.com ■ Listen Port : 14200 ■ SSL Listen Port : 14201 ■ SSL Enabled : Selected For the second OAAM_ADMIN_SERVER, click Add and supply the following information: ■ Name : WLS_OAAM_ADMIN2 ■ Listen Address : OAAMHOST2.mycompany.com ■ Listen Port : 14200 ■ SSL Listen Port : 14201 Configuring High Availability for Identity Management Components 8-221 ■ SSL Enabled : Selected Leave all other fields at the default settings. Click Next. 17. In the Configure Clusters screen, create a cluster by clicking Add. Enter name: OAAM_Cluster Create a second cluster by clicking Add. Enter name: OAAM_Admin_Cluster Leave all other fields at the default settings. Click Next. 18. On the Assign Servers to Clusters screen, associate the managed servers with the cluster, as follows: ■ Click the cluster name OAAM_Cluster in the right window. ■ Click the managed server WLS_OAAM1, then click the arrow to assign it to the cluster. ■ Repeat for managed server WLS_OAAM2. Then: ■ Click the cluster name OAAM_Admin_Cluster in the right window. ■ Click the managed server WLS_OAAM_ADMIN1, then click the arrow to assign it to the cluster. ■ Repeat for managed server WLS_OAAM_ADMIN2. Click Next. 19. On the Configure Machines screen, create a machine for each host in the topology. Click the UNIX tab if your hosts use a UNIX-based operating system. Otherwise, click the Machines tab. Supply the following information: ■ Name : Name of the host. The best practice is to use the DNS name OAAMHOST1 ■ Node Manager Listen Address : The DNS name of the machine OAAMHOST1.mycompany.com ■ Node Manager Port : A port for Node Manager to use. Click Next. 20. In the Assign Servers to Machines screen, indicate which managed servers will run on the machines just created. For OAAMHOST1: ■ Click the machine OAAMHOST1 in the right window. ■ Click the managed server WLS_OAAM1 in the left window. ■ Click the arrow to assign the managed server to the host OAAMHOST1. ■ Click the managed server WLS_OAAM_ADMIN1 in the left window. ■ Click the arrow to assign the managed server to the host OAAMHOST1. For OAAMHOST2: ■ Click the machine OAAMHOST2 in the right window. 8-222 Oracle Fusion Middleware High Availability Guide ■ Click the managed server WLS_OAAM2 in the left window. ■ Click the arrow to assign the managed server to the host OAAMHOST2. ■ Click the managed server WLS_OAAM_ADMIN2 in the left window. ■ Click the arrow to assign the managed server to the host OAAMHOST2. Click Next.

21. On the Configuration Summary screen, click Create to begin the creation process.