Figure 4.8. Schema on performance assessment procedure Range of assessment performance value was set into several categories
performance, consists of :
A. Very good, if the total weighted value is more than 80 and less and
equal 100 and fulfilling the criterion and indicator on precondition and principal indicators category;
B. Good, if the total weighted value is more than 60 and less and equal 80
and fulfilling the criterion and indicator available on precondition and principal indicators category;
C. Adequate, if the total weighted value is more than 40 and less and
equal 60 and fulfilling the criterion and indicator available on precondition indicators category;
D. Bad, if the total weighted value is more than 20 and less and equal 40
and fulfilling the criterion and indicator on precondition indicators category;
E. Worse, if the total weighted value less and equal 20 or not fulfilling
one of the criterion and indicator on precondition indicators category. The system has been developed an automatically assessment based on
procedure described in Figure 4.8. The rules of performance assessment on developed DSS can be illustrated on Figure 4.9.
Figure 4.9. Rules of performance assessment
The rule of performance assessment was set based on criteria, indicators and parameters established on P.172004. The assessment begun when the
potential users Sub Director of Forest Product Manufacture, Sub Director of Production, and Sub Director of Marketing and Industry Assessment use and
input their assessment through the system. When industry assessed can not complete one of precondition indicators, then the system will automatically
defines the industry performance on worst category. In the contrary, the system will directly calculating the weighted value on precondition, principal, and
contribute indicators based on preferred parameters. The total weighted value then used to define the industry performance category refer to the classification range
of value.
4.2.4. Software and Hardware Requirements
