Notice Introduction To Smooth Manifolds & User's Guide Manuals
ES-QC-35Manifolds
For Residential and Commercial Applications
Job Name –––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Approval
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––
Representative ––––––––––––––––––––––––––––––––––––––––
LEAD FREE*
Series 35
Quick-Connect
Manifolds
–––––––––––––––––––––––––––––––––––––––––––––
3589
3583
Watts Quick-Connect Manifolds are designed and manufactured for many years of trouble free service. Produced of off
white Polysulfone, a high performance thermal plastic material,
the Watts Quick-Connect design allows for quick and easy
connections without the use of installation tools.
Specifications
3590
Connection shall be made using Watts Series 35
Quick-Connect fitting with Integral Collet and O-Ring guide.
Fitting shall be able to fully rotate under pressure and allow for
easy disconnect and re-use without the use of disconnection
tools. Fitting must not disassemble to disconnect.
Approvals
NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, ASSE 1061
3585
Ratings
100psi @ 180°F (6.8 bar @ 82°C)
250psi @ 75°F (17.3 bar @ 24°C)
Example
3589-1810
35 = Series 35
89 = Type 89 Single Union Body
1810 = 1"CTS x 1⁄2"CTS
*The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.
Caution: The polysulfone material used in the Quick-Connect fittings can
be compromised by exposure to volatile organic compounds (VOC’s) and
caustic chemicals. Therefore, DO NOT expose this product to any such
chemical or foreign substance, which would include exposure to the following products: Pipe Dopes (thread sealants), bug sprays, lubricants,
cleaners, paints, bleaches, acids, solder fluxes, plastic piping primers and
cements, oxidizing agents, alkaline solutions, thinners, fuels, oil based
caulks, hydrocarbons, spray foam of foaming agents (insulation).
It is also recommended that all threaded connections be made with Teflon®
tape only.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
3584
Assembly Elements
35 Series Quick-Connect Manifold
Single Side Style
Single
Stem
Body
Label
Plates
Single Side
Mounting
Kit
Single Manifold
(Assembled)
Single
Union
Body
Divider
Plug
Dual Side Style
Label
Plates
Dual Union
Body
Divider
Plug
Dual Manifold
(Assembled)
Dual Stem
Body
Return End
Dual Side
Mounting
Kit
Installation Dimensions
35 Series Quick-Connect Manifold
1⁄4"
881/4
133/4
⁄4"
1" CTS Watts Quick-Connect Inlets.
See Product Catalog for Transition
1" CTS SEA TE
Fittings
QUICK CONN
SEE PRODUC
FOR TRANSIT
1⁄21/2"
CTS SE
" CTS
Quick-Connect
QUICK CON
ColorCODED
Coded
COLOR
(RED(RED
= HOT,
PLATES
=
22 11/4
⁄4"
Outlets
Label Plates
BLUE = COLD)
Recommended Mounting
Screw #10 Panhead (4) Places
DIMENSION
A
Dimension
A
RECOMMENDED MOUNTIN
SCREW #10 PANHEAD (4) PLACES
5⁄8"
445/8
1⁄4
PORTS
DIMENSION A
4
6
8
10
12
14
16
18
20
22
24
26
28
30
30+
4"
61⁄4"
81⁄2"
103⁄4"
13"
151⁄4"
171⁄2"
193⁄4"
22"
241⁄4"
261⁄2"
283⁄4"
31"
331⁄4"
Add 21⁄4" for
Each (2)
Additional Port
1/4 Turn
TURN On/Off Valve
With Integral Handle
233/8
⁄8"
1111/4
⁄4"
Weights – Weights are approximate
Manifolds - Single
Manifolds - Dual (cont’d)
Type 89 Manifolds - Single Union Body
MODEL
SIZE & CONNECTION
Package Type: Bulk
3589-1810
1" CTS x 1⁄2" CTS
Package Type: Poly Bag
3589B-1810
1" CTS x 1⁄2" CTS
Type 80 Manifold Dual Side Mounting Kits
ITEM WEIGHT
lbs.
kg.
3.4
1.5
3.4
1.5
MODEL
SIZE & CONNECTION
Package Type: Bulk
3580-18
For 35 Series
Package Type: Poly Bag
3580B-18
For 35 Series
ITEM WEIGHT
lbs.
kg.
1.5
.69
1.5
.69
3580
3589
Type 90 Manifolds - Single Stem Body Right
MODEL
SIZE & CONNECTION
Package Type: Bulk
3590-1810
1" CTS x 1⁄2" CTS
Package Type: Poly Bag
3590B-1810
1" CTS x 1⁄2" CTS
Type 82 Manifold Divider Plugs
MODEL
ITEM WEIGHT
lbs.
kg.
3
1.4
3
1.4
SIZE & CONNECTION
Package Type: Bulk
3582-18
For 35 Series
Package Type: Poly Bag
3582B-18
For 35 Series
ITEM WEIGHT
lbs.
kg.
0.3
.14
0.3
.14
3590
3582
Type 85 Manifold Return Ends
Type 91 Manifolds - Single Stem Body - Left
MODEL
SIZE & CONNECTION
Package Type: Bulk
3591-1810
1" CTS x 1⁄2" CTS
Package Type: Poly Bag
3591B-1810
1" CTS x 1⁄2" CTS
MODEL
ITEM WEIGHT
lbs.
kg.
3
1.4
3
1.4
Package Type: Bulk
3585-18
1" CTS
Package Type: Poly Bag
3585B-18
1" CTS
3591
SIZE & CONNECTION
Package Type: Bulk
3581-18
For 35 Series
Package Type: Poly Bag
3581B-18
For 35 Series
ITEM WEIGHT
lbs.
kg.
1.1
.5
1.1
.5
Package Type: Bulk
3583-1810
1" CTS x 1⁄2" CTS
Package Type: Poly Bag
3583B-1810
1" CTS x 1⁄2" CTS
3.1
SIZE & CONNECTION
Package Type: Bulk
3584-1810
1" CTS x 1⁄2" CTS
Package Type: Poly Bag
3584B-1810
1" CTS x 1⁄2" CTS
3.1
2.7
6
2.7
SIZE & CONNECTION
SIZE & CONNECTION
MODEL
SIZE & CONNECTION
4Package Type: Bulk
1⁄2" Spool
3588-10
Package Type: Poly Bag
1⁄2" Spool
3588B-10
ITEM WEIGHT
lbs.
kg.
6
ITEM WEIGHT
lbs.
kg.
ES-QC-35Manifolds 0933
.09
.09
3586
ITEM WEIGHT
lbs.
kg.
.09
.09
3587
ITEM WEIGHT
lbs.
kg.
0.7
.32
0.7
.32
3588
Type 80-MT Manifold Tool
3584
MODEL
SIZE & CONNECTION
ITEM WEIGHT
lbs.
kg.
4Package Type: Poly Bag
3580-MT
Easy Removal of Outlets .12
A Watts Water Technologies Company
3585
Type 88 Manifold Valve Repair Kits
3583
Type 84 Manifolds - Dual Stem Body
MODEL
1.0
Package Type: Bulk
3587-Blue
Blue - For 35 and Metric 0.2
Package Type: Poly Bag
3587B-Blue
Blue - For 35 and Metric 0.2
ITEM WEIGHT
lbs.
kg.
6.8
2.3
Type 87 Manifold Label Plates
MODEL
6.8
1.0
3581
Type 83 Manifolds - Dual Union Body
SIZE & CONNECTION
2.3
Package Type: Bulk
3586-Red
Red - For 35 and Metric 0.2
Package Type: Poly Bag
3586B-Red
Red - For 35 and Metric 0.2
Manifolds - Dual
MODEL
ITEM WEIGHT
lbs.
kg.
Type 86 Manifold Label Plates
MODEL
Type 81 - Manifold Single Side Mounting Kits
MODEL
SIZE & CONNECTION
.05
3580-MT
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
© 2009 Watts
For Residential and Commercial Applications
Job Name –––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Approval
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––
Representative ––––––––––––––––––––––––––––––––––––––––
LEAD FREE*
Series 35
Quick-Connect
Manifolds
–––––––––––––––––––––––––––––––––––––––––––––
3589
3583
Watts Quick-Connect Manifolds are designed and manufactured for many years of trouble free service. Produced of off
white Polysulfone, a high performance thermal plastic material,
the Watts Quick-Connect design allows for quick and easy
connections without the use of installation tools.
Specifications
3590
Connection shall be made using Watts Series 35
Quick-Connect fitting with Integral Collet and O-Ring guide.
Fitting shall be able to fully rotate under pressure and allow for
easy disconnect and re-use without the use of disconnection
tools. Fitting must not disassemble to disconnect.
Approvals
NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, ASSE 1061
3585
Ratings
100psi @ 180°F (6.8 bar @ 82°C)
250psi @ 75°F (17.3 bar @ 24°C)
Example
3589-1810
35 = Series 35
89 = Type 89 Single Union Body
1810 = 1"CTS x 1⁄2"CTS
*The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.
Caution: The polysulfone material used in the Quick-Connect fittings can
be compromised by exposure to volatile organic compounds (VOC’s) and
caustic chemicals. Therefore, DO NOT expose this product to any such
chemical or foreign substance, which would include exposure to the following products: Pipe Dopes (thread sealants), bug sprays, lubricants,
cleaners, paints, bleaches, acids, solder fluxes, plastic piping primers and
cements, oxidizing agents, alkaline solutions, thinners, fuels, oil based
caulks, hydrocarbons, spray foam of foaming agents (insulation).
It is also recommended that all threaded connections be made with Teflon®
tape only.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
3584
Assembly Elements
35 Series Quick-Connect Manifold
Single Side Style
Single
Stem
Body
Label
Plates
Single Side
Mounting
Kit
Single Manifold
(Assembled)
Single
Union
Body
Divider
Plug
Dual Side Style
Label
Plates
Dual Union
Body
Divider
Plug
Dual Manifold
(Assembled)
Dual Stem
Body
Return End
Dual Side
Mounting
Kit
Installation Dimensions
35 Series Quick-Connect Manifold
1⁄4"
881/4
133/4
⁄4"
1" CTS Watts Quick-Connect Inlets.
See Product Catalog for Transition
1" CTS SEA TE
Fittings
QUICK CONN
SEE PRODUC
FOR TRANSIT
1⁄21/2"
CTS SE
" CTS
Quick-Connect
QUICK CON
ColorCODED
Coded
COLOR
(RED(RED
= HOT,
PLATES
=
22 11/4
⁄4"
Outlets
Label Plates
BLUE = COLD)
Recommended Mounting
Screw #10 Panhead (4) Places
DIMENSION
A
Dimension
A
RECOMMENDED MOUNTIN
SCREW #10 PANHEAD (4) PLACES
5⁄8"
445/8
1⁄4
PORTS
DIMENSION A
4
6
8
10
12
14
16
18
20
22
24
26
28
30
30+
4"
61⁄4"
81⁄2"
103⁄4"
13"
151⁄4"
171⁄2"
193⁄4"
22"
241⁄4"
261⁄2"
283⁄4"
31"
331⁄4"
Add 21⁄4" for
Each (2)
Additional Port
1/4 Turn
TURN On/Off Valve
With Integral Handle
233/8
⁄8"
1111/4
⁄4"
Weights – Weights are approximate
Manifolds - Single
Manifolds - Dual (cont’d)
Type 89 Manifolds - Single Union Body
MODEL
SIZE & CONNECTION
Package Type: Bulk
3589-1810
1" CTS x 1⁄2" CTS
Package Type: Poly Bag
3589B-1810
1" CTS x 1⁄2" CTS
Type 80 Manifold Dual Side Mounting Kits
ITEM WEIGHT
lbs.
kg.
3.4
1.5
3.4
1.5
MODEL
SIZE & CONNECTION
Package Type: Bulk
3580-18
For 35 Series
Package Type: Poly Bag
3580B-18
For 35 Series
ITEM WEIGHT
lbs.
kg.
1.5
.69
1.5
.69
3580
3589
Type 90 Manifolds - Single Stem Body Right
MODEL
SIZE & CONNECTION
Package Type: Bulk
3590-1810
1" CTS x 1⁄2" CTS
Package Type: Poly Bag
3590B-1810
1" CTS x 1⁄2" CTS
Type 82 Manifold Divider Plugs
MODEL
ITEM WEIGHT
lbs.
kg.
3
1.4
3
1.4
SIZE & CONNECTION
Package Type: Bulk
3582-18
For 35 Series
Package Type: Poly Bag
3582B-18
For 35 Series
ITEM WEIGHT
lbs.
kg.
0.3
.14
0.3
.14
3590
3582
Type 85 Manifold Return Ends
Type 91 Manifolds - Single Stem Body - Left
MODEL
SIZE & CONNECTION
Package Type: Bulk
3591-1810
1" CTS x 1⁄2" CTS
Package Type: Poly Bag
3591B-1810
1" CTS x 1⁄2" CTS
MODEL
ITEM WEIGHT
lbs.
kg.
3
1.4
3
1.4
Package Type: Bulk
3585-18
1" CTS
Package Type: Poly Bag
3585B-18
1" CTS
3591
SIZE & CONNECTION
Package Type: Bulk
3581-18
For 35 Series
Package Type: Poly Bag
3581B-18
For 35 Series
ITEM WEIGHT
lbs.
kg.
1.1
.5
1.1
.5
Package Type: Bulk
3583-1810
1" CTS x 1⁄2" CTS
Package Type: Poly Bag
3583B-1810
1" CTS x 1⁄2" CTS
3.1
SIZE & CONNECTION
Package Type: Bulk
3584-1810
1" CTS x 1⁄2" CTS
Package Type: Poly Bag
3584B-1810
1" CTS x 1⁄2" CTS
3.1
2.7
6
2.7
SIZE & CONNECTION
SIZE & CONNECTION
MODEL
SIZE & CONNECTION
4Package Type: Bulk
1⁄2" Spool
3588-10
Package Type: Poly Bag
1⁄2" Spool
3588B-10
ITEM WEIGHT
lbs.
kg.
6
ITEM WEIGHT
lbs.
kg.
ES-QC-35Manifolds 0933
.09
.09
3586
ITEM WEIGHT
lbs.
kg.
.09
.09
3587
ITEM WEIGHT
lbs.
kg.
0.7
.32
0.7
.32
3588
Type 80-MT Manifold Tool
3584
MODEL
SIZE & CONNECTION
ITEM WEIGHT
lbs.
kg.
4Package Type: Poly Bag
3580-MT
Easy Removal of Outlets .12
A Watts Water Technologies Company
3585
Type 88 Manifold Valve Repair Kits
3583
Type 84 Manifolds - Dual Stem Body
MODEL
1.0
Package Type: Bulk
3587-Blue
Blue - For 35 and Metric 0.2
Package Type: Poly Bag
3587B-Blue
Blue - For 35 and Metric 0.2
ITEM WEIGHT
lbs.
kg.
6.8
2.3
Type 87 Manifold Label Plates
MODEL
6.8
1.0
3581
Type 83 Manifolds - Dual Union Body
SIZE & CONNECTION
2.3
Package Type: Bulk
3586-Red
Red - For 35 and Metric 0.2
Package Type: Poly Bag
3586B-Red
Red - For 35 and Metric 0.2
Manifolds - Dual
MODEL
ITEM WEIGHT
lbs.
kg.
Type 86 Manifold Label Plates
MODEL
Type 81 - Manifold Single Side Mounting Kits
MODEL
SIZE & CONNECTION
.05
3580-MT
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
© 2009 Watts