Analysis of Effect of Body Mass Index (BMI) and Surface Area of the Heel on Female Prospective Employee during Walking.
PROCEEDINGS
1st International Conference on Engineering of Tarumanagara
(ICET 2013)
“Urban Engineering for Future Generation”
Jakarta, 2-3 October 2013
ISBN: 978-979-99723-9-2
FACULTY OF ENGINEERING
TARUMANAGARA UNIVERSITY
JAKARTA-INDONESIA
2013
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Forewords
Chairman of the Organizing Committee
First of all let’s pray and say thanks to God for giving us His mercy and blessings.
The development of technology nowadays is growing up so fast. It aims to meet the
necessary of the community to get a better life. Technological innovation which needed to
develop technology products that can help people in improving their lives. Therefore the
academics are not only required to implement the learning process, but also have to do
research and community service to produce innovative scientific research.
Indonesian academics today are eager to involve in research activities. Therefore we
required a scientific forum for mutual discussion, exchange information about the research
that has been carried out especially related to Urban Engineering.
Faculty of Engineering, University of Tarumanagara conducts the first international
conference to bring the academics, researchers to develop their knowledge and exchange
ideas so that the researchers can improve the results of research that has been done. The
conference called the International Conference on Engineering Tarumanagara, 2013, which
is held on the Auditorium at the 8th floor of M Building, Campus I, University of
Tarumanagara from 2 to 3 October 2013. The ICET 2013 conference theme is Urban
Engineering for Future Generations. Future generations as the frontier of national
development should be prepared from now on, along with the necessary infrastructure. The
role of technology is to support the enhancement of the ability of future generations. This
event includes to the presentation of scientific papers by keynote speakers, parallel
sessions presenting papers of academics and research poster exhibition.
The more extensive the information obtained, the more knowledge that we gained. Some
papers submitted by researchers and academics from different countries such as United
Kingdom, Germany, Taiwan, Singapore, Iran, Malaysia, Sri Lanka, and Japan, will enrich
the science and technological development.
This conference proceedings contain the full text of all papers presented International
Conference on Engineering of Tarumanagara 2013. Papers are categorized based on
Engineering disciplines set by the organizing committee. Then, the presentation is divided
into parallel sessions.
On this occasion I would like to thank to: Foundation of Tarumanagara, Rector of
Tarumanagara University, Dean of Faculty of Engineering Tarumanagara University and
Sponsors of ICET 2013, for the support and help that has been given. I also would like to
thank the authors for their contributions.
Finally I would like to apologies if there are deficiencies in the activity.
Thank you for all the attention.
Dr. M. Sobron Yamin Lubis
Chairman of the Organizing Committee
i
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Forewords
Dean of Faculty of Engineering
I would like to warmly welcome all participants of the International Conference on
Engineering of Tarumanagara (ICET 2013). This conference is organized by Faculty of
Engineering, Tarumanagara University. The main aim of this conference was to respond
the problem related to urban engineering for future generation. As this conference was
designed to gather scientists, engineers, practitioners, and industries in engineering related
disciplines, I expect intense discussion will happen among them so that some brilliant ideas
to be used to improve the quality of human life can be produced.
I hope this conference will create an international networking and collaborating, especially
in engineering research and publication.
I would like to congratulate the organizing committee of ICET 2013, for their outstanding
efforts. I would also like to express my gratitude to the sponsors for their contributions in
making this conference a resounding success.
I wish the International Conference on Engineering of Tarumanagara (ICET 2013) a very
useful and fruitful occasion.
Thank you for your attention and contribution.
Dr. Agustinus Purna Irawan
Dean of Faculty of Engineering
ii
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Forewords
Rector of Tarumanagara University
Distinguished Guests, Ladies and Gentlemen,
I am delighted to have the opportunity to give a welcoming speech on this International
conference where the issues of Urban Engineering for Future Generation will be addressed.
And I believe these issues are crucial and important not only for our future generation but
also for our planet where we live.
The progressive development in technology particularly in the 21-st century has brought
the impact to human life. The way we communicate and the way we live have changed
along with the development of the technology. In order to cater these needs, the natural
resources are explored, buildings and industries have been built. As results of this
development, the echo system is affected. In one hand, we have been successful to build
our planet to cater our needs and on the other hands, gradually the stability our planet has
been ruined. The question is; who is responsible or who is to be blamed on this ordeal.
Despite all problems we might encounter as we go with this life, we have to protect our
only planet.
In order to find the solution to these problems, many conferences and seminars have been
conducted on the issues of Urban and Sustainability. Most of the time, people conceive of
the programs in the last 10-15 years and anticipate for the future. Since the Kyoto Protocol
in 1997 in Tokyo until the World Sustainable Building Conferences (SB11) in Helsinki in
2011, thousands of papers have been published. Many aspects of the future of the world for
our future generation have been discussed. Many rating systems have been developed and
yet many issues still need the attention of the scientists.
In broad, the issues can be categorized in three aspects i.e., social aspects, ecological
aspects and, environmental aspects. The deterioration of these aspects can be minimized
from the technical dimension. However, there is one aspect that is less discussed and
considered i.e., cultural aspect. The culture and the way of life in each country might be
different. For instance, those who live in the sub-tropical countries might be different from
those in the tropical countries. Eventhough they are interrelated, but each of them has to be
explored.
Today, we meet in this conference to exchange the knowledge and the information in many
aspects of the sustainability and technology. I hope in this conference, the participants not
only can share but also can learn on the sustainable issues.
Thank you.
Prof. Ir. Roesdiman Soegiarso, M.Sc., Ph.D.
Rector of Tarumanagara University
iii
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Scientific Committee
Dr. Leksmono S. Putranto
Prof. Satoyuki Kawano
Prof. Robert Vale
Prof. Brenda Vale
Prof. Mohd. Zulkifly b. Abdullah
Dr. Ing. Joewono Prasetijo
Dr. Thomas
Dr. Ing. A. Rugerri Toni L.
Dr. Bambang K. Hadi
Prof. Indarto
Prof. Tresna P. Soemardi
Prof. I Made Kartika
Prof. Danardono A. S.
Prof. Eddy S. Siradj.
Dr. Yono Reksoprodjo
Prof. Tjokorda Gde T.N.
Prof. Kuncoro Diharjo
Prof. Hadi Sutanto
Dr. Rianti Ariobimo
Prof. Roesdiman Soegiarso
Prof. Chaidir A. Makarim
Prof. Tri Harso Karyono
Dr. Agustinus Purna Irawan
Dr. Adianto
Dr. Harto Tanujaya
Dr. Lamto Widodo
Dr. Jo Santoso
Dr. Agustinus Sutanto
Dr. Danang Priatmodjo
Dr. Naniek Widayati
Dr. Wati A. Pranoto
Dr. Najid
Tarumanagara University (Chair)
Osaka University
Victoria University of Wellington
Victoria University of Wellington
Universiti Sains Malaysia
Universiti Tun Hussein Onn
Tarumanagara University, and
National University of Singapore
Atma Jaya Catholic University of Indonesia, and
Karlsruhe Institut fur Technologie
Bandung Institute of Technology
University of Gadjah Mada
University of Indonesia
University of Indonesia
University of Indonesia
University of Indonesia
University of Indonesia
Udayana University
Sebelas Maret University
Atma Jaya Catholic University of Indonesia
Trisakti University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Organizing Committee
Chairman
Vice Chairman
Conference Secretariat
Dr. M. Sobron Yamin Lubis
Priyendiswara A.B., M.Com
Dr. Harto Tanujaya
Regina Suryadjaja, M.T.
Mekarsari, M.Sc.
Dewi Linggasari, M.T.
iv
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Table of Content
Forewords: Chairman of the Organizing Committee
Forewords: Dean of Faculty of Engineering
Forewords: Rector of Tarumanagara University
Scientific Committee
Organizing Committee
Table of Content
Invited Papers
CFD modeling on Capillary Flow of Wave Soldering
M.S. Abdul Aziz, M.Z. Abdullah, C.Y. Khor, F. Che Ani
i
ii
iii
iv
v
vi
1-8
List of Papers
Paper ID
AE-01
AE-02
AE-04
AE-06
AE-07
AE-08
AE-09
AE-12
AE-13
AE-14
AE-15
CE-03
Title
Author/Authors
Exploring What Influences Motorcycle Use for Daily Travel with Theory of
Planned Behavior
Siti Fatimah, B. Kombaitan, Gatot Yudoko, Tubagus Furqon
Existential Expression Of Extension Building In Children Library By Tadao
Ando Is Spirit Of Age
Rudy Trisno, Antariksa, Sudikno, Purnama Salura
Virtual Gamer Space as the Possible Future City Shaper
Andi Surya Kurnia
Typology of Residential Architecture by Activity Microeconomics
Etty R. Kridarso
The Development Of Chinese Community (Pecinan) In Surakarta Cities,
Central Java, Indonesia
Nafi’ah Solikhah
Fence Compromise Interests Of An Individual And The City
Franky Liauw
An Idea Planning Of The Urban Water-Based Development In The
Indonesia's Cities Case Study: Tanjung Priok, The North Of Jakarta,
Indonesia
Mekar Sari Suteja
The Role Of Building Pathology To Realize Eco-Housing
James Rilatupa
The Time Limit Parameters In Feasibility Study of Using Solar Panel For
Household Energy Consumption In Jakarta
Melissa Kania
Sustainable Housing Development Along The River Bank Ciliwung River’s
Case: Problem As Solution
Darrundono
Water-Filled Window” Construction To Protect Sunlight Heat Propagation
Into The Room
Fermanto Lianto
Students Perceptions On Trans Jakarta Services
Leksmono Suryo Putranto, Herry Hartanto
pp
1-8
1-7
1-7
1-12
1-9
1-8
1-7
1-9
1-8
1-4
1-16
1-7
v
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Paper ID
CE-06
CE-07
CE-09
CE-11
CE-14
CE-16
CE-18
CE-19
CE-20
CE-21
EE-01
EE-02
EE-03
EE-04
EE-06
EE-08
IE-02
Title
Author/Authors
Understanding Travel Behavior In Motorcycle City From Household
Activity Time Allocation
Okto Risdianto Manullang
Threat Of Environmental Degradation Due To The Exploitation Of Shale
Gas Besides Great Potential Shale Gas In Indonesia
Sofyan Ramadhan, Hanif Indra Wicaksana
Soil Characterization Of Index Properties At Telecommunication Network
Site In East Java, Indonesia
Marelianda Al Dianty, Ahmad Shukri Yahaya, Fauziah Ahmad
Comparison Of Road User Cost Loss Due To Work Zone With The Delay
Completion Road Maintenance Project
Dewa Ketut Sudarsana, Harnen Sulistio, Achmad Wicaksono, Ludfi Djakfar
The Availability Of Shale As A Potential Of Mass Movement For
Identifying The Consideration And Evaluation In A Construction, Case
Study: Bukit Agung Regency, Gunungpati, Semarang
Widiastuti Nur Farida, Ghufran Helmi Aziz, F.X. Anjar Trilaksono
To Increase The Damping On Passive Control Device By Using Asphalt
Material
Daniel Christianto, Yuskar Lase
Implementation Of Viscosity Measurement On Plastic And Viscous Liquid
State For Mudflow Case
Budijanto Widjaja, Shannon Hsien-Heng Lee
A High Dynamic Mobile Knowledge Worker: Preliminary Insight To The
Impact Of The Smartphone On Travel Behavior.
Gloriani Novita C., Ofyar Z. Tamin, Idwan Santoso, Miming Miharja
The Influence of Aspect Ratio of Local Fibers on Flexural Properties of
Reactive Powder Concrete
Widodo Kushartomo, Supartono, Cindy Angela
Funding And Financing Regional Road Maintenance In Indonesia
Tiopan Henry M Gultom, Ofyar Z Tamin, Pradono, Ade Sjafruddin
Performance Evaluation Of Zigbee Protocol Using Simulation Model
Lydia Sari, Theresia Ghozali
The role of the Indonesian universities in New & Renewable Energy
Rohani Jahja Widodo
Comparative Analysis Method For Enhancing The Quality Image Grayscale
Bayesian Method Of Least Square Method Gaussian Scale Mixtures And
Wiener
Nanniek Andiyani, Ainil Syafitri, Bekti Yulianti, Yohannes Dewanto
Home Security Integrated System By Using A Short Message (SMS) On
Mobile Phones Using Microcontroller Atmega 8535
Tobias, Bambang Widodo, Yohannes Dewanto
Telemetry System Design On Payload Using Flymaple with ARM CortexM3
Izzah F. Akmaliah, Imam S Nugroho, Andriani
Four Kinds of Testing in Mobile Application "Diabetes Risk Application
(DBRA)"
Anindito Yoga Pratama, Dewi Agushinta R., Remi Senjaya
Analysis Of Effect Of Body Mass Index (BMI) And Surface Area Of The
Heel On Female Prospective Employee During Walking
Andrijanto, Ririn Nalurita
pp
1-9
1-7
1-6
1-8
1-8
1-8
1-7
1-9
1-7
1-11
1-6
1-8
1-8
1-7
1-6
1-9
1-7
vi
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Paper ID
IE-04
IE-05
IE-06
IE-07
IE-08
IE-10
IE-11
IE-12
IE-13
IE-14
IE-15
IE-16
IE-17
IE-19
IE-21
IE-22
Title
Author/Authors
Distance Estimation Within Peri-Personal Space In Real And Virtual
Environment
Dino Caesaron, Chiuhsiang Joe Lin
Silver Meal And Part Period Algorithm In Producing Minimum Lot Sizing
Cost
Hendy Tannady
Imovation: Innovative, Safe, And Ergonomically Suitable Tool For Active
Elderly People To Climb Stairs.
Ardian Dominggo W., Vicario Reinaldo, I Gusti Agung Gede S., Fajar
Wisma P.
Decision Support Tool For Job Shop Scheduling With Job Cancellation
Muchamad Oktaviandri, Adnan Hassan, Awaluddin Mohd. Shaharoun
Analysis of Application Low Cost Automachine on Product Type Switch
A8L on PT. Omron Manufacturing of Indonesia
Silvi Ariyanti, Ruly
Urban Engineering: Urban Search And Rescue (USAR) Within Emergency
Response Systems In Confined Space Rescue Using Serpentine Robot
Khristian Edi Nugroho Soebandrija, Sofyan, Andre M.R. Wajong, Meilani
Airport Of The Future, Green Airport And Aerotropolis: Industrial
Engineering And Architecture Engineering Perspective
Khristian Edi Nugroho Soebandrija
Industrial Engineering And The Perspectives On Leadership, Performance,
Innovation, Competitive Advantage And Sustainable Competitive
Advantage
Khristian Edi Nugroho Soebandrija
Framework Design for Standard Operating Procedures (SOP)
Implementation of Cultivation And Post-Harvest In Cluster Biopharmaca
Karanganyar.
Novita Hadiningrum, Retno Wulan Damayanti, Fakhrina Fahma
Time Study At Packing Cable Work Station, Case Study At PT. X
I Wayan Sukania, Handika
Designing Questionnaire for Empirical Study on Relationship Between
TQM, TPM, and KM
Wilson Kosasih
Model Development of Shifting Bottleneck Heuristic to Solve Job Shop
Scheduling Problem With Parallel Machines
Johan Oscar Ong, Imam Maulana
Transformer Oil Insulation Analysis Based On Breakdown Voltage Testing
At PT. PLN (PERSERO) Service And Production Semarang
Mohammad Agung Saryatmo
Using Augmented Reality to Enhance Art Exhibition at Binus International
Raymond Bahana, Bayu Prakoso Dirgantoro
Ergonomics Analysis The Porters Complaints Against The Occurrence Of
Musculoskeletal Disorders (MSDs) Using The Niosh Lifting Equation And
PEI
Boy Nurtjahyo M., Erlinda Muslim, Krisna Anga Ramadha, Debrina
Puspitarini
Recommendation Of Unloading Process Equipment In Raw Material Store
Of Fast Moving Consumer Goods Plant With Virtual Human Modeling
Methodology
Erlinda Muslim, Boy Nurtjahyo M., Herman Adrian, Viky Muruatut
pp
1-5
1-4
1-7
1-8
1-12
1-6
1-7
1-7
1-8
1-6
1-5
1-6
1-10
1-5
1-8
1-8
vii
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Paper ID
IE-23
IE-24
ME-01
ME-07
ME-10
ME-11
ME-12
ME-13
ME-16
ME-17
ME-18
ME-19
ME-20
ME-22
ME-24
ME-26
ME-27
ME-29
Title
Author/Authors
Designing Ergonomic Packaging Line Workstation With Simulation Methods
Maya Arlini Puspasari, Erlinda Muslim, Feronika, Atiqah Zulfa Nadia
Line Assembly Analysis For R-223 Product By Kilbridge-Wester Heuristic
Method, Helgeson-Birnie Method And Moodie Young Method At PT. Mulia
Knitting Factory
Lina Gozali, Silvi Ariyanti, Elizabeth Maria
Elastic Normal Contact Of A Rough Surface With Interaction Between
Asperities Using Elastic Halfspace Theory
Rugerri Toni Liong
Sampling Tools Product Design Process On Pre Heater Process In Cement
Production
Edi Sutoyo, Yohanes Dewanto, Agri Suwandi
Solarcell Design Inverter To Supply The Load At 50 W, 50 Hz
Syahrul Alamsyah, I.A. Daryanto D., Munnik H., Yohannes Dewanto
New And Renewable Energy By Using Magnets To Generate Electricity
Dzulfi S. Prihartanto, Suharlan, Gede Eka Lesmana, Yohannes Dewanto
Model Of Charge Carrier Rocket Launcher On Research Measuring
Pressure, Temperature, And Humidity
Mochammad Ilham Attharik, Ahmad Hidayat Furqon, Pinardi, Eko
The Use Of Ramie Fiber In HDPE Matrix Composite For The Rehabilitation
Of Scoliosis Patients
Lies Banowati, Bambang Kismono Hadi
The Effects An Environment Can Cause On Low Alloy Steel at A Variety of
Temperatures
Erwin Siahaan
Effect Of Different Bend-Twist Coupling Topologies on Induced Twist and
Cost of Wind Turbine Adaptive Blades
Rahul Bagali, Hui Zhang, Alireza Maheri
Updated Cost Modeling Of Hybrid Renewable Energy System Components
Fadi Kahwash, Alireza Maheri
A Genetic Algorithm For Optimal Distribution Of Aerofoils On Wind
Turbine Blades
Fadi Kahwash, Alireza Maheri
Thermal Properties Analysis Of Multy Component Material As Thermal
Energy Storage Material
Suditama, Budhi S.K.
Expert System In Design Automation For Customized Product Development
- Three Degree Of Freedom Vertical CNC Milling Machine
Agus Halim, Didi Widya Utama, Jemmy Septiawan
Effect of Rake Angle in the Turning Process on the Surface Roughness of
Workpiece AISI 4340 Steel
Sobron Lubis, Rosehan, Denny Handoko
Joint Properties Of Friction Stir Welded 6063 t3 Aluminum Alloys With
Variation Of Preheat Method
Yustiasih Purwaningrum, Medilla Kusriyanto, Lulu Supriyanto
Experimental Study Characterization Burner Gas Flame Bioethanol Sago
Residual
I Made Kartika Dhiputra, Numberi Johni Jonatan
Design Concept Of Fifo Pick And Deposit System
Richard Jonathan Salli, Agustinus Purna Irawan, Danardono A.S.
pp
1-7
1-11
1-8
1-7
1-6
1-6
1-6
1-5
1-10
1-7
1-7
1-7
1-9
1-8
1-9
1-6
1-4
1-7
viii
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Paper ID
ME-30
Title
Author/Authors
Comparison Of Turbulence Models On Reynolds Numbers Of A Proto X-2
Bioenergy Micro Gas Turbine’s Compressor Discharge
Steven Darmawan, Ahmad Indra Siswantara, Budiarso
pp
1-9
ME-31
Polymer Matrix Composite Mechanical Properties Of Two Types Woven
Sofyan Djamil, Sobron Y Lubis, Hartono
1-5
ME-32
Cooling Effect of Capillary Tube in Refrigerator
Harto Tanujaya
Enhancing the Perfomance of Corrugated Panels Under Blast Loading:
Numerical Analysis
Christian Wijaya, Johan Oscar Ong
Energy Efficient Cold Storage As Hybrid Refrigeration Machine Using
Heating Effect From Condenser With Hydrocarbon Refrigerant Substituted
For R-22
Azridjal Aziz, Herisiswanto, Afdhal Kurniawan Mainil
To Promote Jakarta City as one of an excited Tourist Destination in Asia
towards the Asian Economic Community (AEC)
Priyendiswara
Innovative Use Wood And Bamboo Use As Renewable Finishing Materials
In The Building Application
Sylvie Wirawati
Evaluation Of 25 Years Of Development Of The New Towns In
Jabodetabek: Profile
Liong Ju Tjung, Suryono Herlambang, Indah Susilowati, Regina Suryadjaja
The Lineage Of Ict Development: The Case Of Batam Island
Adiwan Aritenang
1-5
ME-33
ME-34
UE-01
UE-02
UE-03
UE-04
1-2
1-8
1-8
1-8
1-10
1-5
Parallel Session Schedule
Day/Date
Time
Wednesday
2 October 2013
13.00-15.00
13.00-15.00
13.00-15.00
13.00-15.00
15.00-15.30
15.30-17.30
15.30-17.30
15.30-17.30
15.30-17.30
Thursday
3 October 2013
Room
No
1
2
3
4
1
2
3
4
09.00-12.00
1
09.00-12.00
2
09.00-12.00
3
09.00-12.00
4
Paper ID
AE-01, AE-06, UE-04, CE-06, CE-19
IE-02, IE-04, IE-05, IE-06, IE-07
IE-19, IE-21, IE-22, IE-23, ME-07
ME-10, ME-11, ME-18, ME-20, ME-27, ME-34
Coffee Break
CE-07, CE-09, CE-11, CE-14, CE-18, CE-21
EE-01, EE-02, EE-03, EE-04, EE-06, EE-08
IE-10, IE-11, IE-12, IE-13, IE-16
ME-12, ME-13, ME-17, ME-19, ME-26, ME-33
AE-02, AE-04, AE-07, AE-08, AE-09, AE-12,
AE-14
AE-13, AE-15, CE-03, CE-16, CE-20
ME-01, ME-16, ME-22, ME-24, ME-29, ME-30,
ME-31, ME-32
IE-08, IE-14, IE-15, IE-17, IE-24, UE-01, UE-02,
UE-03
ix
Internation
nal Conferen
nce on Engineering of Tarumanagaraa (ICET 2013))
F
Faculty of En
ngineering, Tarumanagara University,,
onesia, 2‐3 O
October 2013
3
Jakarta‐Indo
List of Pap
pers
International Confference on Engineerin
E
ng of Tarum
managara (ICET
(
20133)
Pap
per ID
A
AE-01
A
AE-02
A
AE-04
A
AE-05
A
AE-06
A
AE-07
A
AE-08
A
AE-09
A
AE-12
A
AE-13
A
AE-14
A
AE-15
C
CE-03
C
CE-06
C
CE-07
C
CE-09
C
CE-11
Title
Autthor/Authorrs
Expploring Whaat Influencess Motorcyclee Use for Daily Travel with Theoryy of Planned
d
Behhavior
Sitii Fatimah, B.
B Kombaitann, Gatot Yudooko, Tubaguss Furqon
Existential Exppression Of Extension Building
B
In Children
C
Libbrary By Taddao Ando Iss
Spiirit Of Age
Rudy Trisno, Antariksa, Suddikno, Purnaama Salura
Virrtual Gamerss Space as thhe Possible Fuuture City Sh
haper
Andi Surya Kurrnia
Ideentification of
o Characterr Areas Arouund the temp
ples of Anggkor Wat in Cambodia Souuth East Asiaa
Ha
ardi Utomo
Typpology of Reesidential Arrchitecture byy Activity Microeconom
M
mics
Etty
ty R. Kridarsso
The Developm
ment Of Chinnese Community (Pecinaan) In Surakaarta Cities, Central
C
Java,,
donesia
Ind
Naf
afi’ah Solikhaah
Fen
nce Comprom
mise Interestts Of An Inddividual And The City
Fra
anky Liauw
The Innovationn Code Of The
T Riversidde Areas Development, Between
B
Perriphery And
d
Urbban Core Off The Indonessia's Cities
Meekar Sari Sutteja
The Role Of Buuilding Pathoology To Realize Eco-Ho
ousing
Jam
mes Rilatupaa
The Time Lim
mit Parameterrs In Feasibiility Study of
o Using Sollar Panel Forr Household
d
Energy Consum
mption In Jakkarta
Meelissa Kania
Susstainable Hoousing Deveelopment Allong The River
R
Bank Ciliwung
C
Riiver’s Case::
Pro
oblem As Soolution
Da
arrundono
Waater-Filled Window”
W
Co
onstruction To
T Protect Sunlight
S
Heaat Propagatioon Into Thee
Rooom
Ferrmanto Lianto
Stuudents Percepptions On Trrans Jakarta Services
S
Lekksmono Suryyo Putranto, Herry Hartaanto
Un
nderstanding Travel Behaavior In Mottorcycle Cityy Through Household
H
Activity Timee
Alllocation
Okkto Risdianto Manullang
Thrreat Of Enviironmental Degradation
D
Due To Thee Exploitatio
on Of Shale Gas Besidess
Greeat Potential Shale Gas Inn Indonesia
Soffyan Ramadhhan, Hanif In
ndra Wicaksaana
Soiil Characteriization Of In
ndex Properties At Teleccommunication Network Site In Eastt
Jav
va, Indonesiaa
Ma
arelianda Al Dianty, Ahm
mad Shukri Yahaya,
Y
Fauzziah Ahmad
Coomparison Off Road User Cost Loss Due
D To Work Zone With
h The Delay Completion
n
Rooad Maintenaance Project
Deewa Ketut Sudarsana, Haarnen Sulistioo, Achmad Wicaksono,
W
Ludfi Djakfarr
Internation
nal Conferen
nce on Engineering of Tarumanagaraa (ICET 2013))
F
Faculty of En
ngineering, Tarumanagara University,,
onesia, 2‐3 O
October 2013
3
Jakarta‐Indo
C
CE-14
C
CE-16
C
CE-18
C
CE-19
C
CE-20
C
CE-21
E
EE-01
E
EE-02
E
EE-03
E
EE-04
E
EE-06
E
EE-08
IE-02
IE-04
IE-05
IE-06
IE-07
IE-08
IE-10
IE-11
The Availability Of Shalee As A Poteential Of Mass Movemeent For Idenntifying Thee
A Evaluation In A Connstruction, Case
C
Study: Meteseh,
M
Sem
marang.
Coonsideration And
Widiastuti Nur Farida, Ghu
ufran Helmi Aziz,
A
F.X. An
njar Trilaksoono
To Increase Thhe Damping On
O Passive Control
C
Device By Usingg Asphalt Maaterial
Da
aniel Christiaanto, Yuskar Lase
Impplementationn Of Viscosity Measurement On Plaastic And Viscous
V
Liquuid State Forr
Mu
udflow Case
Budijanto Widjjaja, Shannon
n Hsien-Henng Lee
A High
H
Dynam
mic Mobile Knowledge
K
Worker: Preeliminary Inssight To Thee Impact Off
The Smartphonne On Travell Behavior.
oriani Novitaa C., Ofyar Z.
Z Tamin, Idw
wan Santoso,, Miming Miiharja
Glo
The Influence of Aspect Ratio of Loocal Fibers on Flexural Properties of Reactivee
wder Concreete
Pow
Widodo Kusharrtomo, Suparrtono, Cindyy Angela
Funnding And Financing
F
Regional Road Maintenancce In Indonessia
Tioopan Henry M Gultom, Ofyar
O
Z Tamiin, Pradono, Ade Sjafrudddin
Perrformance Evvaluation of Zigbee Protoocol Using Simulink
S
Lyd
dia Sari, Theeresia Ghoza
ali
The role of the Indonesian universities
u
i New & Reenewable En
in
nergy
W
Rohani Jahja Widodo
Coomparative Analysis
A
Metthod For Enhhancing Thee Quality Im
mage Grayscaale Bayesian
n
Meethod Of Leaast Square Method
M
Gausssian Scale Mixtures And Wiener
Naanniek Andiyaani, Ainil Syaafitri, Bekti Yulianti,
Y
Yohhannes Dewaanto
Ho
ome Securityy Integrated System
S
By Using
U
A Shorrt Message (S
SMS) On Moobile Phoness
Using Microcontroller Atm
mega 8535
Tobbias, Bambaang Widodo, Yohannes Dewanto
Tellemetry Systtem Design On
O Payload Using
U
Flymaaple with AR
RM Cortex-M
M3
Izzah F. Akmalliah, Imam S Nugroho, Anndriani
Fouur Kinds of Testing
T
in Mobile
M
Appliccation "Diabeetes Risk Appplication (D
DBRA)"
Anindito Yoga Pratama,
P
Deewi Agushintta R., Remi Senjaya
S
An
nalysis Of Effect Of Body Mass Inddex (BMI) And
A Surfacee Area Of The
T Heel On
n
Fem
male Prospecctive Employyee During Walking
W
Andrijanto, Rirrin Nalurita
Disstance Estim
mation Withinn Peri-Personnal Space In Real And Viirtual Enviroonment
Din
no Caesaronn, Chiuhsiang
g Joe Lin
Silvver Meal Annd Part Period Algorithm
m In Producin
ng Minimum Lot Sizing Cost
C
Heendy Tannadyy
Inn
novation: Innnovative, Saafe, And Errgonomicallyy Suitable Tool
T
For Acctive Elderly
y
Peo
ople To Clim
mb Stairs.
Ard
dian Domingggo W., Vicario Reinaldoo, I Gusti Aguung Gede S., Fajar Wism
ma P.
Deecision Suppoort Tool For Job Shop Sccheduling Wiith Job Canccellation
Mu
uchamad Okttaviandri, Addnan Hassann, Awaluddin
n Mohd. Shah
haroun
An
nalysis of Appplication Loow Cost Auttomachine on Product Type Switch A8L on PT..
Om
mron Manufaacturing of Inndonesia
Silvvi Ariyanti, Ruly
R
Urbban Engineeering: Urbann Search Andd Rescue (U
USAR) Withiin Emergenccy Responsee
Sysstems In Connfined Spacee Rescue Using Serpentinne Robot
Khristian Edi Nugroho
N
Soebandrija, Sof
ofyan, Andre M.R. Wajongg, Meilani
Airrport Of Thee Future, Grreen Airportt And Aerottropolis: Induustrial Enginneering Andd
Arcchitecture Enngineering Perspective
P
Khristian Edi Nugroho
N
Soebandrija
Internation
nal Conferen
nce on Engineering of Tarumanagaraa (ICET 2013))
F
Faculty of En
ngineering, Tarumanagara University,,
onesia, 2‐3 O
October 2013
3
Jakarta‐Indo
IE-12
IE-13
IE-14
IE-15
IE-16
IE-17
IE-19
IE-21
IE-22
IE-23
IE-24
M
ME-01
M
ME-07
M
ME-10
M
ME-11
M
ME-12
M
ME-13
M
ME-16
M
ME-17
Ind
dustrial Engiineering And
d The Perspeectives On Leadership,
L
Performance,
P
, Innovation,,
Coompetitive Addvantage An
nd Sustainablle Competitivve Advantagge
Khristian Edi Nugroho
N
Soebandrija
Fraamework Deesign for Standard
S
Opperating Proocedures (SO
OP) Implem
mentation off
Cuultivation Andd Post-Harveest In Clusterr Biopharmaaca Karangan
nyar.
Noovita Hadininngrum, Retnoo Wulan Dam
mayanti, Fakkhrina Fahmaa
Tim
me Motion Study
S
at Packking Cable Work
W
Station,, Case Study at PT. X
I Wayan
W
Sukannia, Handika
Deesigning Queestionnaire for
f Empiricaal Study on Relationship
p Between TQM,
T
TPM,,
andd KM
Wilson Kosasihh
Mo
odel Developpment of Shhifting Bottleneck Heuriistik to Solv
ve Job Shopp Scheduling
g
Pro
oblem With Parallel
P
Macchines
Johhan Oscar Ong,
O
Imam Maulana
M
Traansformer Oil Insulation Analysis Baased On Breaakdown Volttage Testing At PT. PLN
N
(PE
ERSERO) Seervice And Production
P
Seemarang
Mo
ohammad Aggung Saryatm
mo
Using Augmennted Reality to
t Enhance Art
A Exhibitioon at Binus Innternational
Rayymond Bahaana, Bayu Prrakoso Dirgaantoro
Erggonomics Analysis
A
Thhe Porters Complaintts Against The Occuurrence Off
Mu
usculoskeletaal Disorders (MSDs) Using The Niossh Lifting Eqquation And PEI
P
Boyy Nurtjahyo M., Erlinda Muslim, Krissna Anga Ra
amadha, Deb
brina Puspitaarini
Recommendatiion Of Unlo
oading Proceess Equipmeent In Raw Material Sttore Of Fastt
Mo
oving Consum
mer Goods Plant
P
With V
Virtual Humaan Modeling Methodologgy
Erllinda Muslim
m, Boy Nurtjjahyo M., Heerman Adriann, Viky Muruuatut
Deesigning Ergoonomic Pack
kaging Line W
Workstation With Simulaation Methodds
Ma
aya Arlini Puuspasari, Erllinda Muslim
m, Feronika, Atiqah
A
Zulfa
a Nadia
Lin
ne Assemblyy Analysis For
F R-223 Product
P
By Kilbridge-W
K
Wester Heurisstic Method,,
Heelgeson-Birniie Method And
A Moodie Y
Young Methood At PT. Mulia
M
Knittingg Factory
Linna Gozali, Siilvi Ariyanti, Elizabeth Maria
M
Elaastic Normal Contact Of A Rough Suurface With Interaction
I
Between
B
Aspeerities Using
g
Elaastic Halfspaace Theory
Ruggerri Toni Liong
Sam
mpling Tools Product Deesign Processs On Pre Heaater Process In Cement Production
P
Ed
di Sutoyo, Yohhanes Dewannto, Agri Suw
wandi
Sollarcell Desiggn Inverter To Supply Thhe Load At 50
0 W, 50 Hz
Syaahrul Alamsyyah, I.A. Darryanto D., Munnik
M
H., Yoohannes Dew
wanto
Neew And Reneewable Energgy By Using Magnets Too Generate Ellectricity
Dzulfi S. Priharrtanto, Suharlan, Gede Eka
E Lesmana
a, Yohannes Dewanto
D
Mo
odel Of Chharge Carrieer Rocket Launcher On
O Research
h Measurinng Pressure,,
Tem
mperature, And
A Humiditty
Mo
ochammad Illham Attharikk, Ahmad Hiidayat Furqoon, Pinardi, Eko
E
The Use Of Raamie Fiber In
n HDPE Matrrix Composite In The Reehabilitation Of Scoliosiss
Pattients
Liees Banowati, Bambang Kismono
K
Haddi
The Effects An
A Environm
ment Can Cause
C
On Low
L
Alloy Steel at A Variety off
mperatures
Tem
Erw
win Siahaan
Efffect Of Diffferent Bend-Twist Coupling Topolog
gies on Indu
uced Twist and Cost off
Wiind Turbine Adaptive
A
Blaades
Rahul Bagali, Hui
H Zhang, Alireza
A
Maheeri
Internation
nal Conferen
nce on Engineering of Tarumanagaraa (ICET 2013))
F
Faculty of En
ngineering, Tarumanagara University,,
onesia, 2‐3 O
October 2013
3
Jakarta‐Indo
M
ME-18
M
ME-19
M
ME-22
M
ME-24
M
ME-26
M
ME-27
M
ME-29
M
ME-30
M
ME-32
M
ME-33
M
ME-34
U
UE-01
U
UE-02
U
UE-03
Up
pdated Cost Modeling
M
Off Hybrid Rennewable Enerrgy System Components
C
Fadi Kahwash, Alireza Mahheri
A Genetic
G
Algoorithm For Optimal
O
Distrribution Of Aerofoils
A
On Wind Turbiine Blades
Fadi Kahwash, Alireza Mahheri
Exppert System
m Application In Designn Automatioon For Threee Degree Of
O Freedom
m
Veertical CNC Milling
M
Machhine
Ag
gus Halim, Diidi Widya Uttama, Jemmyy Septiawan
Efffect of Rake Angle in th
he Turning Process
P
on th
he Surface Roughness
R
off Workpiecee
AIS
SI 4340 Steeel
Sob
bron Lubis, Rosehan,
R
Deenny Handokko
Joiint Propertiess Of Frictionn Stir Weldeed 6063 t3 Aluminum
A
A
Alloys
With Variation
V
Off
Preeheat Methodd
Yusstiasih Purw
waningrum, Medilla
M
Kusrriyanto, Lulu Supriyanto
Expperimental Study
S
Characcterization Buurner Gas Fllame Bioethaanol Sago Reesidual
I Made
M
Kartikaa Dhiputra, Numberi
N
Johni Jonatan
Deesign Of Fifoo Pick And Deposit
D
Systeem
Ricchard Jonathhan Salli, Ag
gustinus Purnna Irawan, Danardono
D
A.S.
Rey
ynolds Num
mbers Effectss On Velocitty Distributioon In Combu
ustion Cham
mber Inlet Off
A Proto
P
X-2 Biioenergy Miccro Gas Turbbine
Steeven Darmaw
wan, Ahmad Indra Siswanntara, Budiaarso
Coooling Effect of Capillary
y Tube for Reefrigerator
Ha
arto Tanujayaa
Enhhancing the Perfomance of Corruggated Panelss Under Blaast Loading: Numericall
An
nalysis
Christian Wijayya, Johan Osscar Ong
Energy Efficiennt Cold Storrage As Hybbrid Refrigeraation Machinne Using Heeating Effectt
om Condenseer With Hyddrocarbon Reefrigerant Subbstituted Forr R-22
Fro
Azrridjal Aziz, Herisiswanto
H
o, Afdhal Kurrniawan Maiinil
To Promote Jakkarta City ass one of an excited Touurist Destination in Asia towards thee
Asian Economiic Communitty (AEC)
Priiyendiswara
Inn
novative Usee Wood And
d Bamboo Use
U As Ren
newable Finiishing Materrials In Thee
Buuilding Application
Syllvie Wirawatti
Aft
fter 25 Yearrs of New Town
T
Development in Jakarta
J
Metrropolitan Arrea (JMA) Pro
ofile and Traansformation
Lioong Ju Tjungg, Suryono Herlambang,
H
I
Indah
Susiloowati, Regina
a Suryadjaja
Internation
nal Conferen
nce on Engineering of Tarumanagaraa (ICET 2013))
F
Faculty of En
ngineering, Tarumanagara University,,
onesia, 2‐3 O
October 2013
3
Jakarta‐Indo
Paralllel Session Schedule
Day/Date
Timee
W
Wednesday
2 October
O
20133
13.00-155.00
13.00-155.00
13.00-155.00
13.00-155.00
15.00-155.30
15.30-177.30
15.30-177.30
15.30-177.30
15.30-177.30
Thursday
3 October
O
20133
09.00-122.00
09.00-122.00
09.00-122.00
09.00-122.00
m
Room
No
1
2
3
4
Paper ID
D
1
2
3
4
AE-01, AE-05,
A
AE-006, CE-06, CE-19
IE-02, IE
E-04, IE-05, IE-06,
I
IE-07
7
IE-19, IE
E-21, IE-22, IE-23,
I
ME-007
ME-10, ME-11,
M
ME--18, ME-27, ME-34
Coffee Brreak
CE-07, CE-09,
C
CE-11, CE-14, CE
E-18, CE-21
EE-01, EE-02,
E
EE-03
3, EE-04, EE
E-06, EE-08
IE-10, IE
E-11, IE-12, IE-13,
I
IE-16
6, IE-19
ME-12, ME-13,
M
ME--17, ME-19, ME-26, ME-33
1
2
3
4
AE-02, AE-04,
A
AE-007, AE-08, AE-09,
A
AE-122, AE-14
AE-13, AE-15,
A
CE-003, CE-16, CE
E-20
ME-01, ME-16,
M
ME--22, M-24, M-29,
M
M-30, M-32
M
IE-08, IE
E-14, IE 15, IE-17,
I
IE-24, UE-01, UE
E-02, UE-03
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
ANALYSIS OF EFFECT OF BODY MASS INDEX (BMI)
AND SURFACE AREA OF THE HEEL
ON FEMALE PROSPECTIVE EMPLOYEE DURING WALKING
Andrijanto1), Ririn Nalurita2
1)
2)
Maranatha Christian University, Jl. Prof. drg. Surya Sumantri No. 65, Bandung 40164, Indonesia
Maranatha Christian University, Jl. Prof. drg. Surya Sumantri No. 65, Bandung 40164, Indonesia
e-mail: anto.andry@yahoo.co.id
Abstract
Good appearance is needed to give a good impression. The professionalism of company sometimes is
measured subjectively by the appearance of employee. Female employee wears a shoe with heel to give more
confidence on her appearance. It is not easy for female prospective employee to walk with that kind of shoe.
Generally they are first graduate and occasionally wearing a shoe with heel in their activity. The purpose of
research is to find an ideal shoe for female prospective employee. Black box method is used in this research.
Four models of shoe are wornalternatelyby 2 groups of BMI(16.0-18.5, 18.6-21.0). The effects aredelta heart
pulse (kdj) and travel time (wt), 72 objects are measured during walking. The result is tested by3 ways
ANOVA andthe effect is discussed.T test is used to find the ideal shoe.
Keywords: Female Shoe, Walking, Physiology, Ergonomic
INTRODUCTION
Generally university student choose a casual shoe or sport shoeduring activities
in campus. Occasionally they are wearing a formal shoe for attending seminar or doing
a presentation. In transition from student to be professional employee, male student do
not have any problem with the formalshoe, but female student have to be wonted
wearing a heel shoe for supporting their appearance.
The moving activities of female employeein the office will be done in 3 ways,
there are a walkingstraight, upstairs, and downstairs[1]. The ideal heel height is 2cm[1].
The purpose of this research is to find an ideal shoe for female prospective employee.
The ideal shoe considers a shoe model and heel surface area instead of random
model[1]. First model,foot is covered by shoe and2nd model, under ankle and heel is
open can be tighten by belt.Two kinds of heel surface area are 1.8 cm2 and 7.5 cm2,
and the available sizes are37 and 38 (European size) can be selected by student. Table
1.1 shows the combinations of model, heel area, and heel height.In this research body
height is considered instead of body weight only[1] then body mass index (BMI) is used.
Table 1 Shoe model, heel area, and heel height
Model
1
2
Heel Area
(cm2)
1.8
7.5
1.8
7.5
Heel height
(cm)
2
2
2
2
Code
1.1
1.3
2.1
2.3
MATERIALS AND METHOD
Seventy two students at semester 7 of 8 are measured. They are divided by 2
groups of body mass index (BMI), first group at range 16.0 – 18.5 (under weight,
IOTF, WHO 2000) and second group at range 18.6 – 21.0 (normal, IOTF, WHO
IE-02 | 1
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
2000). The measurement is done when they are doing the activities, bare foot and
wearing 4 models of shoe respectively.Walking straight would be walking 30 m
straight. Upstairs and downstairs would be walking up and down 2 floors (21 steps
each floor), with 17 cm step height and 29 cm step depth. Scenarios of measurement
can be seen at figure1and figure 2.
Figure 1 Walking straight scenario
Figure 2 Upstairs – downstairs scenario
The heart pulse during activities is obtained by measuring pulse before and
after activity. Wrist pulse meter is used to get the data. The travel time in second (wt)
is measured by using stopwatch. The normality is done for both data by using
Goodness of fit test with 95% confidence and 5% accuracy. Delta heart pulse (kdj) is
obtained by subtract working pulse and rest pulse. Kdj describes the increasing of
heart pulse after doing an activity, figure 3 shows that condition.
IE-02 | 2
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Figure 3 Heart pulse pattern
The effect of BMI, shoe model, and heel area on wt and kdj will be tested by using
3-way ANOVA for 3 activities. The test is done by using SPSS ver.11.5 statistic software.
The result will be discussed and the ideal model is obtained by using T-test.
RESULTS AND DISCUSSION
Three-way ANOVA test has been done, the result can be seen on table 2.
Dependent will give an influence on independent when the significant value
1st International Conference on Engineering of Tarumanagara
(ICET 2013)
“Urban Engineering for Future Generation”
Jakarta, 2-3 October 2013
ISBN: 978-979-99723-9-2
FACULTY OF ENGINEERING
TARUMANAGARA UNIVERSITY
JAKARTA-INDONESIA
2013
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Forewords
Chairman of the Organizing Committee
First of all let’s pray and say thanks to God for giving us His mercy and blessings.
The development of technology nowadays is growing up so fast. It aims to meet the
necessary of the community to get a better life. Technological innovation which needed to
develop technology products that can help people in improving their lives. Therefore the
academics are not only required to implement the learning process, but also have to do
research and community service to produce innovative scientific research.
Indonesian academics today are eager to involve in research activities. Therefore we
required a scientific forum for mutual discussion, exchange information about the research
that has been carried out especially related to Urban Engineering.
Faculty of Engineering, University of Tarumanagara conducts the first international
conference to bring the academics, researchers to develop their knowledge and exchange
ideas so that the researchers can improve the results of research that has been done. The
conference called the International Conference on Engineering Tarumanagara, 2013, which
is held on the Auditorium at the 8th floor of M Building, Campus I, University of
Tarumanagara from 2 to 3 October 2013. The ICET 2013 conference theme is Urban
Engineering for Future Generations. Future generations as the frontier of national
development should be prepared from now on, along with the necessary infrastructure. The
role of technology is to support the enhancement of the ability of future generations. This
event includes to the presentation of scientific papers by keynote speakers, parallel
sessions presenting papers of academics and research poster exhibition.
The more extensive the information obtained, the more knowledge that we gained. Some
papers submitted by researchers and academics from different countries such as United
Kingdom, Germany, Taiwan, Singapore, Iran, Malaysia, Sri Lanka, and Japan, will enrich
the science and technological development.
This conference proceedings contain the full text of all papers presented International
Conference on Engineering of Tarumanagara 2013. Papers are categorized based on
Engineering disciplines set by the organizing committee. Then, the presentation is divided
into parallel sessions.
On this occasion I would like to thank to: Foundation of Tarumanagara, Rector of
Tarumanagara University, Dean of Faculty of Engineering Tarumanagara University and
Sponsors of ICET 2013, for the support and help that has been given. I also would like to
thank the authors for their contributions.
Finally I would like to apologies if there are deficiencies in the activity.
Thank you for all the attention.
Dr. M. Sobron Yamin Lubis
Chairman of the Organizing Committee
i
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Forewords
Dean of Faculty of Engineering
I would like to warmly welcome all participants of the International Conference on
Engineering of Tarumanagara (ICET 2013). This conference is organized by Faculty of
Engineering, Tarumanagara University. The main aim of this conference was to respond
the problem related to urban engineering for future generation. As this conference was
designed to gather scientists, engineers, practitioners, and industries in engineering related
disciplines, I expect intense discussion will happen among them so that some brilliant ideas
to be used to improve the quality of human life can be produced.
I hope this conference will create an international networking and collaborating, especially
in engineering research and publication.
I would like to congratulate the organizing committee of ICET 2013, for their outstanding
efforts. I would also like to express my gratitude to the sponsors for their contributions in
making this conference a resounding success.
I wish the International Conference on Engineering of Tarumanagara (ICET 2013) a very
useful and fruitful occasion.
Thank you for your attention and contribution.
Dr. Agustinus Purna Irawan
Dean of Faculty of Engineering
ii
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Forewords
Rector of Tarumanagara University
Distinguished Guests, Ladies and Gentlemen,
I am delighted to have the opportunity to give a welcoming speech on this International
conference where the issues of Urban Engineering for Future Generation will be addressed.
And I believe these issues are crucial and important not only for our future generation but
also for our planet where we live.
The progressive development in technology particularly in the 21-st century has brought
the impact to human life. The way we communicate and the way we live have changed
along with the development of the technology. In order to cater these needs, the natural
resources are explored, buildings and industries have been built. As results of this
development, the echo system is affected. In one hand, we have been successful to build
our planet to cater our needs and on the other hands, gradually the stability our planet has
been ruined. The question is; who is responsible or who is to be blamed on this ordeal.
Despite all problems we might encounter as we go with this life, we have to protect our
only planet.
In order to find the solution to these problems, many conferences and seminars have been
conducted on the issues of Urban and Sustainability. Most of the time, people conceive of
the programs in the last 10-15 years and anticipate for the future. Since the Kyoto Protocol
in 1997 in Tokyo until the World Sustainable Building Conferences (SB11) in Helsinki in
2011, thousands of papers have been published. Many aspects of the future of the world for
our future generation have been discussed. Many rating systems have been developed and
yet many issues still need the attention of the scientists.
In broad, the issues can be categorized in three aspects i.e., social aspects, ecological
aspects and, environmental aspects. The deterioration of these aspects can be minimized
from the technical dimension. However, there is one aspect that is less discussed and
considered i.e., cultural aspect. The culture and the way of life in each country might be
different. For instance, those who live in the sub-tropical countries might be different from
those in the tropical countries. Eventhough they are interrelated, but each of them has to be
explored.
Today, we meet in this conference to exchange the knowledge and the information in many
aspects of the sustainability and technology. I hope in this conference, the participants not
only can share but also can learn on the sustainable issues.
Thank you.
Prof. Ir. Roesdiman Soegiarso, M.Sc., Ph.D.
Rector of Tarumanagara University
iii
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Scientific Committee
Dr. Leksmono S. Putranto
Prof. Satoyuki Kawano
Prof. Robert Vale
Prof. Brenda Vale
Prof. Mohd. Zulkifly b. Abdullah
Dr. Ing. Joewono Prasetijo
Dr. Thomas
Dr. Ing. A. Rugerri Toni L.
Dr. Bambang K. Hadi
Prof. Indarto
Prof. Tresna P. Soemardi
Prof. I Made Kartika
Prof. Danardono A. S.
Prof. Eddy S. Siradj.
Dr. Yono Reksoprodjo
Prof. Tjokorda Gde T.N.
Prof. Kuncoro Diharjo
Prof. Hadi Sutanto
Dr. Rianti Ariobimo
Prof. Roesdiman Soegiarso
Prof. Chaidir A. Makarim
Prof. Tri Harso Karyono
Dr. Agustinus Purna Irawan
Dr. Adianto
Dr. Harto Tanujaya
Dr. Lamto Widodo
Dr. Jo Santoso
Dr. Agustinus Sutanto
Dr. Danang Priatmodjo
Dr. Naniek Widayati
Dr. Wati A. Pranoto
Dr. Najid
Tarumanagara University (Chair)
Osaka University
Victoria University of Wellington
Victoria University of Wellington
Universiti Sains Malaysia
Universiti Tun Hussein Onn
Tarumanagara University, and
National University of Singapore
Atma Jaya Catholic University of Indonesia, and
Karlsruhe Institut fur Technologie
Bandung Institute of Technology
University of Gadjah Mada
University of Indonesia
University of Indonesia
University of Indonesia
University of Indonesia
University of Indonesia
Udayana University
Sebelas Maret University
Atma Jaya Catholic University of Indonesia
Trisakti University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Tarumanagara University
Organizing Committee
Chairman
Vice Chairman
Conference Secretariat
Dr. M. Sobron Yamin Lubis
Priyendiswara A.B., M.Com
Dr. Harto Tanujaya
Regina Suryadjaja, M.T.
Mekarsari, M.Sc.
Dewi Linggasari, M.T.
iv
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Table of Content
Forewords: Chairman of the Organizing Committee
Forewords: Dean of Faculty of Engineering
Forewords: Rector of Tarumanagara University
Scientific Committee
Organizing Committee
Table of Content
Invited Papers
CFD modeling on Capillary Flow of Wave Soldering
M.S. Abdul Aziz, M.Z. Abdullah, C.Y. Khor, F. Che Ani
i
ii
iii
iv
v
vi
1-8
List of Papers
Paper ID
AE-01
AE-02
AE-04
AE-06
AE-07
AE-08
AE-09
AE-12
AE-13
AE-14
AE-15
CE-03
Title
Author/Authors
Exploring What Influences Motorcycle Use for Daily Travel with Theory of
Planned Behavior
Siti Fatimah, B. Kombaitan, Gatot Yudoko, Tubagus Furqon
Existential Expression Of Extension Building In Children Library By Tadao
Ando Is Spirit Of Age
Rudy Trisno, Antariksa, Sudikno, Purnama Salura
Virtual Gamer Space as the Possible Future City Shaper
Andi Surya Kurnia
Typology of Residential Architecture by Activity Microeconomics
Etty R. Kridarso
The Development Of Chinese Community (Pecinan) In Surakarta Cities,
Central Java, Indonesia
Nafi’ah Solikhah
Fence Compromise Interests Of An Individual And The City
Franky Liauw
An Idea Planning Of The Urban Water-Based Development In The
Indonesia's Cities Case Study: Tanjung Priok, The North Of Jakarta,
Indonesia
Mekar Sari Suteja
The Role Of Building Pathology To Realize Eco-Housing
James Rilatupa
The Time Limit Parameters In Feasibility Study of Using Solar Panel For
Household Energy Consumption In Jakarta
Melissa Kania
Sustainable Housing Development Along The River Bank Ciliwung River’s
Case: Problem As Solution
Darrundono
Water-Filled Window” Construction To Protect Sunlight Heat Propagation
Into The Room
Fermanto Lianto
Students Perceptions On Trans Jakarta Services
Leksmono Suryo Putranto, Herry Hartanto
pp
1-8
1-7
1-7
1-12
1-9
1-8
1-7
1-9
1-8
1-4
1-16
1-7
v
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Paper ID
CE-06
CE-07
CE-09
CE-11
CE-14
CE-16
CE-18
CE-19
CE-20
CE-21
EE-01
EE-02
EE-03
EE-04
EE-06
EE-08
IE-02
Title
Author/Authors
Understanding Travel Behavior In Motorcycle City From Household
Activity Time Allocation
Okto Risdianto Manullang
Threat Of Environmental Degradation Due To The Exploitation Of Shale
Gas Besides Great Potential Shale Gas In Indonesia
Sofyan Ramadhan, Hanif Indra Wicaksana
Soil Characterization Of Index Properties At Telecommunication Network
Site In East Java, Indonesia
Marelianda Al Dianty, Ahmad Shukri Yahaya, Fauziah Ahmad
Comparison Of Road User Cost Loss Due To Work Zone With The Delay
Completion Road Maintenance Project
Dewa Ketut Sudarsana, Harnen Sulistio, Achmad Wicaksono, Ludfi Djakfar
The Availability Of Shale As A Potential Of Mass Movement For
Identifying The Consideration And Evaluation In A Construction, Case
Study: Bukit Agung Regency, Gunungpati, Semarang
Widiastuti Nur Farida, Ghufran Helmi Aziz, F.X. Anjar Trilaksono
To Increase The Damping On Passive Control Device By Using Asphalt
Material
Daniel Christianto, Yuskar Lase
Implementation Of Viscosity Measurement On Plastic And Viscous Liquid
State For Mudflow Case
Budijanto Widjaja, Shannon Hsien-Heng Lee
A High Dynamic Mobile Knowledge Worker: Preliminary Insight To The
Impact Of The Smartphone On Travel Behavior.
Gloriani Novita C., Ofyar Z. Tamin, Idwan Santoso, Miming Miharja
The Influence of Aspect Ratio of Local Fibers on Flexural Properties of
Reactive Powder Concrete
Widodo Kushartomo, Supartono, Cindy Angela
Funding And Financing Regional Road Maintenance In Indonesia
Tiopan Henry M Gultom, Ofyar Z Tamin, Pradono, Ade Sjafruddin
Performance Evaluation Of Zigbee Protocol Using Simulation Model
Lydia Sari, Theresia Ghozali
The role of the Indonesian universities in New & Renewable Energy
Rohani Jahja Widodo
Comparative Analysis Method For Enhancing The Quality Image Grayscale
Bayesian Method Of Least Square Method Gaussian Scale Mixtures And
Wiener
Nanniek Andiyani, Ainil Syafitri, Bekti Yulianti, Yohannes Dewanto
Home Security Integrated System By Using A Short Message (SMS) On
Mobile Phones Using Microcontroller Atmega 8535
Tobias, Bambang Widodo, Yohannes Dewanto
Telemetry System Design On Payload Using Flymaple with ARM CortexM3
Izzah F. Akmaliah, Imam S Nugroho, Andriani
Four Kinds of Testing in Mobile Application "Diabetes Risk Application
(DBRA)"
Anindito Yoga Pratama, Dewi Agushinta R., Remi Senjaya
Analysis Of Effect Of Body Mass Index (BMI) And Surface Area Of The
Heel On Female Prospective Employee During Walking
Andrijanto, Ririn Nalurita
pp
1-9
1-7
1-6
1-8
1-8
1-8
1-7
1-9
1-7
1-11
1-6
1-8
1-8
1-7
1-6
1-9
1-7
vi
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Paper ID
IE-04
IE-05
IE-06
IE-07
IE-08
IE-10
IE-11
IE-12
IE-13
IE-14
IE-15
IE-16
IE-17
IE-19
IE-21
IE-22
Title
Author/Authors
Distance Estimation Within Peri-Personal Space In Real And Virtual
Environment
Dino Caesaron, Chiuhsiang Joe Lin
Silver Meal And Part Period Algorithm In Producing Minimum Lot Sizing
Cost
Hendy Tannady
Imovation: Innovative, Safe, And Ergonomically Suitable Tool For Active
Elderly People To Climb Stairs.
Ardian Dominggo W., Vicario Reinaldo, I Gusti Agung Gede S., Fajar
Wisma P.
Decision Support Tool For Job Shop Scheduling With Job Cancellation
Muchamad Oktaviandri, Adnan Hassan, Awaluddin Mohd. Shaharoun
Analysis of Application Low Cost Automachine on Product Type Switch
A8L on PT. Omron Manufacturing of Indonesia
Silvi Ariyanti, Ruly
Urban Engineering: Urban Search And Rescue (USAR) Within Emergency
Response Systems In Confined Space Rescue Using Serpentine Robot
Khristian Edi Nugroho Soebandrija, Sofyan, Andre M.R. Wajong, Meilani
Airport Of The Future, Green Airport And Aerotropolis: Industrial
Engineering And Architecture Engineering Perspective
Khristian Edi Nugroho Soebandrija
Industrial Engineering And The Perspectives On Leadership, Performance,
Innovation, Competitive Advantage And Sustainable Competitive
Advantage
Khristian Edi Nugroho Soebandrija
Framework Design for Standard Operating Procedures (SOP)
Implementation of Cultivation And Post-Harvest In Cluster Biopharmaca
Karanganyar.
Novita Hadiningrum, Retno Wulan Damayanti, Fakhrina Fahma
Time Study At Packing Cable Work Station, Case Study At PT. X
I Wayan Sukania, Handika
Designing Questionnaire for Empirical Study on Relationship Between
TQM, TPM, and KM
Wilson Kosasih
Model Development of Shifting Bottleneck Heuristic to Solve Job Shop
Scheduling Problem With Parallel Machines
Johan Oscar Ong, Imam Maulana
Transformer Oil Insulation Analysis Based On Breakdown Voltage Testing
At PT. PLN (PERSERO) Service And Production Semarang
Mohammad Agung Saryatmo
Using Augmented Reality to Enhance Art Exhibition at Binus International
Raymond Bahana, Bayu Prakoso Dirgantoro
Ergonomics Analysis The Porters Complaints Against The Occurrence Of
Musculoskeletal Disorders (MSDs) Using The Niosh Lifting Equation And
PEI
Boy Nurtjahyo M., Erlinda Muslim, Krisna Anga Ramadha, Debrina
Puspitarini
Recommendation Of Unloading Process Equipment In Raw Material Store
Of Fast Moving Consumer Goods Plant With Virtual Human Modeling
Methodology
Erlinda Muslim, Boy Nurtjahyo M., Herman Adrian, Viky Muruatut
pp
1-5
1-4
1-7
1-8
1-12
1-6
1-7
1-7
1-8
1-6
1-5
1-6
1-10
1-5
1-8
1-8
vii
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Paper ID
IE-23
IE-24
ME-01
ME-07
ME-10
ME-11
ME-12
ME-13
ME-16
ME-17
ME-18
ME-19
ME-20
ME-22
ME-24
ME-26
ME-27
ME-29
Title
Author/Authors
Designing Ergonomic Packaging Line Workstation With Simulation Methods
Maya Arlini Puspasari, Erlinda Muslim, Feronika, Atiqah Zulfa Nadia
Line Assembly Analysis For R-223 Product By Kilbridge-Wester Heuristic
Method, Helgeson-Birnie Method And Moodie Young Method At PT. Mulia
Knitting Factory
Lina Gozali, Silvi Ariyanti, Elizabeth Maria
Elastic Normal Contact Of A Rough Surface With Interaction Between
Asperities Using Elastic Halfspace Theory
Rugerri Toni Liong
Sampling Tools Product Design Process On Pre Heater Process In Cement
Production
Edi Sutoyo, Yohanes Dewanto, Agri Suwandi
Solarcell Design Inverter To Supply The Load At 50 W, 50 Hz
Syahrul Alamsyah, I.A. Daryanto D., Munnik H., Yohannes Dewanto
New And Renewable Energy By Using Magnets To Generate Electricity
Dzulfi S. Prihartanto, Suharlan, Gede Eka Lesmana, Yohannes Dewanto
Model Of Charge Carrier Rocket Launcher On Research Measuring
Pressure, Temperature, And Humidity
Mochammad Ilham Attharik, Ahmad Hidayat Furqon, Pinardi, Eko
The Use Of Ramie Fiber In HDPE Matrix Composite For The Rehabilitation
Of Scoliosis Patients
Lies Banowati, Bambang Kismono Hadi
The Effects An Environment Can Cause On Low Alloy Steel at A Variety of
Temperatures
Erwin Siahaan
Effect Of Different Bend-Twist Coupling Topologies on Induced Twist and
Cost of Wind Turbine Adaptive Blades
Rahul Bagali, Hui Zhang, Alireza Maheri
Updated Cost Modeling Of Hybrid Renewable Energy System Components
Fadi Kahwash, Alireza Maheri
A Genetic Algorithm For Optimal Distribution Of Aerofoils On Wind
Turbine Blades
Fadi Kahwash, Alireza Maheri
Thermal Properties Analysis Of Multy Component Material As Thermal
Energy Storage Material
Suditama, Budhi S.K.
Expert System In Design Automation For Customized Product Development
- Three Degree Of Freedom Vertical CNC Milling Machine
Agus Halim, Didi Widya Utama, Jemmy Septiawan
Effect of Rake Angle in the Turning Process on the Surface Roughness of
Workpiece AISI 4340 Steel
Sobron Lubis, Rosehan, Denny Handoko
Joint Properties Of Friction Stir Welded 6063 t3 Aluminum Alloys With
Variation Of Preheat Method
Yustiasih Purwaningrum, Medilla Kusriyanto, Lulu Supriyanto
Experimental Study Characterization Burner Gas Flame Bioethanol Sago
Residual
I Made Kartika Dhiputra, Numberi Johni Jonatan
Design Concept Of Fifo Pick And Deposit System
Richard Jonathan Salli, Agustinus Purna Irawan, Danardono A.S.
pp
1-7
1-11
1-8
1-7
1-6
1-6
1-6
1-5
1-10
1-7
1-7
1-7
1-9
1-8
1-9
1-6
1-4
1-7
viii
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Paper ID
ME-30
Title
Author/Authors
Comparison Of Turbulence Models On Reynolds Numbers Of A Proto X-2
Bioenergy Micro Gas Turbine’s Compressor Discharge
Steven Darmawan, Ahmad Indra Siswantara, Budiarso
pp
1-9
ME-31
Polymer Matrix Composite Mechanical Properties Of Two Types Woven
Sofyan Djamil, Sobron Y Lubis, Hartono
1-5
ME-32
Cooling Effect of Capillary Tube in Refrigerator
Harto Tanujaya
Enhancing the Perfomance of Corrugated Panels Under Blast Loading:
Numerical Analysis
Christian Wijaya, Johan Oscar Ong
Energy Efficient Cold Storage As Hybrid Refrigeration Machine Using
Heating Effect From Condenser With Hydrocarbon Refrigerant Substituted
For R-22
Azridjal Aziz, Herisiswanto, Afdhal Kurniawan Mainil
To Promote Jakarta City as one of an excited Tourist Destination in Asia
towards the Asian Economic Community (AEC)
Priyendiswara
Innovative Use Wood And Bamboo Use As Renewable Finishing Materials
In The Building Application
Sylvie Wirawati
Evaluation Of 25 Years Of Development Of The New Towns In
Jabodetabek: Profile
Liong Ju Tjung, Suryono Herlambang, Indah Susilowati, Regina Suryadjaja
The Lineage Of Ict Development: The Case Of Batam Island
Adiwan Aritenang
1-5
ME-33
ME-34
UE-01
UE-02
UE-03
UE-04
1-2
1-8
1-8
1-8
1-10
1-5
Parallel Session Schedule
Day/Date
Time
Wednesday
2 October 2013
13.00-15.00
13.00-15.00
13.00-15.00
13.00-15.00
15.00-15.30
15.30-17.30
15.30-17.30
15.30-17.30
15.30-17.30
Thursday
3 October 2013
Room
No
1
2
3
4
1
2
3
4
09.00-12.00
1
09.00-12.00
2
09.00-12.00
3
09.00-12.00
4
Paper ID
AE-01, AE-06, UE-04, CE-06, CE-19
IE-02, IE-04, IE-05, IE-06, IE-07
IE-19, IE-21, IE-22, IE-23, ME-07
ME-10, ME-11, ME-18, ME-20, ME-27, ME-34
Coffee Break
CE-07, CE-09, CE-11, CE-14, CE-18, CE-21
EE-01, EE-02, EE-03, EE-04, EE-06, EE-08
IE-10, IE-11, IE-12, IE-13, IE-16
ME-12, ME-13, ME-17, ME-19, ME-26, ME-33
AE-02, AE-04, AE-07, AE-08, AE-09, AE-12,
AE-14
AE-13, AE-15, CE-03, CE-16, CE-20
ME-01, ME-16, ME-22, ME-24, ME-29, ME-30,
ME-31, ME-32
IE-08, IE-14, IE-15, IE-17, IE-24, UE-01, UE-02,
UE-03
ix
Internation
nal Conferen
nce on Engineering of Tarumanagaraa (ICET 2013))
F
Faculty of En
ngineering, Tarumanagara University,,
onesia, 2‐3 O
October 2013
3
Jakarta‐Indo
List of Pap
pers
International Confference on Engineerin
E
ng of Tarum
managara (ICET
(
20133)
Pap
per ID
A
AE-01
A
AE-02
A
AE-04
A
AE-05
A
AE-06
A
AE-07
A
AE-08
A
AE-09
A
AE-12
A
AE-13
A
AE-14
A
AE-15
C
CE-03
C
CE-06
C
CE-07
C
CE-09
C
CE-11
Title
Autthor/Authorrs
Expploring Whaat Influencess Motorcyclee Use for Daily Travel with Theoryy of Planned
d
Behhavior
Sitii Fatimah, B.
B Kombaitann, Gatot Yudooko, Tubaguss Furqon
Existential Exppression Of Extension Building
B
In Children
C
Libbrary By Taddao Ando Iss
Spiirit Of Age
Rudy Trisno, Antariksa, Suddikno, Purnaama Salura
Virrtual Gamerss Space as thhe Possible Fuuture City Sh
haper
Andi Surya Kurrnia
Ideentification of
o Characterr Areas Arouund the temp
ples of Anggkor Wat in Cambodia Souuth East Asiaa
Ha
ardi Utomo
Typpology of Reesidential Arrchitecture byy Activity Microeconom
M
mics
Etty
ty R. Kridarsso
The Developm
ment Of Chinnese Community (Pecinaan) In Surakaarta Cities, Central
C
Java,,
donesia
Ind
Naf
afi’ah Solikhaah
Fen
nce Comprom
mise Interestts Of An Inddividual And The City
Fra
anky Liauw
The Innovationn Code Of The
T Riversidde Areas Development, Between
B
Perriphery And
d
Urbban Core Off The Indonessia's Cities
Meekar Sari Sutteja
The Role Of Buuilding Pathoology To Realize Eco-Ho
ousing
Jam
mes Rilatupaa
The Time Lim
mit Parameterrs In Feasibiility Study of
o Using Sollar Panel Forr Household
d
Energy Consum
mption In Jakkarta
Meelissa Kania
Susstainable Hoousing Deveelopment Allong The River
R
Bank Ciliwung
C
Riiver’s Case::
Pro
oblem As Soolution
Da
arrundono
Waater-Filled Window”
W
Co
onstruction To
T Protect Sunlight
S
Heaat Propagatioon Into Thee
Rooom
Ferrmanto Lianto
Stuudents Percepptions On Trrans Jakarta Services
S
Lekksmono Suryyo Putranto, Herry Hartaanto
Un
nderstanding Travel Behaavior In Mottorcycle Cityy Through Household
H
Activity Timee
Alllocation
Okkto Risdianto Manullang
Thrreat Of Enviironmental Degradation
D
Due To Thee Exploitatio
on Of Shale Gas Besidess
Greeat Potential Shale Gas Inn Indonesia
Soffyan Ramadhhan, Hanif In
ndra Wicaksaana
Soiil Characteriization Of In
ndex Properties At Teleccommunication Network Site In Eastt
Jav
va, Indonesiaa
Ma
arelianda Al Dianty, Ahm
mad Shukri Yahaya,
Y
Fauzziah Ahmad
Coomparison Off Road User Cost Loss Due
D To Work Zone With
h The Delay Completion
n
Rooad Maintenaance Project
Deewa Ketut Sudarsana, Haarnen Sulistioo, Achmad Wicaksono,
W
Ludfi Djakfarr
Internation
nal Conferen
nce on Engineering of Tarumanagaraa (ICET 2013))
F
Faculty of En
ngineering, Tarumanagara University,,
onesia, 2‐3 O
October 2013
3
Jakarta‐Indo
C
CE-14
C
CE-16
C
CE-18
C
CE-19
C
CE-20
C
CE-21
E
EE-01
E
EE-02
E
EE-03
E
EE-04
E
EE-06
E
EE-08
IE-02
IE-04
IE-05
IE-06
IE-07
IE-08
IE-10
IE-11
The Availability Of Shalee As A Poteential Of Mass Movemeent For Idenntifying Thee
A Evaluation In A Connstruction, Case
C
Study: Meteseh,
M
Sem
marang.
Coonsideration And
Widiastuti Nur Farida, Ghu
ufran Helmi Aziz,
A
F.X. An
njar Trilaksoono
To Increase Thhe Damping On
O Passive Control
C
Device By Usingg Asphalt Maaterial
Da
aniel Christiaanto, Yuskar Lase
Impplementationn Of Viscosity Measurement On Plaastic And Viscous
V
Liquuid State Forr
Mu
udflow Case
Budijanto Widjjaja, Shannon
n Hsien-Henng Lee
A High
H
Dynam
mic Mobile Knowledge
K
Worker: Preeliminary Inssight To Thee Impact Off
The Smartphonne On Travell Behavior.
oriani Novitaa C., Ofyar Z.
Z Tamin, Idw
wan Santoso,, Miming Miiharja
Glo
The Influence of Aspect Ratio of Loocal Fibers on Flexural Properties of Reactivee
wder Concreete
Pow
Widodo Kusharrtomo, Suparrtono, Cindyy Angela
Funnding And Financing
F
Regional Road Maintenancce In Indonessia
Tioopan Henry M Gultom, Ofyar
O
Z Tamiin, Pradono, Ade Sjafrudddin
Perrformance Evvaluation of Zigbee Protoocol Using Simulink
S
Lyd
dia Sari, Theeresia Ghoza
ali
The role of the Indonesian universities
u
i New & Reenewable En
in
nergy
W
Rohani Jahja Widodo
Coomparative Analysis
A
Metthod For Enhhancing Thee Quality Im
mage Grayscaale Bayesian
n
Meethod Of Leaast Square Method
M
Gausssian Scale Mixtures And Wiener
Naanniek Andiyaani, Ainil Syaafitri, Bekti Yulianti,
Y
Yohhannes Dewaanto
Ho
ome Securityy Integrated System
S
By Using
U
A Shorrt Message (S
SMS) On Moobile Phoness
Using Microcontroller Atm
mega 8535
Tobbias, Bambaang Widodo, Yohannes Dewanto
Tellemetry Systtem Design On
O Payload Using
U
Flymaaple with AR
RM Cortex-M
M3
Izzah F. Akmalliah, Imam S Nugroho, Anndriani
Fouur Kinds of Testing
T
in Mobile
M
Appliccation "Diabeetes Risk Appplication (D
DBRA)"
Anindito Yoga Pratama,
P
Deewi Agushintta R., Remi Senjaya
S
An
nalysis Of Effect Of Body Mass Inddex (BMI) And
A Surfacee Area Of The
T Heel On
n
Fem
male Prospecctive Employyee During Walking
W
Andrijanto, Rirrin Nalurita
Disstance Estim
mation Withinn Peri-Personnal Space In Real And Viirtual Enviroonment
Din
no Caesaronn, Chiuhsiang
g Joe Lin
Silvver Meal Annd Part Period Algorithm
m In Producin
ng Minimum Lot Sizing Cost
C
Heendy Tannadyy
Inn
novation: Innnovative, Saafe, And Errgonomicallyy Suitable Tool
T
For Acctive Elderly
y
Peo
ople To Clim
mb Stairs.
Ard
dian Domingggo W., Vicario Reinaldoo, I Gusti Aguung Gede S., Fajar Wism
ma P.
Deecision Suppoort Tool For Job Shop Sccheduling Wiith Job Canccellation
Mu
uchamad Okttaviandri, Addnan Hassann, Awaluddin
n Mohd. Shah
haroun
An
nalysis of Appplication Loow Cost Auttomachine on Product Type Switch A8L on PT..
Om
mron Manufaacturing of Inndonesia
Silvvi Ariyanti, Ruly
R
Urbban Engineeering: Urbann Search Andd Rescue (U
USAR) Withiin Emergenccy Responsee
Sysstems In Connfined Spacee Rescue Using Serpentinne Robot
Khristian Edi Nugroho
N
Soebandrija, Sof
ofyan, Andre M.R. Wajongg, Meilani
Airrport Of Thee Future, Grreen Airportt And Aerottropolis: Induustrial Enginneering Andd
Arcchitecture Enngineering Perspective
P
Khristian Edi Nugroho
N
Soebandrija
Internation
nal Conferen
nce on Engineering of Tarumanagaraa (ICET 2013))
F
Faculty of En
ngineering, Tarumanagara University,,
onesia, 2‐3 O
October 2013
3
Jakarta‐Indo
IE-12
IE-13
IE-14
IE-15
IE-16
IE-17
IE-19
IE-21
IE-22
IE-23
IE-24
M
ME-01
M
ME-07
M
ME-10
M
ME-11
M
ME-12
M
ME-13
M
ME-16
M
ME-17
Ind
dustrial Engiineering And
d The Perspeectives On Leadership,
L
Performance,
P
, Innovation,,
Coompetitive Addvantage An
nd Sustainablle Competitivve Advantagge
Khristian Edi Nugroho
N
Soebandrija
Fraamework Deesign for Standard
S
Opperating Proocedures (SO
OP) Implem
mentation off
Cuultivation Andd Post-Harveest In Clusterr Biopharmaaca Karangan
nyar.
Noovita Hadininngrum, Retnoo Wulan Dam
mayanti, Fakkhrina Fahmaa
Tim
me Motion Study
S
at Packking Cable Work
W
Station,, Case Study at PT. X
I Wayan
W
Sukannia, Handika
Deesigning Queestionnaire for
f Empiricaal Study on Relationship
p Between TQM,
T
TPM,,
andd KM
Wilson Kosasihh
Mo
odel Developpment of Shhifting Bottleneck Heuriistik to Solv
ve Job Shopp Scheduling
g
Pro
oblem With Parallel
P
Macchines
Johhan Oscar Ong,
O
Imam Maulana
M
Traansformer Oil Insulation Analysis Baased On Breaakdown Volttage Testing At PT. PLN
N
(PE
ERSERO) Seervice And Production
P
Seemarang
Mo
ohammad Aggung Saryatm
mo
Using Augmennted Reality to
t Enhance Art
A Exhibitioon at Binus Innternational
Rayymond Bahaana, Bayu Prrakoso Dirgaantoro
Erggonomics Analysis
A
Thhe Porters Complaintts Against The Occuurrence Off
Mu
usculoskeletaal Disorders (MSDs) Using The Niossh Lifting Eqquation And PEI
P
Boyy Nurtjahyo M., Erlinda Muslim, Krissna Anga Ra
amadha, Deb
brina Puspitaarini
Recommendatiion Of Unlo
oading Proceess Equipmeent In Raw Material Sttore Of Fastt
Mo
oving Consum
mer Goods Plant
P
With V
Virtual Humaan Modeling Methodologgy
Erllinda Muslim
m, Boy Nurtjjahyo M., Heerman Adriann, Viky Muruuatut
Deesigning Ergoonomic Pack
kaging Line W
Workstation With Simulaation Methodds
Ma
aya Arlini Puuspasari, Erllinda Muslim
m, Feronika, Atiqah
A
Zulfa
a Nadia
Lin
ne Assemblyy Analysis For
F R-223 Product
P
By Kilbridge-W
K
Wester Heurisstic Method,,
Heelgeson-Birniie Method And
A Moodie Y
Young Methood At PT. Mulia
M
Knittingg Factory
Linna Gozali, Siilvi Ariyanti, Elizabeth Maria
M
Elaastic Normal Contact Of A Rough Suurface With Interaction
I
Between
B
Aspeerities Using
g
Elaastic Halfspaace Theory
Ruggerri Toni Liong
Sam
mpling Tools Product Deesign Processs On Pre Heaater Process In Cement Production
P
Ed
di Sutoyo, Yohhanes Dewannto, Agri Suw
wandi
Sollarcell Desiggn Inverter To Supply Thhe Load At 50
0 W, 50 Hz
Syaahrul Alamsyyah, I.A. Darryanto D., Munnik
M
H., Yoohannes Dew
wanto
Neew And Reneewable Energgy By Using Magnets Too Generate Ellectricity
Dzulfi S. Priharrtanto, Suharlan, Gede Eka
E Lesmana
a, Yohannes Dewanto
D
Mo
odel Of Chharge Carrieer Rocket Launcher On
O Research
h Measurinng Pressure,,
Tem
mperature, And
A Humiditty
Mo
ochammad Illham Attharikk, Ahmad Hiidayat Furqoon, Pinardi, Eko
E
The Use Of Raamie Fiber In
n HDPE Matrrix Composite In The Reehabilitation Of Scoliosiss
Pattients
Liees Banowati, Bambang Kismono
K
Haddi
The Effects An
A Environm
ment Can Cause
C
On Low
L
Alloy Steel at A Variety off
mperatures
Tem
Erw
win Siahaan
Efffect Of Diffferent Bend-Twist Coupling Topolog
gies on Indu
uced Twist and Cost off
Wiind Turbine Adaptive
A
Blaades
Rahul Bagali, Hui
H Zhang, Alireza
A
Maheeri
Internation
nal Conferen
nce on Engineering of Tarumanagaraa (ICET 2013))
F
Faculty of En
ngineering, Tarumanagara University,,
onesia, 2‐3 O
October 2013
3
Jakarta‐Indo
M
ME-18
M
ME-19
M
ME-22
M
ME-24
M
ME-26
M
ME-27
M
ME-29
M
ME-30
M
ME-32
M
ME-33
M
ME-34
U
UE-01
U
UE-02
U
UE-03
Up
pdated Cost Modeling
M
Off Hybrid Rennewable Enerrgy System Components
C
Fadi Kahwash, Alireza Mahheri
A Genetic
G
Algoorithm For Optimal
O
Distrribution Of Aerofoils
A
On Wind Turbiine Blades
Fadi Kahwash, Alireza Mahheri
Exppert System
m Application In Designn Automatioon For Threee Degree Of
O Freedom
m
Veertical CNC Milling
M
Machhine
Ag
gus Halim, Diidi Widya Uttama, Jemmyy Septiawan
Efffect of Rake Angle in th
he Turning Process
P
on th
he Surface Roughness
R
off Workpiecee
AIS
SI 4340 Steeel
Sob
bron Lubis, Rosehan,
R
Deenny Handokko
Joiint Propertiess Of Frictionn Stir Weldeed 6063 t3 Aluminum
A
A
Alloys
With Variation
V
Off
Preeheat Methodd
Yusstiasih Purw
waningrum, Medilla
M
Kusrriyanto, Lulu Supriyanto
Expperimental Study
S
Characcterization Buurner Gas Fllame Bioethaanol Sago Reesidual
I Made
M
Kartikaa Dhiputra, Numberi
N
Johni Jonatan
Deesign Of Fifoo Pick And Deposit
D
Systeem
Ricchard Jonathhan Salli, Ag
gustinus Purnna Irawan, Danardono
D
A.S.
Rey
ynolds Num
mbers Effectss On Velocitty Distributioon In Combu
ustion Cham
mber Inlet Off
A Proto
P
X-2 Biioenergy Miccro Gas Turbbine
Steeven Darmaw
wan, Ahmad Indra Siswanntara, Budiaarso
Coooling Effect of Capillary
y Tube for Reefrigerator
Ha
arto Tanujayaa
Enhhancing the Perfomance of Corruggated Panelss Under Blaast Loading: Numericall
An
nalysis
Christian Wijayya, Johan Osscar Ong
Energy Efficiennt Cold Storrage As Hybbrid Refrigeraation Machinne Using Heeating Effectt
om Condenseer With Hyddrocarbon Reefrigerant Subbstituted Forr R-22
Fro
Azrridjal Aziz, Herisiswanto
H
o, Afdhal Kurrniawan Maiinil
To Promote Jakkarta City ass one of an excited Touurist Destination in Asia towards thee
Asian Economiic Communitty (AEC)
Priiyendiswara
Inn
novative Usee Wood And
d Bamboo Use
U As Ren
newable Finiishing Materrials In Thee
Buuilding Application
Syllvie Wirawatti
Aft
fter 25 Yearrs of New Town
T
Development in Jakarta
J
Metrropolitan Arrea (JMA) Pro
ofile and Traansformation
Lioong Ju Tjungg, Suryono Herlambang,
H
I
Indah
Susiloowati, Regina
a Suryadjaja
Internation
nal Conferen
nce on Engineering of Tarumanagaraa (ICET 2013))
F
Faculty of En
ngineering, Tarumanagara University,,
onesia, 2‐3 O
October 2013
3
Jakarta‐Indo
Paralllel Session Schedule
Day/Date
Timee
W
Wednesday
2 October
O
20133
13.00-155.00
13.00-155.00
13.00-155.00
13.00-155.00
15.00-155.30
15.30-177.30
15.30-177.30
15.30-177.30
15.30-177.30
Thursday
3 October
O
20133
09.00-122.00
09.00-122.00
09.00-122.00
09.00-122.00
m
Room
No
1
2
3
4
Paper ID
D
1
2
3
4
AE-01, AE-05,
A
AE-006, CE-06, CE-19
IE-02, IE
E-04, IE-05, IE-06,
I
IE-07
7
IE-19, IE
E-21, IE-22, IE-23,
I
ME-007
ME-10, ME-11,
M
ME--18, ME-27, ME-34
Coffee Brreak
CE-07, CE-09,
C
CE-11, CE-14, CE
E-18, CE-21
EE-01, EE-02,
E
EE-03
3, EE-04, EE
E-06, EE-08
IE-10, IE
E-11, IE-12, IE-13,
I
IE-16
6, IE-19
ME-12, ME-13,
M
ME--17, ME-19, ME-26, ME-33
1
2
3
4
AE-02, AE-04,
A
AE-007, AE-08, AE-09,
A
AE-122, AE-14
AE-13, AE-15,
A
CE-003, CE-16, CE
E-20
ME-01, ME-16,
M
ME--22, M-24, M-29,
M
M-30, M-32
M
IE-08, IE
E-14, IE 15, IE-17,
I
IE-24, UE-01, UE
E-02, UE-03
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
ANALYSIS OF EFFECT OF BODY MASS INDEX (BMI)
AND SURFACE AREA OF THE HEEL
ON FEMALE PROSPECTIVE EMPLOYEE DURING WALKING
Andrijanto1), Ririn Nalurita2
1)
2)
Maranatha Christian University, Jl. Prof. drg. Surya Sumantri No. 65, Bandung 40164, Indonesia
Maranatha Christian University, Jl. Prof. drg. Surya Sumantri No. 65, Bandung 40164, Indonesia
e-mail: anto.andry@yahoo.co.id
Abstract
Good appearance is needed to give a good impression. The professionalism of company sometimes is
measured subjectively by the appearance of employee. Female employee wears a shoe with heel to give more
confidence on her appearance. It is not easy for female prospective employee to walk with that kind of shoe.
Generally they are first graduate and occasionally wearing a shoe with heel in their activity. The purpose of
research is to find an ideal shoe for female prospective employee. Black box method is used in this research.
Four models of shoe are wornalternatelyby 2 groups of BMI(16.0-18.5, 18.6-21.0). The effects aredelta heart
pulse (kdj) and travel time (wt), 72 objects are measured during walking. The result is tested by3 ways
ANOVA andthe effect is discussed.T test is used to find the ideal shoe.
Keywords: Female Shoe, Walking, Physiology, Ergonomic
INTRODUCTION
Generally university student choose a casual shoe or sport shoeduring activities
in campus. Occasionally they are wearing a formal shoe for attending seminar or doing
a presentation. In transition from student to be professional employee, male student do
not have any problem with the formalshoe, but female student have to be wonted
wearing a heel shoe for supporting their appearance.
The moving activities of female employeein the office will be done in 3 ways,
there are a walkingstraight, upstairs, and downstairs[1]. The ideal heel height is 2cm[1].
The purpose of this research is to find an ideal shoe for female prospective employee.
The ideal shoe considers a shoe model and heel surface area instead of random
model[1]. First model,foot is covered by shoe and2nd model, under ankle and heel is
open can be tighten by belt.Two kinds of heel surface area are 1.8 cm2 and 7.5 cm2,
and the available sizes are37 and 38 (European size) can be selected by student. Table
1.1 shows the combinations of model, heel area, and heel height.In this research body
height is considered instead of body weight only[1] then body mass index (BMI) is used.
Table 1 Shoe model, heel area, and heel height
Model
1
2
Heel Area
(cm2)
1.8
7.5
1.8
7.5
Heel height
(cm)
2
2
2
2
Code
1.1
1.3
2.1
2.3
MATERIALS AND METHOD
Seventy two students at semester 7 of 8 are measured. They are divided by 2
groups of body mass index (BMI), first group at range 16.0 – 18.5 (under weight,
IOTF, WHO 2000) and second group at range 18.6 – 21.0 (normal, IOTF, WHO
IE-02 | 1
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
2000). The measurement is done when they are doing the activities, bare foot and
wearing 4 models of shoe respectively.Walking straight would be walking 30 m
straight. Upstairs and downstairs would be walking up and down 2 floors (21 steps
each floor), with 17 cm step height and 29 cm step depth. Scenarios of measurement
can be seen at figure1and figure 2.
Figure 1 Walking straight scenario
Figure 2 Upstairs – downstairs scenario
The heart pulse during activities is obtained by measuring pulse before and
after activity. Wrist pulse meter is used to get the data. The travel time in second (wt)
is measured by using stopwatch. The normality is done for both data by using
Goodness of fit test with 95% confidence and 5% accuracy. Delta heart pulse (kdj) is
obtained by subtract working pulse and rest pulse. Kdj describes the increasing of
heart pulse after doing an activity, figure 3 shows that condition.
IE-02 | 2
International Conference on Engineering of Tarumanagara (ICET 2013)
Faculty of Engineering, Tarumanagara University, Jakarta-Indonesia, 2-3 October 2013
ISBN: 978-979-99723-9-2
Figure 3 Heart pulse pattern
The effect of BMI, shoe model, and heel area on wt and kdj will be tested by using
3-way ANOVA for 3 activities. The test is done by using SPSS ver.11.5 statistic software.
The result will be discussed and the ideal model is obtained by using T-test.
RESULTS AND DISCUSSION
Three-way ANOVA test has been done, the result can be seen on table 2.
Dependent will give an influence on independent when the significant value