Redefinition of GetCapabilities response document element

All Fields marked with * are mandatory.
Change Request 52
#:
Assigned OGC 10-153
Document #:
Name: *Lorenzo Bigagli
Organization: *IMAA-CNR
Email: *lorenzo.bigagli@cnr.it
Document
Name/Version:

*CSW-ebRIM Registry Service - Part 1: ebRIM profile of CSW / 1.0.1

OGC Project
Document:

*07-110r4

If this is a revision of a previous submission and you have a Change Request Number, then check here:
Enter the CR number here:
Enter the Revsion Number that you are revising here:

Title:
Source:

*Redefinition of GetCapabilities response document element
*Lorenzo Bigagli

Work item code:

Category:

* F (Critical correction)

Reason for *
change:

GetCapabilities response element is mandated to
"Capabilities" in the
"http://www.opengis.net/cat/wrs/1.0" namespace.
This is in contrast with the baseline specification, where the

namespace is set to "http://www.opengis.net/cat/csw/2.0.2".
Clients unaware/unsupportive of the ebRIM AP cannot handle the
response type

Summary of *
change:

Allow for a mechanism of selecting between the baseline and the ebRIM
AP response type.
Overloading the mandatory "service" parameter is assumed in
the EO EP, as follows (the following paragraph should be added to

§8.2 of 07-110r4).
The value of the mandatory "service" parameter may be 'CSW'
or 'CSW-ebRIM'. In the former case, the server should respond as
defined in the baseline CSW specification. In the latter case, the
server should respond as defined in the following section.

Consequences if Interoperability issue between ebRIM AP compliant services and generic CSW clients
not approved:

Clauses affected: *
§8.2

Additional 06-131r6_EO_Products_Extension_Package_for_ebRIM_(v0.2.5) contains the same paragraph (see
Documents §9.2.1.1)
affected:
Supporting
Documentation:
Comments:
Status:

Assigned To:

Disposition:

Assigned

ebRIM AP of CSW

Referred and Posted