Perancangan Perbaikan Metode Kerja dan Alat Bantu pada Stasiun Kerja Pengepakan di CV. Bukitraya Laendrys - Bukittinggi Sumatera Barat
Universitas Sumatera Utara
DAFTAR PUSTAKA
Arikunto, Suharsimi. Prosedur Penelitian. Jakarta: PT. Rineka Cipta. 2006.
David, G. C. Ergonomic Methods for Assessing Exposure to Risk Factors for WorkRelated
Musculoskeletal
Disorders.
Occupational
Medicine
Journal
2005;55:190–199
Franklin, Derrick, dkk. Investigation of Ergonomic Improvements for Manual
Material Handling of Heavy Awkward Loads on a Loading Dock : Journal’s
University of Utah. 2008
Freivalds, Andris. Niebel’s Methods, Standards, and Work Design, Twelfth Edition.
New York: McGraw-hill. 2003.
Health and Safety Executive. Further Development of the Usability and Validity of the
Quick Exposure Check (QEC) : University of Surrey. 2005
Kudryk, Ian. A Biomechanical Analysis of A Specialized Load Carriage Technique
and the Development of An Assistive Load Carriage Device. Kanada : Queen’s
University. 2008
Li, G. and Buckle, P. 1998. The Development of a Practical Method for the Exposure
Assessment of Risks to Work-Related Musculoskeletal Disorders. HSE Books.
Suffolk
(http://www.hse.gov.uk/research/content/crr/1999/crr99251.htm)
Li, G. and Buckle, P. Quick Exposure Checklist (QEC) for the Assessment of
Workplace Risks for Work-Related Musculoskeletal Disorders (WMSDs). In :
Stanton, N., Hedge, A., Brookhuis, K., Salas, E. and Hendrick, H. editors.
Handbook of Human Factors and Ergonomics Methods. USA : CRC PRESS.
p. 6.1-6.10. 2005.
Mirmohamadi, J Nasl Seraji. Evaluation of Risk Factors Causing Musculoskeletal
Disorders Using QEC Method in a Furniture Producing Unite : Journal of
Iranian J Publ Health, Vol. 33, No. 2, pp.24-27, 2004
Universitas Sumatera Utara
Muslimah, Etika. Analisis Manual Material Handling Menggunakan Niosh Equation.
Jurnal Ilmiah Teknik Industri : Vol. 5 No. 2. Universitas Muhammadiyah
Surakarta. 2006
Wijana, Nyoman. Teaching and Learning Science through Ergonomic Approach
Reduces Musculoskeletal Complaint, Boredom, Fatigue, and Increases
Motivation and Achievement of Learning among Elementary School Students
No. 1 Sangsit Sawan District Buleleng Regency. Medical Science. Jurnal
Ergonomi : Udayana University. 2007
Purnomo, Hari. Work System Using Total Ergonomic Approach Reduces
Musculoskeletal Complaint, Fatigue, Workload, And Increases The Workers
Productivity Of Ceramic Industry In Kasongan, Bantul. Medical Science.
Jurnal Ergonomi : Udayana University. 2007
Sinulingga, Sukaria. Metode Penelitian. Medan: USU Press. 2011.
Sanders, M.S.; McCormick, E.J. Human Faktors in Engineering and Design. New
York: McGraw-hill. 1987.
Santoso, Gempur. Ergonomi Manusia, Peralatan dan Lingkungan. Surabaya: PT.
Guna Widya. 2004.
Sastrowinoto, Suyatno. Meningkatkan Produktivitas dengan Ergonomi. Jakarta: PT.
Pustaka Binaman Pressindo. 1985.
Suma’mur, P.K. Keselamatan Kerja dan Pencegahan Kecelakaan. Jakarta: CV.
Masagung. 1984.
Sutalaksana, I.Z, dkk. Teknik Tata Cara Kerja. Bandung: ITB. 1979.
Tarwaka, Solichul, dkk. Ergonomi untuk Keselamatan, Kesehatan Kerja dan
Produktivitas. Denpasar: Universitas Udayana. 2004.
Wignjosoebroto, Sritomo. Ergonomi, Studi Gerakan dan Waktu. Surabaya: PT Guna
Widya. 1995.
Universitas Sumatera Utara
Worths, Butter. Applied Ergonomi Handbook. London: Loughborough University of
Technology. 1989.
Woods, P Buckle, dkk. Development of the Quick Exposure Check (QEC) : Robens
Centre for Health Ergonomics, EIHMS, University of Surrey. Guildford, GU2
7TE UK
Universitas Sumatera Utara
DAFTAR PUSTAKA
Arikunto, Suharsimi. Prosedur Penelitian. Jakarta: PT. Rineka Cipta. 2006.
David, G. C. Ergonomic Methods for Assessing Exposure to Risk Factors for WorkRelated
Musculoskeletal
Disorders.
Occupational
Medicine
Journal
2005;55:190–199
Franklin, Derrick, dkk. Investigation of Ergonomic Improvements for Manual
Material Handling of Heavy Awkward Loads on a Loading Dock : Journal’s
University of Utah. 2008
Freivalds, Andris. Niebel’s Methods, Standards, and Work Design, Twelfth Edition.
New York: McGraw-hill. 2003.
Health and Safety Executive. Further Development of the Usability and Validity of the
Quick Exposure Check (QEC) : University of Surrey. 2005
Kudryk, Ian. A Biomechanical Analysis of A Specialized Load Carriage Technique
and the Development of An Assistive Load Carriage Device. Kanada : Queen’s
University. 2008
Li, G. and Buckle, P. 1998. The Development of a Practical Method for the Exposure
Assessment of Risks to Work-Related Musculoskeletal Disorders. HSE Books.
Suffolk
(http://www.hse.gov.uk/research/content/crr/1999/crr99251.htm)
Li, G. and Buckle, P. Quick Exposure Checklist (QEC) for the Assessment of
Workplace Risks for Work-Related Musculoskeletal Disorders (WMSDs). In :
Stanton, N., Hedge, A., Brookhuis, K., Salas, E. and Hendrick, H. editors.
Handbook of Human Factors and Ergonomics Methods. USA : CRC PRESS.
p. 6.1-6.10. 2005.
Mirmohamadi, J Nasl Seraji. Evaluation of Risk Factors Causing Musculoskeletal
Disorders Using QEC Method in a Furniture Producing Unite : Journal of
Iranian J Publ Health, Vol. 33, No. 2, pp.24-27, 2004
Universitas Sumatera Utara
Muslimah, Etika. Analisis Manual Material Handling Menggunakan Niosh Equation.
Jurnal Ilmiah Teknik Industri : Vol. 5 No. 2. Universitas Muhammadiyah
Surakarta. 2006
Wijana, Nyoman. Teaching and Learning Science through Ergonomic Approach
Reduces Musculoskeletal Complaint, Boredom, Fatigue, and Increases
Motivation and Achievement of Learning among Elementary School Students
No. 1 Sangsit Sawan District Buleleng Regency. Medical Science. Jurnal
Ergonomi : Udayana University. 2007
Purnomo, Hari. Work System Using Total Ergonomic Approach Reduces
Musculoskeletal Complaint, Fatigue, Workload, And Increases The Workers
Productivity Of Ceramic Industry In Kasongan, Bantul. Medical Science.
Jurnal Ergonomi : Udayana University. 2007
Sinulingga, Sukaria. Metode Penelitian. Medan: USU Press. 2011.
Sanders, M.S.; McCormick, E.J. Human Faktors in Engineering and Design. New
York: McGraw-hill. 1987.
Santoso, Gempur. Ergonomi Manusia, Peralatan dan Lingkungan. Surabaya: PT.
Guna Widya. 2004.
Sastrowinoto, Suyatno. Meningkatkan Produktivitas dengan Ergonomi. Jakarta: PT.
Pustaka Binaman Pressindo. 1985.
Suma’mur, P.K. Keselamatan Kerja dan Pencegahan Kecelakaan. Jakarta: CV.
Masagung. 1984.
Sutalaksana, I.Z, dkk. Teknik Tata Cara Kerja. Bandung: ITB. 1979.
Tarwaka, Solichul, dkk. Ergonomi untuk Keselamatan, Kesehatan Kerja dan
Produktivitas. Denpasar: Universitas Udayana. 2004.
Wignjosoebroto, Sritomo. Ergonomi, Studi Gerakan dan Waktu. Surabaya: PT Guna
Widya. 1995.
Universitas Sumatera Utara
Worths, Butter. Applied Ergonomi Handbook. London: Loughborough University of
Technology. 1989.
Woods, P Buckle, dkk. Development of the Quick Exposure Check (QEC) : Robens
Centre for Health Ergonomics, EIHMS, University of Surrey. Guildford, GU2
7TE UK
Universitas Sumatera Utara