How to install ARCHIDEC 3D wall panels

How to install ARCHIDEC 3D wall panels
1， The Wall must be smooth prior to fix plywood panel.
2， 5mm or 9mm thickness of plywood panel should be fixed on the wall

before fix ARCHIDEC 3D wall panels

3， After fixed the plywood panel on the wall, brush latex glue on the back of

the wave panel evenly, then stick it to the plywood.
4， use the air gun with headless trunk- nails to shoot the four edges of the

3d wall panelsl to fix it

Edge
panels

5, prepare

of

3D

primer filler or ash- powder to fill the joint gap between fixed

panels , sand it after dry, then paint the color.
Any Question: sales@wallpaneldesigns. com
Or Call: +86 20 82561980