11. H-base -PASS-, with 5 fixing points
2 pcs
H-base for rods 5 to 15 mm diam., 5 clamping positions, weight approx. 1.4 kg
12. Support rod, stainless steel, 1000 mm 2
pcs Polished and massive; length 1000 mm, diameter 12 mm.
13. Support rod, stainless steel, 750 mm
2 pcs
Polished and massive; length 750 mm, diameter 12 mm.
14. Support rod, stainless steel, l = 250 mm, d = 10 mm 1
pcs Polished and massive; length 250 mm, diameter 10 mm.
15. Retort stand, 210 mm × 130 mm, h = 500 mm
1 pcs
16. Right angle clamp 14
pcs
17. Universal clamp 12
pcs particularly suited to hold thin pipes and rods; round gripping
clamping jaws with cork lining. Clamping range: 0...80 mm
Total length: 230 mm Rod diameter: 10 mm
18. Bubble tray column, model, with 2 trays 1
pcs Made of DURAN® glass. For the demonstration of fractionating
countercurrent distillation. The tube of the column has two bubble trays. The overflow from them flows back down inside for a better separation
effect. Two upward pointing side arms with GL 188 threaded connectors for holding thermometers and two downward pointing delivery tubes
controlled by valve-type taps with Teflon spindles. Tube of 12 mm outer diameter at the bottom, GL 2512 threaded connector at the top.
19. Round bottom flask, 250 ml, 2-neck, GL2512, GL188
1 pcs
20.Connecting tube,IGJ 1926-GL2512 1
pcs IGJ 1926 to 12 mm o.d. glass tube.
21.Column head,w. stopcock, NS19
1 pcs
NS1926 ground glass socket and cone to connect to column and a condenser Gl188 srew cap adaptor to insert thermometer
Valve type tap with Teflon spindle to remove small condensate samples
22. Condenser,Dimroth,IGJ1926,210mm 1
pcs
23. Glass tubes,l.250 mm, pkg.of 10
1 pcs
24. Kühlmantel, GL 258
1 pcs
Made of DURAN® glass; GL 258, outer diameter 20 mm, overall length 200 mm. Two hose connections. For use as a condensor jacket fitted over a glass tube
or the side arm of a distillation flask.
25. Separating funnel,50ml,GL18 1
pcs
26. Connecting caps,10 pcs, GL18
1 pcs
27. Gasket for GL18, 8mm hole, 10 pcs
1 pcs
28. Teflon sleeve IGJ 19, 10 pcs 1
pcs
29. Clamp f.ground joint,plastic,NS19 2
pcs
30. Control unit gas chromatograph
1 pcs
For voltage supply and for equalisation of the measure probe for gas chromatograph
• Zero balance: Push button for rough balance, potentiometer for fine balance • Input: BNC sockets for probe
• Output: 4-mm sockets for display device e.g. interface • Dimensions mm: 225 × 113 × 125
• Voltage supply: 110...230 VAC
31. Mesure probe for gas chromatograph, BNC contact 1