- integrated support for 3 different methods to record titrations manual reagent addition, registration of reagent volume by
drop counter, remote control of an automatic motor piston burette - innumerable integrated analysis and display possibilities:
automatic estimation of equivalence point with or without calculation of pKa-values, mean values, integrals and differentials of curves, curve
fitting, smoothing of curves, and many more - export function to any other WINDOWS application
- free updates of the software by internet
5. Temp. probe, imm. type, Pt1000, Cobra3 1
pcs
6. Immers. probe NiCr-Ni, teflon, 200°C
3 pcs
NiCr-Ni thermocouples with 2 pin standard flat plug Type K, free of thermal tension. Suitable for e.g. Digital Thermometer Hand-held measuring
device Temperature or interfaces. Technical data:
Temperature range: - 50…+ 300 °C Response time: approx. 10 s
Length of lead: 150 cm Dimensions of the probe
Diameter: 7 mm Length: 250 mm
7. Protective sleeves f.temp.probe,2 1
pcs
8. Heating mantle for roundbottom flask, 250 ml, 230 V,
1 pcs
with saftey switch Heating mantle for round bottom flasks with a heating element which is laid out for a temperature up to a maximum of
450°C. The heating mantle is built-in into a plastic-coated metal case and lined with woven glass fiber cloth inside. The case is to the outside
thermally insulated against loss of heat and protection-grounded. At the back two tapped holes are made in order to be able to attach a tripod accessories.
The current supply occurs via a 1.5 m long power cable with earthed plug and a heating zone . A personal security adapter which is stipulated to the is
enclosed in the scope of delivery. The heating mantle has two heating zones and a maximum power consumption of 150 W.
9.Clamp for heating mantle 1
pcs
10. Power regulator
1 pcs
electronic AC power controller for stageless power control of heating devices, ovens, heating mantles, water bathes etc.
Adjustment range: 0, 20 to 75 and 100 Operating Voltage: 230 Volt - 5060 Hz
Consumer Connection: Schuko power outlet power connector Switching power max. 3450 W ohmsche load
Dimensions LxBxHmm: 120 x 65 x 55
11. H-base -PASS-, with 5 fixing points
2 pcs
H-base for rods 5 to 15 mm diam., 5 clamping positions, weight approx. 1.4 kg
12. Support rod, stainless steel, 1000 mm 2
pcs Polished and massive; length 1000 mm, diameter 12 mm.
13. Support rod, stainless steel, 750 mm
2 pcs
Polished and massive; length 750 mm, diameter 12 mm.
14. Support rod, stainless steel, l = 250 mm, d = 10 mm 1
pcs Polished and massive; length 250 mm, diameter 10 mm.
15. Retort stand, 210 mm × 130 mm, h = 500 mm
1 pcs
16. Right angle clamp 14
pcs
17. Universal clamp 12
