RESPON TANAMAN KENTANG (Solanum tuberosum L.) TERHADAP IRIGASI TETES DENGAN VOLUME DAN WAKTU APLIKASI YANG BERBEDA

RESPON TANAMAN KENTANG (Solanum tuberosum L.)TERHADAP
IRIGASI TETES DENGAN VOLUME DAN WAKTU APLIKASI YANG
BERBEDA
Oleh: Agustina Wulan Sari ( 03710018 )
agronomy
Dibuat: 2008-03-24 , dengan 3 file(s).

Keywords: Irigasi Tetes, Kentang, Aplikasi, Volume, Waktu
ABSTRAKSI
Penelitian ini bertujuan untuk mengetahui respon tanaman kentang terhadap irigasi tetes dengan
volume dan waktu aplikasi yang berbeda.
Penelitian dilakukan di desa Sapikerep, Kecamatan Sukapura, Kabupaten Probolinggo (± 1700 m
dpl) dari bulan Mei sampai Agustus 2007 dengan tipe tanah Andosol.
Metode penelitian ini menggunakan rancangan acak kelompok (RAK) faktorial dengan 2
faktor.dengan faktor yang dicobakan meliputi : Faktor I (Volume pemberian air) yakni: V1
(Volume pemberian air dengan sistem irigasi tetes 50 ml), V2 (Volume pemberian air dengan
sistem irigasi tetes 100 ml), V3 (Volume pemberian air dengan sistem irigasi tetes 150 ml), dan
Faktor II (Waktu Pemberian air): W1 (Waktu pemberian air 30 hari setelah tanam), W2 (Waktu
pemberian air 35 hari setelah tanam), W3 (Waktu pemberian air 40 hari setelah tanam). Dari
faktor-faktor tersebut didapat 9 kombinasi perlakuan, dan masing-masing diulang 3 kali, dan tiap
perlakuan 3 sampel tanaman.

Pengamatan dimulai pada umur 47 HST, dengan interval 7 hari sekali dengan tanaman sample
sebanyak 3 sampel. Pengamatan dilakukan secara non destruktif dan destruktif. Parameter non
destruktif meliputi : tinggi tanaman (cm), jumlah daun, jumlah batang rumpun, luas daun per
tanaman (cm2), dan pengamatan secara dekstruktif meliputi: jumlah umbi per tanaman, bobot
umbi per tanaman (g), bobot tiap umbi (g), serta hasil panen (t/ha)
Hasil penelitian menunjukkan bahwa terjadi interaksi antara volume dan waktu pemberian air
terhadap variabel pertumbuhan dan komponen hasil tanaman kentang. Perlakuan volume 50 ml
dengan waktu pemberian 30 hari setelah tanam dapat meningkatkan pertumbuhan, sedangkan
volume 150 ml dan waktu pemberian 40 hari setelah tanam dapat meningkatkan komponen hasil
dengan kemampuan produksi 18,35 t/ha.

ABSTRACT
The aim of this study is to investigate the response of potato to drip irrigation with volume and
time application that different .
The research was done at Sapikerep, District of Sukapura, Probolinggo (± 1700 m sea above
level) from May through August 2007 which the soil type was Andosol.
The experiment was arranged in a factorial block random design with 2 factor, comprised :
Factor I (Volume of giving water) are V1 (Volume of giving water with drip irrigation 50 ml),
V2 (Volume of giving water with drip irrigation 100 ml), V3 (Volume of giving water with drip


irrigation 150 ml), and Factor II (Time of giving water) are W1 (Giving water at 30 daps), W2
(Giving water at 35 daps), W3 (Giving water at 40 daps). Arranged as much 9 treatment
combination, and repeated 3 times with 3 plants models
The observation started at 47 daps and was repeated on a 7-day interval using 3 model plants.
Non-destructive and destructive observation were made. The first comprised are plants height
(cm), number of leaves and leaf area (cm2), whereas the second comprised are number of tuber
per plant, tuber weight per plant(g), tuber weigth per tuber (g), and total yield (ton/ha).
The result of this experiment shows that there is a significant interaction among the two factors,
and the two factors show effect on growth and yield parameters. Volume 50 ml and time
application at 30 daps can increasing plant growth, while volume 150 ml and time application at
40 daps can increasing potato yield component, with ability of production about 18,35 tons/ha.