Perancangan Alat Pendeteksi Medan Magnet

Hasil Litbang Baristand Industri Surabaya Tahun Anggaran 2008

Perancangan Alat Pendeteksi Medan Magnet pada Peralatan Listrik Rumah Tangga
(The Design of Magnetic Field Detector Tool at Household Electrical Appliances)
Oleh :
Gunawan Sukaca
Abstrak
Setiap peralatan listrik yang dihubungkan ke sumberlistrik, akan memancarkan medan magnet. Kuat medan
magnet tersebut akan berkurang sesuai jarak.
Dengan detector medan magnet Pinout Hall Effect Sensor UGN3503 U dapat mengetahui ada atau tidaknya
medan magnet dalam radius tertentu, sehingga akan dapat dianalisa apakah medan magnet tersebut
mempengaruhi peralatan listrik yang berada di sekitarnya. Dengan demikian unjuk kerja peralatan listrik dapat
berjalan secara optimal. Detektor medan magnet di dalam proyek ini dititikberatkan pada adatidaknya medan
magnet dalam radius sekitar 10 cm. Medan magnet yang dideteksi mempunyai kekuatan medan magnet konstan
atau berubah dengan frekuensi yang tidak terlalu tinggi, sekitar sampai 20 KHz.
Abstract
Any electrical equipment that is connected to a power source, will emit a magnetic field. This magnetic
field strenght will be decreased with the distance.
Using a magnetic field detector Pinout Hall Effect Sensor UGN3503 U, it will be showed whether or not the
magnetic field within a certain radius, so that will be analyzed whether the magnetic field affects
the electrical equipment is located nearby. Thus the performance of electrical equipment can run optimally. The

detector's magnetic field within this project focused on the availability of a magnetic field within a radius
of about 10 cm. The magnetic field strenght that has been detected is constant or transformed with a frequency
that is not too high, up to about 20 KHz.