Pembuatan Nanokomposit Poliuretan Berbasis Minyak Kelapa Sawit Dengan Nanopartikel Montmorillonit Organik Sebagai Bahan Cat
DAFTAR PUSTAKA
Ahmed Rehab, Nehal Salahuddin, 2005,”Nanocomposite materials based on
polyurethane intercalated into montmorillonite clay”, Materials Science and
Enginering A, 368-376.
Backman Ac, Linberg , 2002, Interaction between wood and polyurethane alkyd
lecquer resultig in a decrease in the glass transition temperature, J. Appl.
Polym Sci Part A; Polymerr Chem 36, 391-400
Bharadwaj, R.K. “Structure-Property Relationship in Cross-Linked Poliester-Clay
Nanocomposites”, Avery research Center, 2900 Bradly Street, Pasadena,
CA 91107, USA, 2002.
Bhunia, H.P. Jana R.N. Basak. A. Lenka S and Nando, B. 1998. “Synthesis of
polyurethane from Cashew Nut Shell Liquid (CNSL)”, a Renewable
Resource, Journal of Polymer Science : Part A : Polymer Chemistry 36 :
391-400.
Charu, S.,”Studies on Development of Polypropylene-Clay Nanocomposite for
Automotive, Thesis, School of Physics and Material Science, Thapar
University, India, Applications, 2008.
Cristina Prisacariu, “Polyurethane Elastomers”, 2011, SpringerWien,NewYork.
Dutta,N., Karak,N., Dolui,S.K., 2007,” Stoving paint from Mesua ferrea L.seed
oil based short oil polyester and MF resin blend”, Progress in Organic
Coatings, 58, 40-45
Julinawati, 2012, Karakterisasi dan Pengolahan Bentonit Alam Aceh sebagai
Pengisi Nanokomposit Polipropilena-Montmorillonit,Disertasi Pasca USU
Johannes T.P. Derksen, F. Petrus Cuperus, Peter Kolster. 1995. “Paint and
coatings from Renewable Resources”, Industrial crops and products, 3 :
225-236.
Jie Song, Ashish Batra, Jose M. Rego, Choistoper W. Macosko, 2011,
“Polyethlene/polyurethane blends for improved paint adhesion”, Progress in
Organic Coatings, 72, 492-497.
Cheng HT, 2012, Persoalan Keberlanjutan Kunci dalam Sektor Minyak Kelapa
58
59
Sawit, International Finance Corporation,World Bank Group.
Edwards K.N. (ed) 1981, “Urethane Chemistry and Applications”, pp. 80-114.
American Chemical Society, Washington, D.C. U.S.A.
Fisli, A. Isolasi dan Karakterisasi dari Bentonit Sukabumi (Indonesia), 2008,
Indonesia Journal of Material Sience,10(1), 12-17
Gilman, J.Flammability and Thermal Stability Studies of Polymer Layered
Silicate (Clay) Nanocomposites, Applied Clay Science (1999) 31-49.
Ginting, M, 2010, “Pemanfaatan Hasil Hidrolisis dan Alkoksilasi dengan Gliserol
dari Epoksida Minyak Kemiri sebagai Sumber Poliol untuk Pembuatan
Poliuretan”, Desertasi Doktor, Pascasarjana USU.
Harjono, Purwatiningsih Sugita, Zainal Alim Mas’ud, 2012, “Synthesis and
Application of Jatropha Oil based Polyurethane as Paint Coating Material”,
Makara Journal of Science 16/2,134-140.
Howard, G.T. 2002. “Biodegradation of Polyurethane” : A review, International
Biodeterioration & Diodegradation 49 : 245-252.
Ian Clemitson, 2008, “Castable Polyurethane Elastomers”, CRC Press.
Ketaren. S. 2008, Minyak dabn Lemak Pangan, UI Press
Kishore K. Jena, K.V.S.N. Raju.Ramanuj Narayan, 2012, “Sodium
montmorillonit clay loadedorganic-inorganic hybrid composites: Synthesis
and characterization”, Progress in Organic Coatings 75, 33-37.
Lambourne. R and T A Strevens,1999, “Paint and Surface Coating”,Wood head
Publishing Ltd, ISBN 1 85573 348 X.
Lagaly, G. 1986, “Interaction of alkylamines with different types of layered
compounds”. Solid State Ionics 22 : 43-51.
Latere Dwan’isa, J.P. Mohanty, A.K., Misra, M., Drzal, L.T. and Kazemizadeh,
M. 2004. “Biobased polyurethane and its composite with glass fiber”,
Journal of materials science 39 : 2081-2087.
60
Leandro P, Analice L, Rudinie F, 2009, “Synthesis and characterization of
thermoplastic polyurethane/nanoclay composites”, Material Science and
Engineering C, 29, 474-478.
Lu, Y., Tighzert, L., Dol P and Erre, D. 2005. Preparation and properties of starch
thermoplastics modified with waterborne polyurethane from renewable
resources”, Polymer 46 : 9863-9870.
Lundh. M, Blom.T, Wackelgard. E, “Antireflection treatment of Thickness
Sensitive Spectrally Selective (TSSS) paint for thermal solar absorbers”,
Solar Energy, 2010, 84, 124-129.
Mannari V, Goel A, 2007. “Novel Vagetable Oil-based functional intermediates
for advanced coating system”. Renewable resource and bio refinnery
conference-RRB-III: Belgium.
Matthew,P.W, Wesley.G,Teri.L, Brent.M,”Characterization of chemical agent
transport in paints”, 2013, Journal of Hazardus Materials, 260, 907-913
Meyer P, 2008, “Epoxidation of Soybean Oil and Jatropha”, Thammasat Int Jsc
Tech 13,1-5.
Mihail Ionescu, 2005, “Chemistry and Technologi of Polyol for Polyurethanes”,
Rapra Technologi.
Nayani.M, Gunashekar.S, Nidal.A., “ Synthesis and Characterization of
Polyurethane-Nanoclay Composites”, 2013, Polymer Science, Research
Article, Hindawi.
Nerine, S.S, Kong,X.,Bo, uzidi, L.,and Sporas, P.,2007, “Physical Properties of
Polyurethane Produced from Polyol from Seed Oil”: I.Elastomers,J. Am.
Oil.Chem. Soc. Vol 84, pp 55-63 .
Odetoye T.E, D. S. Ogunniyi, G.A.Olatunji, “Improving Jatropha curcas Linneus
oil alkyd drying properties”, 2012, Progress in Organic Coating,73, 374381.
61
Petrovic, Z.S. and Ferguson, J.2005. “Polyurethane Elastomers”, Progress in
Polymer Science 16 : 695-836.
Petrovic, Z.S; DooPyo, H; Javni, I; Erina, N; Zhang, F;Ilavsky, J. 2013,”Phase
structure in segmented polyurethanes having fatty acid-based soft segment”
Polymer 54, 372-380
Ratana T, “Reinforcement of Natural Rubber Latex by Nanosize Monmorillonite
Clay”, The Pensylvanis State University, 2003.
Ryhei T,Hirose S,2008,”Preparation and Charaterization of polyurethane foams
using a palm oil-based polyol”,Biorsoure Technology 99,3810-3816.
T. Rihayat, M. Saari, M. Hilmi Mahmood, W.M.Z. Wan Yunus, A.R. Suraya, K.
Z. H.Dahlan and S.M. Sapuan, 2007. “Mechanical Characterization of
Polyurethane/Clay Nanocomposites”, Polymers&Polymer Composites, 647652.
Tekmira, www.tekmira.esdm.go.id/data/bentonit
T. Rihayat, M. Saari, A.R. Suraya, M.H. Mahmood, K.Z.H.M Dahlan, W.M.Z.W.
Yunus and S.M. Sapuan, 2006. “Synthesis and Thermal characterization of
polyurethane/clay nanocomposites based on palm oil polyol”, Plasticspolymer Technology and Engineering, 45, no. 12, pp. 1323-1326.
T. E. Odetoye, D. S. Ogunniyi, G.A.Olatunji, “Improving Jatropha curcas
Linneus oil alkyd drying properties”, 2012, Progress in Organic Coating,73,
374-381.
Sandip D. Rajput, Dilip G.Hundiwale, Pramod P. Mahulikar, Vikas V. Gite, 2014,
“Fatty acid based polyurethane films and coating”, Progress in Organic
Coating, 77, 1360-1368.
S. Dutta, N.Karak,T.Jana, 2009,“Evaluation of Mesua ferrea L.seed oil modified
polyurethane paints”, Progress in Organic Coating, 65, 131-135.
Silva Araujo, R.C. and Duarte Pasa, V.M. 2004.“New Eucalyptus tar-derived
polyurethane coatings”. Progress in Organic Coating 51 : 6-14.
Schey, J., 1987.“Introduction to Manufacturing Processes”. Departemen of
Mechanical Engenering, University of Waterloo, Ontario.
62
Sheikhy.H, Shahidzadeh.M, Ramezanzadeh.B, Noroozi.F, “Studying the effects
of chain extenders chemical structures`on the adhesion and mechanical
properties of a polyurethane adhesive”, 2013, Journal of Industrial and
Engineering Chemistry, 19. 1949-1955.
Sipayung,T, 2012,“Ekonomi Agribisnis Minyak Kelapa Sawit”, IPB Press
Sunarko, 2012,“Membangun Kebun Mini Kelapa Sawit”, Agro Media Pustaka,
Jakarta.
Suprakas, S., 2003., “Polimer/layercd silicate nanocomposite: a review from
preparation to processing”, Japan.
Suman,T and N. Karak, 2013,”Castor oil-based hyperbranhed polyurethanes as
advaned surface coating materials”. Progress in Organic Coating 76,157164.
Sudrajat, 2010, Pembuatan Poliol dari Minyak Jarak Pagar sebagai bahan baku
Poliuretan, Pusat Penelitian Hasil Hutan , Bogor, Vol 28, No 3.231-240
Uday K, Manabendra M,N.Karak, 2011,Mesua ferrea L.seed oil based acrylatemodified thermostable and biodegradable highly branched polyester
resin/clay nanoomposite”, Progress in Organic Coatings,72, 676-685.
Uyama, H, Kuwabara, M., Tsujimoto, T., Nakano, M., Usuki, A. And Kobayashi,
S, 2003.” Green nanocomposites from Renewable Resources : Plant oilClay Hybrid Materials”. Chemistry of Materials 15 : 2492-2494.
Wang, S,; Hu T., ; Wang, Z,; Chen,Z; Fan, W. 2002. “Preparation and Thermal
Properties of ABS/Monmorilonite Nanocomposites “, Polymer Degradation
and Stability, 423-426.
Yeganeh, H and Mehdizadeh, M.R. 2004. “Synthesis and properties of isocyanate
curable millable polyurethane elastomers based on castor oil as a renewable
resource polyol”. European Polymer Journal 40 : 1233-1238.
Wijaya, K.,Sugiharto, E., Mudasir, Tahir I., Liawati I.,”Synthesis`of Iron Oxide
Montmorillonit Composite and Study of Its Structural Stability Againts
Sulfuric Acid, Indonesian Journal of Chemistry, 2004, 4(1), 32-42
63
Wirpsza, Z. 1993. “Polyurethanes Chemistry, Technology and Application”. Ellis
Horwood Limited Publisher. Chichester, British.
Wegener, G, Brandt, M. Duda, L., Hofmann, J., Klesczewcki, B., Koch, D.,
Kumpf, R.J., Orzesel, H., Pirkl, H.G., Six, C., Steinlein, C. And Weisbeck,
M. 2001. “Trends in industrial catalysis in the polyurethane industry”.
Applied Catalysis A : General 221 : 303-335.
Wijarnako, A, Abadi, A and Sentosa., 2004, Perancang Awal Pabrik Polyurethane
berbasis Minyak Jarak di Indonesia, J. Teknologi, No. 2, pp.109- 119.
Wirjosentono, B. 1988. “Kenetika dan Mekanisme Polimerisasi”, Edisi Pertama,
USU- Press, Medan.
Werner J. Blank, 1992.”Novel polyurethane polyols for waterborne and high
solids coatings”, Progress in Organic Coatings, 20, 235-259.
Ahmed Rehab, Nehal Salahuddin, 2005,”Nanocomposite materials based on
polyurethane intercalated into montmorillonite clay”, Materials Science and
Enginering A, 368-376.
Backman Ac, Linberg , 2002, Interaction between wood and polyurethane alkyd
lecquer resultig in a decrease in the glass transition temperature, J. Appl.
Polym Sci Part A; Polymerr Chem 36, 391-400
Bharadwaj, R.K. “Structure-Property Relationship in Cross-Linked Poliester-Clay
Nanocomposites”, Avery research Center, 2900 Bradly Street, Pasadena,
CA 91107, USA, 2002.
Bhunia, H.P. Jana R.N. Basak. A. Lenka S and Nando, B. 1998. “Synthesis of
polyurethane from Cashew Nut Shell Liquid (CNSL)”, a Renewable
Resource, Journal of Polymer Science : Part A : Polymer Chemistry 36 :
391-400.
Charu, S.,”Studies on Development of Polypropylene-Clay Nanocomposite for
Automotive, Thesis, School of Physics and Material Science, Thapar
University, India, Applications, 2008.
Cristina Prisacariu, “Polyurethane Elastomers”, 2011, SpringerWien,NewYork.
Dutta,N., Karak,N., Dolui,S.K., 2007,” Stoving paint from Mesua ferrea L.seed
oil based short oil polyester and MF resin blend”, Progress in Organic
Coatings, 58, 40-45
Julinawati, 2012, Karakterisasi dan Pengolahan Bentonit Alam Aceh sebagai
Pengisi Nanokomposit Polipropilena-Montmorillonit,Disertasi Pasca USU
Johannes T.P. Derksen, F. Petrus Cuperus, Peter Kolster. 1995. “Paint and
coatings from Renewable Resources”, Industrial crops and products, 3 :
225-236.
Jie Song, Ashish Batra, Jose M. Rego, Choistoper W. Macosko, 2011,
“Polyethlene/polyurethane blends for improved paint adhesion”, Progress in
Organic Coatings, 72, 492-497.
Cheng HT, 2012, Persoalan Keberlanjutan Kunci dalam Sektor Minyak Kelapa
58
59
Sawit, International Finance Corporation,World Bank Group.
Edwards K.N. (ed) 1981, “Urethane Chemistry and Applications”, pp. 80-114.
American Chemical Society, Washington, D.C. U.S.A.
Fisli, A. Isolasi dan Karakterisasi dari Bentonit Sukabumi (Indonesia), 2008,
Indonesia Journal of Material Sience,10(1), 12-17
Gilman, J.Flammability and Thermal Stability Studies of Polymer Layered
Silicate (Clay) Nanocomposites, Applied Clay Science (1999) 31-49.
Ginting, M, 2010, “Pemanfaatan Hasil Hidrolisis dan Alkoksilasi dengan Gliserol
dari Epoksida Minyak Kemiri sebagai Sumber Poliol untuk Pembuatan
Poliuretan”, Desertasi Doktor, Pascasarjana USU.
Harjono, Purwatiningsih Sugita, Zainal Alim Mas’ud, 2012, “Synthesis and
Application of Jatropha Oil based Polyurethane as Paint Coating Material”,
Makara Journal of Science 16/2,134-140.
Howard, G.T. 2002. “Biodegradation of Polyurethane” : A review, International
Biodeterioration & Diodegradation 49 : 245-252.
Ian Clemitson, 2008, “Castable Polyurethane Elastomers”, CRC Press.
Ketaren. S. 2008, Minyak dabn Lemak Pangan, UI Press
Kishore K. Jena, K.V.S.N. Raju.Ramanuj Narayan, 2012, “Sodium
montmorillonit clay loadedorganic-inorganic hybrid composites: Synthesis
and characterization”, Progress in Organic Coatings 75, 33-37.
Lambourne. R and T A Strevens,1999, “Paint and Surface Coating”,Wood head
Publishing Ltd, ISBN 1 85573 348 X.
Lagaly, G. 1986, “Interaction of alkylamines with different types of layered
compounds”. Solid State Ionics 22 : 43-51.
Latere Dwan’isa, J.P. Mohanty, A.K., Misra, M., Drzal, L.T. and Kazemizadeh,
M. 2004. “Biobased polyurethane and its composite with glass fiber”,
Journal of materials science 39 : 2081-2087.
60
Leandro P, Analice L, Rudinie F, 2009, “Synthesis and characterization of
thermoplastic polyurethane/nanoclay composites”, Material Science and
Engineering C, 29, 474-478.
Lu, Y., Tighzert, L., Dol P and Erre, D. 2005. Preparation and properties of starch
thermoplastics modified with waterborne polyurethane from renewable
resources”, Polymer 46 : 9863-9870.
Lundh. M, Blom.T, Wackelgard. E, “Antireflection treatment of Thickness
Sensitive Spectrally Selective (TSSS) paint for thermal solar absorbers”,
Solar Energy, 2010, 84, 124-129.
Mannari V, Goel A, 2007. “Novel Vagetable Oil-based functional intermediates
for advanced coating system”. Renewable resource and bio refinnery
conference-RRB-III: Belgium.
Matthew,P.W, Wesley.G,Teri.L, Brent.M,”Characterization of chemical agent
transport in paints”, 2013, Journal of Hazardus Materials, 260, 907-913
Meyer P, 2008, “Epoxidation of Soybean Oil and Jatropha”, Thammasat Int Jsc
Tech 13,1-5.
Mihail Ionescu, 2005, “Chemistry and Technologi of Polyol for Polyurethanes”,
Rapra Technologi.
Nayani.M, Gunashekar.S, Nidal.A., “ Synthesis and Characterization of
Polyurethane-Nanoclay Composites”, 2013, Polymer Science, Research
Article, Hindawi.
Nerine, S.S, Kong,X.,Bo, uzidi, L.,and Sporas, P.,2007, “Physical Properties of
Polyurethane Produced from Polyol from Seed Oil”: I.Elastomers,J. Am.
Oil.Chem. Soc. Vol 84, pp 55-63 .
Odetoye T.E, D. S. Ogunniyi, G.A.Olatunji, “Improving Jatropha curcas Linneus
oil alkyd drying properties”, 2012, Progress in Organic Coating,73, 374381.
61
Petrovic, Z.S. and Ferguson, J.2005. “Polyurethane Elastomers”, Progress in
Polymer Science 16 : 695-836.
Petrovic, Z.S; DooPyo, H; Javni, I; Erina, N; Zhang, F;Ilavsky, J. 2013,”Phase
structure in segmented polyurethanes having fatty acid-based soft segment”
Polymer 54, 372-380
Ratana T, “Reinforcement of Natural Rubber Latex by Nanosize Monmorillonite
Clay”, The Pensylvanis State University, 2003.
Ryhei T,Hirose S,2008,”Preparation and Charaterization of polyurethane foams
using a palm oil-based polyol”,Biorsoure Technology 99,3810-3816.
T. Rihayat, M. Saari, M. Hilmi Mahmood, W.M.Z. Wan Yunus, A.R. Suraya, K.
Z. H.Dahlan and S.M. Sapuan, 2007. “Mechanical Characterization of
Polyurethane/Clay Nanocomposites”, Polymers&Polymer Composites, 647652.
Tekmira, www.tekmira.esdm.go.id/data/bentonit
T. Rihayat, M. Saari, A.R. Suraya, M.H. Mahmood, K.Z.H.M Dahlan, W.M.Z.W.
Yunus and S.M. Sapuan, 2006. “Synthesis and Thermal characterization of
polyurethane/clay nanocomposites based on palm oil polyol”, Plasticspolymer Technology and Engineering, 45, no. 12, pp. 1323-1326.
T. E. Odetoye, D. S. Ogunniyi, G.A.Olatunji, “Improving Jatropha curcas
Linneus oil alkyd drying properties”, 2012, Progress in Organic Coating,73,
374-381.
Sandip D. Rajput, Dilip G.Hundiwale, Pramod P. Mahulikar, Vikas V. Gite, 2014,
“Fatty acid based polyurethane films and coating”, Progress in Organic
Coating, 77, 1360-1368.
S. Dutta, N.Karak,T.Jana, 2009,“Evaluation of Mesua ferrea L.seed oil modified
polyurethane paints”, Progress in Organic Coating, 65, 131-135.
Silva Araujo, R.C. and Duarte Pasa, V.M. 2004.“New Eucalyptus tar-derived
polyurethane coatings”. Progress in Organic Coating 51 : 6-14.
Schey, J., 1987.“Introduction to Manufacturing Processes”. Departemen of
Mechanical Engenering, University of Waterloo, Ontario.
62
Sheikhy.H, Shahidzadeh.M, Ramezanzadeh.B, Noroozi.F, “Studying the effects
of chain extenders chemical structures`on the adhesion and mechanical
properties of a polyurethane adhesive”, 2013, Journal of Industrial and
Engineering Chemistry, 19. 1949-1955.
Sipayung,T, 2012,“Ekonomi Agribisnis Minyak Kelapa Sawit”, IPB Press
Sunarko, 2012,“Membangun Kebun Mini Kelapa Sawit”, Agro Media Pustaka,
Jakarta.
Suprakas, S., 2003., “Polimer/layercd silicate nanocomposite: a review from
preparation to processing”, Japan.
Suman,T and N. Karak, 2013,”Castor oil-based hyperbranhed polyurethanes as
advaned surface coating materials”. Progress in Organic Coating 76,157164.
Sudrajat, 2010, Pembuatan Poliol dari Minyak Jarak Pagar sebagai bahan baku
Poliuretan, Pusat Penelitian Hasil Hutan , Bogor, Vol 28, No 3.231-240
Uday K, Manabendra M,N.Karak, 2011,Mesua ferrea L.seed oil based acrylatemodified thermostable and biodegradable highly branched polyester
resin/clay nanoomposite”, Progress in Organic Coatings,72, 676-685.
Uyama, H, Kuwabara, M., Tsujimoto, T., Nakano, M., Usuki, A. And Kobayashi,
S, 2003.” Green nanocomposites from Renewable Resources : Plant oilClay Hybrid Materials”. Chemistry of Materials 15 : 2492-2494.
Wang, S,; Hu T., ; Wang, Z,; Chen,Z; Fan, W. 2002. “Preparation and Thermal
Properties of ABS/Monmorilonite Nanocomposites “, Polymer Degradation
and Stability, 423-426.
Yeganeh, H and Mehdizadeh, M.R. 2004. “Synthesis and properties of isocyanate
curable millable polyurethane elastomers based on castor oil as a renewable
resource polyol”. European Polymer Journal 40 : 1233-1238.
Wijaya, K.,Sugiharto, E., Mudasir, Tahir I., Liawati I.,”Synthesis`of Iron Oxide
Montmorillonit Composite and Study of Its Structural Stability Againts
Sulfuric Acid, Indonesian Journal of Chemistry, 2004, 4(1), 32-42
63
Wirpsza, Z. 1993. “Polyurethanes Chemistry, Technology and Application”. Ellis
Horwood Limited Publisher. Chichester, British.
Wegener, G, Brandt, M. Duda, L., Hofmann, J., Klesczewcki, B., Koch, D.,
Kumpf, R.J., Orzesel, H., Pirkl, H.G., Six, C., Steinlein, C. And Weisbeck,
M. 2001. “Trends in industrial catalysis in the polyurethane industry”.
Applied Catalysis A : General 221 : 303-335.
Wijarnako, A, Abadi, A and Sentosa., 2004, Perancang Awal Pabrik Polyurethane
berbasis Minyak Jarak di Indonesia, J. Teknologi, No. 2, pp.109- 119.
Wirjosentono, B. 1988. “Kenetika dan Mekanisme Polimerisasi”, Edisi Pertama,
USU- Press, Medan.
Werner J. Blank, 1992.”Novel polyurethane polyols for waterborne and high
solids coatings”, Progress in Organic Coatings, 20, 235-259.