SEKOLAH MENENGAH KEJURUAN IT NETWORK SYS (1)
LOMBA KOMPETENSI SISWA 2016
SEKOLAH MENENGAH KEJURUAN
TINGKAT KABUPATEN PESAWARAN
BIDANG LOMBA
IT NETWORK SYSTEM
ADMINISTRATIONS
TEKNIK KOMPUTER & JARINGAN
DINAS PENDIDIKAN DAN KEBUDAYAAN
KABUPATEN PESAWARAN
TAHUN 2016
st
1 DayCompetition
(Part1– Part22)
SECTION1–WORK TASK SERVER AND CLIENT
Part1–PC /LaptopClientSetup
1. Setup PC client or Laptop client using Operating System Windows 7 / 8 Profesional Ensure that all
components are correctly installed.
2. Create 2 formatted partitions as follows:
- C:50% of harddisk capacity using NTFS partition
- D:50% of harddisk capacity using FAT32 partition
3. Install networkcard, Wireless and VGAdrivers
4. Please configure Laptop clientas follows:
- Companyname
:LKS2016
- Organization
:LKS2016
- Computername
:PC-x or Laptop-x( x is the competitor’s number, ex.:PC–1 o r Laptop-1)
- Username
:lks2016-x(x is the competitor’s number)
- Userpassword
:lksx (x is the competitor’s number)
- IPaddressLAN
:10.10.10.x /24(x is the competitor’s number)
- IPaddressWLAN :172.16.x.v/28(x is the competitor’s number and v is the valid number).
Part2–PCRouterSetup
1. Setup PC Router with the operating system Linux Debian 6 with kernel version 2.6 or newer.
2.Use DVD(s) as installation source. All software packages needed will be gathered from DVD(s).
Don’t install graphical user interface (GUI) such as KDE, GNOME,etc.
3. PCRouter configuration:
- Host
:routerX
(x is the competitor’snumber)
- IP Address of external LANcard :192.168.x.w/29
(x is the competitor’s number and w is
the valid number)
- Root password
:lks2016
4. Configure PC Router to connect PC Server and PC Client.
Part3–PCServer Setup
1. Setup PC Server with the operating system Linux Debian6 with kernel version 2.6 or newer
2. UseDVD(s) which used to setup PCRouter as installation source. All software packages needed
will be gathered from DVD(s). Don’t install graphical user interface (GUI) such as
KDE,GNOME,etc.
3. PC Server configuration:
- Host
:serverx
(x is the competitor’s number)
- IPAddress
- Rootpassword
:192.168.x.y/29 (x is the competitor’s number and y is the valid
number).
:lks2016
Part4–AccessPointSetup
1. Connect the Access Point to Laptop Client
2. Configure theWireless Accesspoint as follows:
- Ipaddress as172.16.X.Y/28 (X is the competitor’s number and Y is the valid number)
- WPA-PSK authentication with pre-sharedkey(lksxx00000), xx is the competitor’s number
- SSID as AP-X (x is the competitor’s number)
- SSID broadcast “disable”
SECTION2–WORKTASKNETWORK
Part5–Cabling
1. Make a crossover cable with +2 meters long then give label “CC-x” near to each connector (x is
competitor’s number) according to standard T568B.
2. Make a straighthrough cable with +2 meters long then give label “ST-x” near to each connector (x is
competitor’s number) standard T568B.
Part6–Network Installation
Setup networks according to the figure 1 below:
Part 7 – Sharing Data With Samba
1. Share your home directory with samba aplication.
2. in your home directory please make 2 directory. First user permission can’t full access “Private” and
second directory can full access “Public”.
3. Add user to access “Private” directory.
Part 8–Filesharing
1. Copyfile“form.txt”from Judge’s computer
2. Fill in information as required in the file “form.txt”
3. Save the file to desktop as “form-x.txt”(x is competitor’s number)
Part 9–Printersharing with Admin & Cups
1. Add printer which connected to the Judge’scomputer
2. Print file “form-x.txt”above.
3. Share your printer with Cups
SECTION3–SERVERCONFIGURATION
Part 10 – IP Virtual
1. Configure the IP with Virtual IP to use in DNS
2. The prefix IP is 192.168.x.1-5 to dns delegation (master, www, mail, ftp, ntp, cube, etc).
Part 11 – Packet Forwarding
1. This is aplication to routing so, in above can be configure to your router and server setup
2. Please ceck your conection from client to router, server, and PC Admin.
Part 12 – Remote Server and Router use Telnet & SSH
1. Configure telnet or ssh with port 22 to remote your server or router
Part13–ConfigureDNSServer
1. Configure DNS Server with domain : http://www.lksx.sch.id ( x is the competitor’s number).
Part14–ConfigureHTTPServer& HTTPS
1. Configure HTTP Server as follow:
- Support html
- Support php
- Index.html:“Welcome to Lomba Keterampilan Siswa 2016 in Kabupaten Pesawaran”
(index.html has to be a valid html file).
2. Configure HTTPS to access your domain https://lksx.sch.id
Part 15–Configure Mail Server
1. Configure Mail Server as follows:
- Postfix
- SMTP no relay
- Make user client
Username :admin
Password
:admin
- E-mail address admin@lksx.sch.id ( x is the competitor’snumber)
- Use IMAP/POP.
Part 16–Configure Web Mail Server
1. User scan access email via the web. Mail server which we will discuss here is to use postfix
and dovecot.
2. For webmail,we use SquirrelMail.
3. Domain is http://mail.lksx.sch.id/ (x is the competitor’s number)
Part 17–Configure NTP Server
1. NTP runs on UDP protocol, which is light weight and unreliable NTPServer
2. NTPserver, located in the ntp.conf file.
Part 18 – Web administration with Webmin
1. Install and configure webmin use https://lksx.sch.id:10000
Part19–ConfigureProxyServer
1. Configure Proxy Server to block the websites listed below. Use the ACL(access control list) to
achieve this.
- www.debian.org
-www.google.com
- www.facebook.com, etc.
2. Configure Squid to network in transparent mode using IPTABLES. Use NAT to configure NIC
client to use the proxy. All network clients will use the proxy automatic.
SECTION4–ROUTER CONFIGURATION
Part 20 – Packet Forwarding
1. This is aplication to routing so, in above can be configure to your router and server setup
2. Please ceck your conection from client to router, server, and PC Admin.
Part 21 – Remote Server and Router use Telnet & SSH
1. Configure telnet or ssh with port 22 to remote your server or router
Part22–Configure DHCPServer
1. Fill IPAddress of DHCPServer with valid available IPaddress.
2. Change external LANcard IPAddress of PCRouter to DHCP, After you configure the
DHCPServer, setback IPAddress of external LANcard of PCRouter according to figure1.
TIME WORK DESCRIPTION PRIORITY
Section Time Priority to work the task
SECTION
TIME
Installasion PC & AP
30 Minute
Cabling
10 Minute
Network Sharing
10 Minute
Server Configuration
40 Minute
Router Configuration
10 Minute
Maters Added
20 Minute
Total Time
120 Minute / 2 Hours
DETAIL
All install one time
2 Stright 1 Cross
Sharing & Field the form
All Configure in Server
All Configure in Router
Install & Configure
All Task & Work
SEKOLAH MENENGAH KEJURUAN
TINGKAT KABUPATEN PESAWARAN
BIDANG LOMBA
IT NETWORK SYSTEM
ADMINISTRATIONS
TEKNIK KOMPUTER & JARINGAN
DINAS PENDIDIKAN DAN KEBUDAYAAN
KABUPATEN PESAWARAN
TAHUN 2016
st
1 DayCompetition
(Part1– Part22)
SECTION1–WORK TASK SERVER AND CLIENT
Part1–PC /LaptopClientSetup
1. Setup PC client or Laptop client using Operating System Windows 7 / 8 Profesional Ensure that all
components are correctly installed.
2. Create 2 formatted partitions as follows:
- C:50% of harddisk capacity using NTFS partition
- D:50% of harddisk capacity using FAT32 partition
3. Install networkcard, Wireless and VGAdrivers
4. Please configure Laptop clientas follows:
- Companyname
:LKS2016
- Organization
:LKS2016
- Computername
:PC-x or Laptop-x( x is the competitor’s number, ex.:PC–1 o r Laptop-1)
- Username
:lks2016-x(x is the competitor’s number)
- Userpassword
:lksx (x is the competitor’s number)
- IPaddressLAN
:10.10.10.x /24(x is the competitor’s number)
- IPaddressWLAN :172.16.x.v/28(x is the competitor’s number and v is the valid number).
Part2–PCRouterSetup
1. Setup PC Router with the operating system Linux Debian 6 with kernel version 2.6 or newer.
2.Use DVD(s) as installation source. All software packages needed will be gathered from DVD(s).
Don’t install graphical user interface (GUI) such as KDE, GNOME,etc.
3. PCRouter configuration:
- Host
:routerX
(x is the competitor’snumber)
- IP Address of external LANcard :192.168.x.w/29
(x is the competitor’s number and w is
the valid number)
- Root password
:lks2016
4. Configure PC Router to connect PC Server and PC Client.
Part3–PCServer Setup
1. Setup PC Server with the operating system Linux Debian6 with kernel version 2.6 or newer
2. UseDVD(s) which used to setup PCRouter as installation source. All software packages needed
will be gathered from DVD(s). Don’t install graphical user interface (GUI) such as
KDE,GNOME,etc.
3. PC Server configuration:
- Host
:serverx
(x is the competitor’s number)
- IPAddress
- Rootpassword
:192.168.x.y/29 (x is the competitor’s number and y is the valid
number).
:lks2016
Part4–AccessPointSetup
1. Connect the Access Point to Laptop Client
2. Configure theWireless Accesspoint as follows:
- Ipaddress as172.16.X.Y/28 (X is the competitor’s number and Y is the valid number)
- WPA-PSK authentication with pre-sharedkey(lksxx00000), xx is the competitor’s number
- SSID as AP-X (x is the competitor’s number)
- SSID broadcast “disable”
SECTION2–WORKTASKNETWORK
Part5–Cabling
1. Make a crossover cable with +2 meters long then give label “CC-x” near to each connector (x is
competitor’s number) according to standard T568B.
2. Make a straighthrough cable with +2 meters long then give label “ST-x” near to each connector (x is
competitor’s number) standard T568B.
Part6–Network Installation
Setup networks according to the figure 1 below:
Part 7 – Sharing Data With Samba
1. Share your home directory with samba aplication.
2. in your home directory please make 2 directory. First user permission can’t full access “Private” and
second directory can full access “Public”.
3. Add user to access “Private” directory.
Part 8–Filesharing
1. Copyfile“form.txt”from Judge’s computer
2. Fill in information as required in the file “form.txt”
3. Save the file to desktop as “form-x.txt”(x is competitor’s number)
Part 9–Printersharing with Admin & Cups
1. Add printer which connected to the Judge’scomputer
2. Print file “form-x.txt”above.
3. Share your printer with Cups
SECTION3–SERVERCONFIGURATION
Part 10 – IP Virtual
1. Configure the IP with Virtual IP to use in DNS
2. The prefix IP is 192.168.x.1-5 to dns delegation (master, www, mail, ftp, ntp, cube, etc).
Part 11 – Packet Forwarding
1. This is aplication to routing so, in above can be configure to your router and server setup
2. Please ceck your conection from client to router, server, and PC Admin.
Part 12 – Remote Server and Router use Telnet & SSH
1. Configure telnet or ssh with port 22 to remote your server or router
Part13–ConfigureDNSServer
1. Configure DNS Server with domain : http://www.lksx.sch.id ( x is the competitor’s number).
Part14–ConfigureHTTPServer& HTTPS
1. Configure HTTP Server as follow:
- Support html
- Support php
- Index.html:“Welcome to Lomba Keterampilan Siswa 2016 in Kabupaten Pesawaran”
(index.html has to be a valid html file).
2. Configure HTTPS to access your domain https://lksx.sch.id
Part 15–Configure Mail Server
1. Configure Mail Server as follows:
- Postfix
- SMTP no relay
- Make user client
Username :admin
Password
:admin
- E-mail address admin@lksx.sch.id ( x is the competitor’snumber)
- Use IMAP/POP.
Part 16–Configure Web Mail Server
1. User scan access email via the web. Mail server which we will discuss here is to use postfix
and dovecot.
2. For webmail,we use SquirrelMail.
3. Domain is http://mail.lksx.sch.id/ (x is the competitor’s number)
Part 17–Configure NTP Server
1. NTP runs on UDP protocol, which is light weight and unreliable NTPServer
2. NTPserver, located in the ntp.conf file.
Part 18 – Web administration with Webmin
1. Install and configure webmin use https://lksx.sch.id:10000
Part19–ConfigureProxyServer
1. Configure Proxy Server to block the websites listed below. Use the ACL(access control list) to
achieve this.
- www.debian.org
-www.google.com
- www.facebook.com, etc.
2. Configure Squid to network in transparent mode using IPTABLES. Use NAT to configure NIC
client to use the proxy. All network clients will use the proxy automatic.
SECTION4–ROUTER CONFIGURATION
Part 20 – Packet Forwarding
1. This is aplication to routing so, in above can be configure to your router and server setup
2. Please ceck your conection from client to router, server, and PC Admin.
Part 21 – Remote Server and Router use Telnet & SSH
1. Configure telnet or ssh with port 22 to remote your server or router
Part22–Configure DHCPServer
1. Fill IPAddress of DHCPServer with valid available IPaddress.
2. Change external LANcard IPAddress of PCRouter to DHCP, After you configure the
DHCPServer, setback IPAddress of external LANcard of PCRouter according to figure1.
TIME WORK DESCRIPTION PRIORITY
Section Time Priority to work the task
SECTION
TIME
Installasion PC & AP
30 Minute
Cabling
10 Minute
Network Sharing
10 Minute
Server Configuration
40 Minute
Router Configuration
10 Minute
Maters Added
20 Minute
Total Time
120 Minute / 2 Hours
DETAIL
All install one time
2 Stright 1 Cross
Sharing & Field the form
All Configure in Server
All Configure in Router
Install & Configure
All Task & Work