98 19V type
or more Less than
32V type Liquid crystal
normal With no added functions
E=2.0×S+6 With 1 added function
E=2.0×S+18 With 2 added functions
E=2.0×S+30 With 3 added functions
E=2.0×S+42 Liquid crystal
double-speed With no added functions
E=2.0×S+21 With 1 added function
E=2.0×S+33 With 2 added functions
E=2.0×S+45 With 3 added functions
E=2.0×S+57 Liquid crystal
quadruple speed or
plasma With no added functions
E=2.0×S+43 With 1 added function
E=2.0×S+55 With 2 added functions
E=2.0×S+67 With 3 added functions
E=2.0×S+79
32V type or more
Liquid crystal normal
With no added functions E=6.6×S-141
With 1 added function E=6.6×S-129
With 2 added functions E=6.6×S-117
With 3 added functions E=6.6×S-105
Liquid crystal double-speed
With no added functions E=6.6×S-126
With 1 added function E=6.6×S-114
With 2 added functions E=6.6×S-102
With 3 added functions E=6.6×S-90
Liquid crystal quadruple
speed or plasma
With no added functions E=6.6×S-104
With 1 added function E=6.6×S-92
With 2 added functions E=6.6×S-80
With 3 added functions E=6.6×S-68
Note: 1. FHD refers to ones having 1,080 or more pixels in the vertical direction and 1,920 or
more in the horizontal direction.
2. Television receiver size refers to the centimeter-denominated quotient, rounded at the
decimal point, of division of the diagonal dimension of the driven display area of the display screen by 2.54.
3. Dynamic image display refers to or another of the following.
Liquid crystal normal: What uses a liquid crystal panel to display 60 or more
but less than 120 still frames per second. Liquid crystal double speed: What uses a liquid crystal panel to display 120 or
more but less than 240 still frames per second. Liquid crystal quadruple speed: What uses a liquid crystal panel to display 240 or
more still frames per second. Plasma: What performs displaying by using a plasma display panel.
4. Additional functions refers to DVD solely those having a video recording function,
M agnetic disc drive units drive unit, double digital tuner and blue ray disk recorder. 5.Energy consumption efficiency is calculated according to “2 Energy Consumption Efficiency
M easurement Methods 2-2,” in Ministry of Economy, Trade and Industry notification No. 24 February 18, 2010, based on the Law Concerning the Rational Use of Energy.
99 2 Target Setting Guideline
Ratio of the number of television receivers meeting the criteria to the total number of television receivers to be purchased including lease and rental agreements in the fiscal
year.
100
7-3. Electric Toilet S eats 1 Items and Evaluation Criteria
Electric toilet seats Evaluation Criteria
Energy consumption efficiency shall not exceed the result, decimal point eliminated, of the standard energy efficiency rate
calculated using the formula for each category listed in Table multiplied by 100159.
Factors for Consideration 1
The item is designed so that it can be easily dismantled and its materials separated to facilitate either reuse of components or
recycling of materials. 2
The item uses a large amount of recycled components that have already been used, and uses as large amount of recycled
plastic as possible if plastic components are used. 3
Packaging and stowage is to be as simple as possible and take into account ease of recycling and reduced environmental
impact upon disposal. 4
A system for the collection and reuserecycling of packaging, etc. is considered.
Note: 1. Products that meet the below criteria will not be considered Electric toilet seats under
consideration in the evaluation criteria of this section: a. Electric toilet seats that use warm water supplied from a separate warm water
system. b. Electric toilet seats, those are equipped only with warm water washing apparatus.
c. Portable electric toilet seats that are used for welfare purposes. d. Electric toilet seats that are primarily used in train cars.
2. Recycled plastic denotes part or all of plastic once used as a part of a useful product that
