85 rooms, including projectors capable to project on the screen with 60 inches 1.2 m ×
0.9m or more in width within a distance of 1 meter referred to as Short focu s projector hereinafter, especially, the one within a distance of 0.5m referred to as Super
short focus projector.
2.
Standby power consumption refers to minimum power consumption at which a
product may be connected to a main power source and maintained for an indefinite period of time. Standby is a product minimum power consumption mode.
3. Evaluation Criteria 3 does not applies for the products having AC interception
device and the portable one for mobile use mainly. 4.
Provide the information in Evaluation Criteria 4 a. denotes that specific information
for use of mercury and appropriate disposal method of a used lamp must be provided to the user, by indicating on package of the lamp or the product main body, enclosed
printed material, user’s manual and websites.
5.
A system is in place for the collection in Evaluation Criteria 4 b. denotes the
fulfillment of the below requirements. a.
The manufacturer or the seller has a system a collection system located at the store, or collection in response to the user’s request for voluntarily collecting collecting
on its own or commissioning other companies to collect; includes situations where multiple businesses undertake the collection together used lamp and the product
main body.
b. In order to precipitate appropriate collection, the product name and business name
manufacturer brand name is permissible are marked on the lamp and product main body for easy acknowledgement at the time of disposal.
c. Specific information for the collection collection method, collection location, etc.,
must be provided to the user by either package of the lamp and product main body, printed matter, manual or websites concerning used lamp and used product.
6. The standard content rate of specified chemical substances will not exceed the standard content rate of JIS C 0950:2008 The marking for presence of the specific chemical
substances for electrical and electronic equipment Appendix A, chart A.1 specified chemical substances, chemical element symbol, substances applicable for calculation,
and standard content rate. Items for which content rate exceeding the standard is allowed are to be determined in accordance with Appendix B of the above JIS.
Handling of other accessories is to be determined in accordance with JIS C 0950:2008.
7. Time for lamp replacement denotes average hours of lamp operating till the effective
flux when a product is used falls below 50 of the nominal effective flux and standard hours to lead a proper lamp replacement.
8. Recycled Plastic denotes part or all of plastic once used as a part of a useful product
that has been discarded, remnants discarded during the manufacturing process, or the recyclereuse of defective articles This excludes, however, plastic that has been
recycled in the process of manufacturing the product..
9. Each procurement organization is to take the following into careful account: a.
When procuring, consider the objective of use and business type in order to determine the necessary type and function.
b. Consider the type of contract that would enable the
minimum amount necessary for manuals and accessories. c.
Confirm and consider the factors for consideration specified in the user’s manual when procuring the
merchandise, when using and disposing.
86 d.
If a system for the collection of used lamps or products is in pace, proper disposals of them should be done by utilizing
the system.
Table 1: The Standard of the Weight of Product Main Body
Effective Flux:
87
6. Mobile Telephones 1 Items and Evaluation Criteria
Cellular phones PHS
Evaluation Criteria 1
Must fulfill one of the following: a.
Simplification of additional equipments and functions is considered.
b. The system allows for upgrading of applications
added to the terminal without exchanging the main body of the machine.
c. The design takes into account the environmental
considerations that are included in the evaluation criteria in Table, including the ease of
dismantling for the reuse of parts or recycling of material.
The implementation
of environmentally conscious design can be easily
confirmed on websites and other public environmental reports.
2 A system is in place for the collection and material recycling of
used mobile phones. The implementation rate of system for collection and material recycling can be easily confirmed on
websites of manufacturers, communication companies, and sales companies, as well as other environmental reports.
3 A system is in place by the manufacturer, communication
company, or sales company for the appropriate disposal of parts of collected mobile phones that cannot be recycled or reused.
4 A system is in place by the manufacturer, communication
company, or sales company for the repair and storage of renewing expendable parts such as the batteries maintain for
six years or more after the termination of product manufacturing.
5 Specified chemical substances do not exceed the standard
content rate. The content rate can be easily confirmed on websites, etc.
Factors for Consideration 1
Energy saving devices such as the conservation of electricity and lower electricity consumption in wait mode are put in place.
2 When rare metals are used for the casing or parts, a system is in
place to decrease or replace the rare metals as much as possible. 3
A system is in place for the repair and for the storage of replaceable parts for parts other than the main body and
expendables. 4
The use of halogenenate noncombustibles on the casing is as minimized as possible.
5 The item is made of as large amount of recycled plastic as
possible if plastic components are used for the casing or the parts including the recharger.
6 Packaging and stowage is to be as simple as possible and take
88 into account ease of recycling and reduced environmental
impact upon disposal. 7
A system for the collection and reuserecycling of packaging, etc. is considered.
Note: 1.
Cellular phones and PHS under consideration refers to those that are used for
ordinary administrative tasks. 2.
Simplification of additional equipments and functions refers to the limiting of
functions to conversations and mail whenever possible. 3.
Evaluation Criteria 1 a. refers to environmentally conscious design indicated in each evaluation criteria of Table.
4.
A system is in place for the collection and material recycling in Evaluation Criteria
2 denotes the fulfillment of the below requirements. A system for collection should fulfill the below requirements a. b. and c.
a. The manufacturer or the seller has a system a collection
system located at the store, or collection in response to the user’s request for voluntarily collecting collecting on its
own or commissioning other companies to collect; includes situations where multiple businesses undertake
the collection together used cellular phones, etc.
b. In order to precipitate appropriate collection, the product
name and business name manufacturer brand name is permissible are marked on the main body of the phone for
easy acknowledgement at the time of disposal.
c. Specific information for the collection of used mobile
phones, etc. collection method, collection location, etc. are available for the users on the package, enclosed printed
matter, user’s manual, or the website.
A system for material recycling should fulfill the below requirements d and e. d.
A system is in place to recycle metal and plastic, etc. as materials.
e. The information for the material used for the parts is listed
as much as possible to enable separation upon disposal. 5.
For Evaluation Criteria 4, “maintain for six years or more after the termination of product manufacturing” does not apply in cases when applicable machine cannot be
used continuously due to change in the communication system. 6.
The use of specified chemical substances will not exceed the standard content rate of JIS C 0950:2008 The marking for presence of the specific chemical substances for
electrical and electronic equipment Appendix A, chart A.1 specified chemical substances, chemical element symbol, substances applicable for calculation, and
standard content rate.
89 that has been discarded, remnants discarded during the manufacturing process, or the
recyclereuse of defective articles This excludes, however, plastic that has been recycled in the process of manufacturing the product.
9. Each procurement organization is to take the following into careful account:
a. When procuring, consider the objective of use and business
type in order to determine the necessary type and function. b.
Consider the type of contract that would enable the minimum amount necessary for manuals and accessories
such as a recharger. c.
Confirm and consider factors for consideration specified in the user’s manual when procuring the merchandise.
d. When disposing the terminal due to a renewal of the
mobile phone terminal, etc., proceed in an appropriate manner using the collection system.
Table: Design Criteria for Environmental Consideration in Mobile Phones Objective
Evaluation Criteria Evaluation Standard
Design with
considerations for reduction
Resource efficiency of product minimization of size and
weight The volume and weight of product
is reduced.
Energy efficiency of product The
energy consumption
of product is reduced. Attempt is
made for developing low energy consumption technology.
Longer life of product Reliability and durability of the
product are either maintained or improving.
Design with
considerations for reuse
Design for joint ownership The recharger etc., is designed
with consideration for ease of reuse.
Design for easy separation and dismantling
Separation and dismantling for reuse can be performed with ease.
Design with
considerations for recycling
Reduction of environmental load when recycling
Parts that include rare metals as well as types of ordinary metals
such as
steel, copper
and aluminum are understood.
Use of complex material and processed material that interferes
with recycling are reduced.
Structure allows for ease of separation and dismantling
Structure allows for separation and dismantling to convert into
material and parts that can be used as recycled material.
The structure allows for easy dismantling of different materials.
Separation and dismantling for recycling is easy.
90 Ease
of separation
is considered
M aterial can
be easily
distinguished for recycling. The type and quality of plastic
used for the casing is unified as much as possible.
2 Target Setting Guideline Ratio of the number of products meeting the criteria to the total number of cellular phones
and PHS to be purchased including lease in the fiscal year.
91
7. Home Electronic Appliances 7-1. Electric Refrigerators, etc.
