NACE Standards Related to Protective Coatings
23.4.1 NACE Standards Related to Protective Coatings
corrosion products, and other foreign mate- rial, except as noted in Section 2.2 of the
• NACE No. 1/SSPC-SP 5: Joint
standard. Random staining shall be limited Surface Preparation Standard, to no more than 33% of each unit area of
White Metal Blast Cleaning surface. Staining may consist of light shad-
• NACE No. 2/SSPC-SP 10: Joint
ows, slight streaks, or minor discolorations Surface Preparation Standard, caused by rust, mill scale, or previously
Near-White Metal Blast Cleaning applied coatings. Slight residues of rust and
• NACE No. 3/SSPC-SP 6: Joint
paint may also be left in the bottom of the Surface Preparation Standard, pits if the original surface is pitted.
Commercial Blast Cleaning SSPC-SP 11, Power Tool Cleaning to Bare
• NACE No. 4/SSPC-SP 7: Joint
Metal: A steel surface cleaned with power Surface Preparation Standard, Brush-Off Blast Cleaning
23-4 Standards
• NACE No. 5/SSPC-SP 12: Joint
• RP0304-2004: Design, Installation, Surface Preparation Standard, and Operation of Thermoplastic Lin- Surface Preparation and Cleaning of
ers for Oilfield Pipelines Metals by Waterjetting Prior to
• RP0375-2006: Wax Coating Systems Recoating
for Underground Piping System
• NACE No. 6/SSPC-SP 13: Joint
• RP0281-2004: Method for Conduct- Surface Preparation Standard, ing Coating (Paint) Panel Evaluation
Surface Preparation of Concrete Testing in Atmospheric Exposures
• NACE No. 8/SSPC-SP 14: Joint
• RP0288-2004: Inspection of Linings Surface Preparation Standard, on Steel and Concrete
Industrial Blast Cleaning • RP0297-2004: Maintenance Paint-
• NACE No. 10/SSPC-PA 6: Fiber- ing of Electrical Substation Apparatus glass-Reinforced Plastic (FRP) Lin-
Including Flow Coating of Trans- ings Applied to Bottoms of Carbon
former Radiators
Steel Above Ground Storage Tanks • RP0303-2003: Field-Applied Heat-
• NACE No. 11/SSPC-PA 8: Thin- Shrinkable Sleeves for Pipelines: Film Organic Linings Applied in New
Application, Performance, and Qual- Carbon Steel Process Vessels
ity Control
(RP0103-2003) • RP0394-2002: Application, Perfor-
• NACE No. 12/AWS C2.23M/
mance, and Quality Control of Plant- SSPC-CS 23.00: Specification for
Applied, Fusion-Bonded Epoxy Exter- the Application of Thermal Spray
nal Pipe Coating
Coatings (Metallizing) of Aluminum, • RP0399-2004: Plant-Applied, Exter- Zinc, and their Alloys and Composites nal Coal Tar Enamel Pipe Coating for the Corrosion Protection of Steel Systems: Application, Performance,
• NACE No. 13/SSPC-ACS-1: and Quality Control Industrial Coating and Lining Appli-
• RP0402-2002: Field-Applied cation Specialist Qualification and Fusion-Bonded Epoxy (FBE) Pipe Certification (SP0307-2007) Coating Systems for Girth Weld
• RP0105-2005: Liquid-Epoxy Coat- Joints: Application, Performance, and ings for External Repair, Rehabilita-
Quality Control
tion, and Weld Joints on Buried Steel • RP0602-2002: Field-Applied Coal Pipelines Tar Enamel Pipe Coating Systems:
• RP0274-2004: High-Voltage Electri- Application, Performance, and Qual- cal Inspection of Pipeline Coatings
ity Control
Prior to Installation • SP0108-2008: Corrosion Control of
• RP0287-2002: Field Measurement of Offshore Structures by Protective Surface Profile of Abrasive Blast
Coatings
Cleaned Steel Surfaces using a Rep- • SP0109-2009: Field Application of lica Tape Bonded Tape Coatings for External
Standards 23-5
Repair, Rehabilitation, and Weld • TM0204-2004: Exterior Protective Joints on Buried Metal Pipelines
Coatings for Seawater Immersion Ser- • SP0178-2007: Fabrication Details,
vice
Surface Finish Requirements, and • TM0304-2004: Offshore Platform Proper Design Considerations for
Atmospheric and Splash Zone Mainte- Tanks and Vessels to be Lined for
nance Coating System Evaluation Immersion Service
• TM0404-2004: Offshore Platform • SP0185-2007: Extruded Polyolefin
Atmospheric and Splash Zone New Resin Coating Systems with Soft Adhe-
Construction Coating System Evalua- sives for Underground or Submerged
tion
Pipe