Perencanaan Produksi Crude Palm Oil (CPO) dengan Metode Goal Programming (Studi Kasus: PT. Samudera Sawit Nabati, Subulussalam)

PERENCANAAN PRODUKSI CRUDE PALM OIL (CPO) DENGAN
METODE GOAL PROGRAMMING
(STUDI KASUS: PT. SAMUDERA SAWIT NABATI, SUBULUSSALAM)

ABSTRAK

Perencanaan produksi adalah suatu kegiatan yang berkenaan dengan penentuan
produk apa dan berapa jumlah yang akan diproduksi oleh suatu perusahaan untuk
satu periode mendatang. PT. Samudera Sawit Nabati (PT. SSN) selama ini
beroperasi berdasarkan ketersediaan bahan baku, sehingga menyebabkan
terjadinya idle capacity saat jumlah bahan baku berlebih. Selain itu, perusahaan
juga sering menghadapi keadaan adanya ketidaksesuaian jumlah produksi CPO
dengan volume permintaan CPO. Penelitian ini bertujuan untuk menentukan
jumlah produksi CPO yang optimal agar meminimumkan kerugian perusahaan.
Optimasi produksi CPO dilakukan dengan metode Goal Programming dan
penyelesaian model dilakukan dengan bantuan program Linear Interactive
Discrete Optimizer (LINDO). Fungsi tujuan dari model dibuat berdasarkan
sasaran-sasaran yang hendak dicapai PT. SSN, yakni memenuhi permintaan CPO,
meminimumkan biaya produksi CPO, meminimumkan biaya pembelian Tandan
Buah Segar (TBS), dan memaksimumkan pengolahan TBS. Hasil yang diperoleh
dari penelitian ini adalah jumlah produksi CPO yang optimal untuk periode

Januari 2015 – Desember 2015 berturut-turut sebesar 1.378.725 kg; 1.278.488 kg;
1.187.206 kg; 1.305.031 kg; 1.182.804 kg; 1.669.808 kg; 1.812.246 kg; 1.930.818
kg; 1.943.660 kg; 1.713.568 kg; 1.225.277 kg; dan 1.090.549 kg. Total biaya
produksi CPO selama tahun 2015 berhasil diminimumkan, yakni sebesar Rp
173.094.672.980,00. Total biaya pembelian TBS selama tahun 2015 berhasil
diminimumkan, yakni sebesar Rp 160.588.254.730,00. Jumlah TBS yang diolah
menjadi CPO berhasil dimaksimumkan, yakni sebesar 93.854.950 kg.

Kata kunci: Perencanaan Produksi, Optimal, Optimasi Produksi, Goal
Programming

v
Universitas Sumatera Utara

PRODUCTION PLANNING OF CRUDE PALM OIL (CPO) WITH GOAL
PROGRAMMING METHOD
(CASE STUDY: PT. SAMUDERA SAWIT NABATI, SUBULUSSALAM)

ABSTRACT

Production planning is an activity about determining what and how many
products to be manufactured by a company in the next period. PT. Samudera
Sawit Nabati (PT. SSN) has been operating based on the availability of raw
materials, allowing idle capacity as the raw materials are over the standard
number. Moreover, the company often faces the situation of discrepancy between
the production quantity and the demand volume of CPO. This research aims to
determine the optimal production quantity of CPO in order to minimize the
company’s loss. Optimization of the CPO production is done by using Goal
Programming method and the model completion is performed with the support of
Linear Interactive Discrete Optimizer (LINDO). The objective function of the
model is based on the goals to be achieved by PT. SSN, i.e. to fulfil the demand
volume of CPO, to minimize the production cost of CPO, to minimize the
purchase cost of Fresh Fruit Bunch (FFB) and to maximize the number of FFB to
be processed. The result of this research is the optimal production quantity of
CPO for the period of January 2015 – December 2015 as follows : 1.378.725 kg;
1.278.488 kg; 1.187.206 kg; 1.305.031 kg; 1.182.804 kg; 1.669.808 kg; 1.812.246
kg; 1.930.818 kg; 1.943.660 kg; 1.713.568 kg; 1.225.277 kg and 1.090.549 kg.
The total production cost of CPO by 2015 has succeeded to be minimized, i.e. Rp
173.094.672.980,00. The total purchase cost of FFB by 2015 has succeeded to be
minimized, i.e. Rp 160.588.254.730,00. The number of FFB to be processed into

CPO has succeeded to be maximized, i.e. 93.854.950 kg.

Keywords: Production Planning, Optimal, Production Optimization, Goal
Programming

vi
Universitas Sumatera Utara