LSPro STD OPS 03 Ed.0 Rev.0 2013 List of Inspection or Testing Equipments
LSPro/STD-OPS-03;Ed.0;Rev.0;2013
INSTITUTE FOR INDUSTRIAL CERTIFICATION
AGENCY FOR INDUSTRIAL POLICY BUSINESS CLIMATE AND QUALITY ASSESSMENT
MINISTRY OF INDUSTRY R.I.
LIST OF INSPECTION / TESTING EQUIPMENTS
Company Name
:
Plant Address
:
No.
Name of Equipment
Inspection / Testing
(Type and Brand)
Amount
Nominal Measurement
Last
Capability
Calibration
Page 1 of 2
Frequency of
Calibration
LSPro/STD-OPS-03;Ed.0;Rev.0;2013
INSTITUTE FOR INDUSTRIAL CERTIFICATION
AGENCY FOR INDUSTRIAL POLICY BUSINESS CLIMATE AND QUALITY ASSESSMENT
MINISTRY OF INDUSTRY R.I.
LIST OF INSPECTION / TESTING EQUIPMENTS
Note:
1.
In the column "Name of Equipment Inspection / Testing", write the name of the equipment inspection /
testing of the major needed for checking the quality of materials and products that meet the specified
requirements including the requirements of the Indonesian National Standard used.
2.
In the column "Amount", write the number of equipment inspection / testing is concerned which is
owned by the manufacturer.
3.
In the column "Amount", write the total number of equipment inspection / testing owned by the
manufacturer
4.
In the column "Nominal Measurement Capability", write a nominal capacity of the equipment
inspection / testing is used
5.
In the column "Last Calibration", stated the last date calibrated equipment in accordance with
manufacturer standards
6.
In the column "Frequency of Calibration", write a frequency of calibration performed on equipment
inspection / testing is concerned in accordance with manufacturer standards
Attach a copy of the report or certificate of inspection equipment calibration / testing (for drinking water in packages).
Page 2 of 2
INSTITUTE FOR INDUSTRIAL CERTIFICATION
AGENCY FOR INDUSTRIAL POLICY BUSINESS CLIMATE AND QUALITY ASSESSMENT
MINISTRY OF INDUSTRY R.I.
LIST OF INSPECTION / TESTING EQUIPMENTS
Company Name
:
Plant Address
:
No.
Name of Equipment
Inspection / Testing
(Type and Brand)
Amount
Nominal Measurement
Last
Capability
Calibration
Page 1 of 2
Frequency of
Calibration
LSPro/STD-OPS-03;Ed.0;Rev.0;2013
INSTITUTE FOR INDUSTRIAL CERTIFICATION
AGENCY FOR INDUSTRIAL POLICY BUSINESS CLIMATE AND QUALITY ASSESSMENT
MINISTRY OF INDUSTRY R.I.
LIST OF INSPECTION / TESTING EQUIPMENTS
Note:
1.
In the column "Name of Equipment Inspection / Testing", write the name of the equipment inspection /
testing of the major needed for checking the quality of materials and products that meet the specified
requirements including the requirements of the Indonesian National Standard used.
2.
In the column "Amount", write the number of equipment inspection / testing is concerned which is
owned by the manufacturer.
3.
In the column "Amount", write the total number of equipment inspection / testing owned by the
manufacturer
4.
In the column "Nominal Measurement Capability", write a nominal capacity of the equipment
inspection / testing is used
5.
In the column "Last Calibration", stated the last date calibrated equipment in accordance with
manufacturer standards
6.
In the column "Frequency of Calibration", write a frequency of calibration performed on equipment
inspection / testing is concerned in accordance with manufacturer standards
Attach a copy of the report or certificate of inspection equipment calibration / testing (for drinking water in packages).
Page 2 of 2