Click Save. Then, click Close

Using Adapters 3-5

3.1.3 Removing Rule Generators from Form Fields

Sometimes, after you attach a rule generator to a form field, you can connect a different rule generator to that form field. When this occurs, you must first remove the rule generator that is currently attached to the form field. To remove a rule generator from a form field, perform the following steps:

1. Open the Data Object Manager form.

2. Select the form that contains a rule generator you want to remove.

3. The selected form, along with its rule generators, appear in the Data Object

Manager form.

4. Click the rule generator that you want to remove from the form field.

5. Click Delete.

The selected rule generator no longer appears in the Data Object Manager form. This indicates that you have removed the rule generator from the form field.

3.2 Working with Entity Adapters

For information about working with entity adapters, see: ■ Entity Adapters in Types of Adapters on page 2-3. ■ The procedures in Working with Rule Generator Adapters on page 3-1 for details about mapping the variables of an entity adapter with Oracle Identity Manager forms andor provisioning processes.

3.3 Working with Task Assignment Adapters

This section contains these topics: ■ Attaching Task Assignment Adapters to Process Tasks ■ Removing Task Assignment Adapters from Process Tasks Caution: If you remove a rule generator from a form and if the class name of the forms data object matches the table name of a provisioning process, you will not be able to assign the rule generator to that provisioning process. For example, suppose the adpCONVERTTOLOWERCASE rule generator is removed from the Solaris form. If the class name of the forms associated data object is UD_SOLARIS, the rule generator cannot be assigned to any provisioning process with a table name of UD_SOLARIS. Caution: If you attempt to remove a rule generator from a form field, and if an error box appears, the adapter has already been associated with a provisioning process. First, detach the rule generator from the process. Then, you can remove it from the form field.