1.00
16
Glasses for Arc Welding The glasses have dimension 60 x
110 mm and are manufactured in accordance with DIN standard and
are CE approved. When ordering face shields, filter shade glass of correct
shade should be ordered in addition to the filter shade 11 glasses which is
included.
The filter glasses are supplied in sets consisting of 5 safety glasses, 5
protection glasses and 5 filter shade glasses.
Items to be mounted into Unitor face shield in the following manner:
A. Safety glass Polycarbonate
The glass should be placed near- est to the eyes to protect against
slag or other particles while chip- pinggrinding. When using a shield
with a flip-up front frame, the safety glass shall be placed in the
fixed frame.
B. Filter shade glass
Filters out harmful infra-red and ultra-violet rays from the welding
arc, and reduces visible light to a level which is sufficient to see the
welding process without straining the welder’s eyes. Filter Shade
Glass should be selected after consulting the welding process
and amperage see table. The glasses are marked Protane Shade
SO 1 DIN 0196 CE
C. Protection glass
Is placed in front of the filter shade glass to protect against spatter.
The protection glass should be replaced at regular intervals.
A B
C
Guide to arc welding glasses
Amperage Filter Quantity
Product Shade
in number
Unit unit
0 A 8–9
5 sets 196-633230
0–40 A 9–10
5 sets 196-633248
40–80 A 10
5 sets 196-633255
80–175 A 11
5 sets 196-633263
175–300 A 1
5 sets 196-633271
300–500 A 13
5 sets 196-633289
Safety Glass 10 pcs
196-633222
Protection Glass 10 pcs
196-633214
1.00
17
1.00
18
Safety goggles clear for eye protection
Comfortable protective spectacles with integrated side guards. The lens
is made of scratch-resistant anti glare material. The temple arm length and
angle is adjustable. For use during daily maintenance work in workshop
and on site for protection against flying objects. The spectacles 1 pair
are supplied with cord and protective silk bag which also can be used for
cleaning the lenses.
Safety goggles Shade 5 for brazing and welding
Same modern lightweight design and features as the Clear version.
Fitted with Shade 5 lens. For use when doing brazing and light duty gas
welding and cutting work. Not for use when doing arc welding. The
spectacles 1 pair are supplied with cord and protective silk bag which also
can be used for cleaning the lenses.
Welding and grinding goggles Lightweight goggles with soft and
comfortable surfaces against the face. The ventilation slots are
designed to prevent entry of sparks and spatter, at the same time ensuring
sufficient air circulation to prevent dampness and fogging of the glasses.
The filter shade glass are mounted in a flip-up front frame. A protection
glass must be placed in front of the filter shade glass in order to protect
against spatter. One more protection glass must be placed in the fixed
frame.
Safety grinding goggles Half mask goggle of clear soft
synthetic none-mist material. For grinding only.
Product Pcs.
Product no.
WeldingGrinding Goggles wflip-up-frame
1 176-175273
Product Pcs.
Product no.
Safety Spectacles – Clear
1 176-632943
Product Pcs.
Product no.
Safety Spectacles – Shade 5
1 176-632950
Product Pcs.
Product no.
Safety grinding goggles non mist
1
176-653410
1.00
19
Guide to gas welding glasses
Application Filter
Pcs Product
Shade set number
Glass
Silver Brazing
3 10
176-633305
Gas Welding Cutting –
5 10
176-633313
General 6
10 176-633321
Gas Welding Cutting –
7 10
176-633354
Thick material Protection Glass
10 176-633297
Glasses for gas welding and cutting The Unitor gas welding glasses
have a diameter of 50 mm and fit the goggles. They are available in
different grades of shade for various types of work. All glasses come in
sets of 10 pcs.
A. Protection glass
