From the menu bar, choose the Configuration button and click Remote Access VPN to display the Click the button Clientless SSL VPN Remote Access using Web Browser to access the ASDM Review the on-screen text and topology diagram, and then click Next to con
a. From the menu bar, choose the Configuration button and click Remote Access VPN to display the
Introduction screen. From here you can access information on how to create any of the three types of remote access VPNs.b. Click the button Clientless SSL VPN Remote Access using Web Browser to access the ASDM
Assistant. Read through the information provided to get a better understanding of the process for creating this type of VPN. Step 2: Start the VPN wizard. a. From the ASDM main menu at the top of the browser window, select the Wizards VPN Wizards Clientless SSL VPN wizard. The SSL VPN wizard Clientless SSL VPN Connection screen is displayed.b. Review the on-screen text and topology diagram, and then click Next to continue.
CCNA Security All contents are Copyright © 1992 –2012 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 12 of 50 Step 3: Configure the SSL VPN user interface. a. On the SSL VPN Interface screen, configure ClientlessVPN-Con-Prof as the Connection Profile Name, and specify outside as the interface to which outside users will connect. Note: By default, the ASA will use a self-signed certificate to send to the client for authentication. Optionally, the ASA may be configured to use a third-party certificate that is purchased from a well-known certificate authority, such as VeriSign, to connect clients. In the event that a certificate is purchased, it may be selected in the Digital Certificate drop-down menu. The SSL VPN Interface screen provides links in the Information section. These links identify the URLs that need to be used for the SSL VPN service access login and for Cisco ASDM access to access the Cisco ASDM software.b. Click Next to continue.
CCNA Security All contents are Copyright © 1992 –2012 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 13 of 50 Step 4: Configure AAA user authentication. On the User Authentication screen, click Authenticate using the local user database and enter the user name VPN-User with a password of remote. Click Add to create the new user and click Next to continue. CCNA Security All contents are Copyright © 1992 –2012 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 14 of 50 Step 5: Configure the VPN group policy. On the Group Policy screen create a new group policy named ClientlessVPN-Grp-Pol. When configuring a new policy, the policy name cannot contain any spaces. Click Next to continue. Note: By default, the created user group policy will inherit its settings from the DfltGrpPolicy. These settings may be modified after the wizard has been completed by navigating to the Configuration Remote Access VPN Clientless SSL VPN Access Group Policies submenu. CCNA Security All contents are Copyright © 1992 –2012 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 15 of 50 Step 6: Configure the bookmark list clientless connections only. A bookmark list is a set of URLs that is configured to be used in the clientless SSL VPN web portal. If there are bookmarks already listed, use the Bookmark List drop-down menu, select the bookmark of choice and click Next to continue with the SSL VPN wizard. However, there are no configured bookmark lists by default and therefore they must be configured by the network administrator. a. From the Clientless Connections Only – Bookmark List screen, click the Manage button to create an HTTP server bookmark in the bookmark list. In the Configure GUI Customization Objects window, click Add to open the Add Bookmark List window. Name the list Web-Server. Note: If the Web-Server bookmark list is shown as available from a previous configuration, you can delete it in ASDM and recreate it. CCNA Security All contents are Copyright © 1992 –2012 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 16 of 50 CCNA Security All contents are Copyright © 1992 –2012 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 17 of 50b. From the Add Bookmark List window, click Add to open the Add Bookmark window. Enter Web Mail as
Parts
» CCNA Security 1.1 Instructor Lab Manual
» Lab A: Researching Network Attacks and Security Audit Tools
» Lab A: Securing the Router for Administrative Access
» Use the username command to create the user ID with the highest possible privilege level and a
» Issue the undebug all or the no debug ntp all command to turn off debugging.
» Click OK in the Commands Delivery Status window.
» Use the show logging command to see the type and level of logging enabled.
» Save the running config to the startup config using the copy run start command.
» Lab A: Securing Administrative Access Using AAA and RADIUS
» Click Send and you should see a Send Access_Request message indicating the server at
» Clear the log on the WinRadius server by choosing Log Clear from the main menu.
» Lab A: Configuring CBAC and Zone-Based Firewalls
» Issue the show run command to review the current basic configuration on R1.
» Display the Extended ACL named autosec_firewall_acl, which is applied to S000 inbound.
» Display the Extended ACL named autosec_firewall_acl that is applied to S000 inbound.
» Click Finish to complete the Firewall wizard.
» Lab A: Configuring an Intrusion Prevention System IPS Using the CLI and CCP
» From the R1 CLI, verify that the directory is present using the dir flash: or dir flash:ipsdir
» Apply the IPS rule to an interface with the ip ips name direction command in interface
» Verify connectivity between R1 and PC-A, the TFTP server, using the ping command.
» Use the show ip ips all command to see an IPS configuration status summary. To which
» For Protocol, select tftp from the drop-down menu. Enter the IP address of the PC-C TFTP server
» Lab A: Securing Layer 2 Switches Instructor Version
» From the router R1 CLI, use the show interface command and record the MAC address of the
» Set the SPAN source interface using the monitor session command in global configuration mode.
» Lab A: Exploring Encryption Methods Instructor
» Lab A: Configuring a Site-to-Site VPN Using Cisco IOS and CCP
» Verify the IKE policy with the show crypto isakmp policy command.
» Save the running config to the startup config for R1 and R3 using the copy run start command.
» Click the Launch the selected task button to begin the CCP Site-to-Site VPN wizard.
» Lab B: Configuring a Remote Access VPN Server and Client
» In the Command Delivery Status window, click OK. How many commands are delivered? 103 with
» Lab C Optional: Configuring a Remote Access VPN Server and Client
» Lab A: Security Policy Development and Implementation
» Verify that R1 and R3 have made an association with R2 using the show ntp associations
» Choose FastEthernet 01 as the Inside Trusted interface and Serial 001 as the Outside Untrusted
» From PC-A, Telnet to R2 at IP address 10.1.1.2 using the vty line password ciscovtypass.
» If the ipsdir directory is not listed, create it.
» Secure the router running configuration and securely archive it in persistent storage flash.
» Lab A: Configuring ASA Basic Settings and Firewall Using CLI
» Display the ASA file system using the show file system command to determine what prefixes are
» Display the current running configuration using the show running-config command.
» You can configure the ASA to accept HTTPS connections using the http command. This allows
» Issue the show route command to display the ASA routing table and the static default route just
» Save the RSA keys to persistent flash memory using either the copy run start or write mem
» Lab B: Configuring ASA Basic Settings and Firewall Using ASDM
» View this Access Rule in ASDM by choosing Configuration Firewall Access Rules. It appears
» Lab C: Configuring Clientless and AnyConnect Remote Access SSL VPNs Using ASDM
» Enable HTTP access to R1 using the ip http server command in global config mode. Also set
» From the Add Bookmark List window, click Add to open the Add Bookmark window. Enter Web Mail as
» Lab D: Configuring a Site-to-Site IPsec VPN Using CCP and ASDM
» Use the reload command to restart the ASA. This will cause the ASA to come up in CLI Setup
» In the Peer Identity section, select Peer with static IP address and enter the IP address of the
Show more