From the PC-A command prompt, issue the ipconfig all command to see the network Issue the show run command to view the various commands generated by CCP to configure the

CCNA Security All contents are Copyright © 1992 –2012 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 24 of 33 Step 6: Verify the VPN connection information for PC-A.

a. From the PC-A command prompt, issue the ipconfig all command to see the network

connections. C:\ ipconfig all Windows IP Configuration Host Name . . . . . . . . . . . . : PC-A Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 570x Gigabit Controller Physical Address. . . . . . . . . : 00-0B-DB-04-A5-CD Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.1.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Cisco Systems VPN Adapter Physical Address. . . . . . . . . : 00-05-9A-3C-78-00 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.3.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.3.1 b. What is the configuration for the first Local Area Connection? IP Address: 192.168.1.3 Subnet Mask: 255.255.255.0 Default Gateway: None because the VPN tunnel is activated Description: Broadcom 570x Gigabit Controller Answers will vary c. What is the configuration for Local Area Connection 2? IP Address: 192.168.3.101 answers will vary – 192.168.3.100-.150 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.3.1 R3 Fa01 interface Description: Cisco Systems VPN Adapter Step 7: Telnet from PC-A to R3. a. From the PC-A command prompt, telnet to R3 at the Fa01 IP address 192.168.3.1. Log in as admin01 with a password of admin01pass. What is the router command prompt and why is this? Because user admin was defined with privilege level of 15 the highest. The prompt defaults to privileged EXEC mode R3.

b. Issue the show run command to view the various commands generated by CCP to configure the

VPN server. CCNA Security All contents are Copyright © 1992 –2012 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 25 of 33 c. Issue the show users command to see connections to router R3. What connections are present?