IRON AND STEEL Product Specific Rules AANZFTA HS2007

AANZFTA – Annex 2 169 Column 1 Column 2 Column 3 Column 4 Tariff Heading Tariff Sub- Heading Product Description Product-Specific Rule 7110 Platinum, unwrought or in semi-manufactured forms, or in powder form: 7110 7110.11 - Platinum: unwrought or in powder form RVC40 or CC 7110 7110.19 - Platinum: other RVC40 or CC 7110 7110.21 - Palladium: unwrought or in powder form RVC40 or CC 7110 7110.29 - Palladium: other RVC40 or CC 7110 7110.31 - Rhodium: unwrought or in powder form RVC40 or CC 7110 7110.39 - Rhodium: other RVC40 or CC 7110 7110.41 - Iridium, osmium and ruthenium: unwrought or in powder form RVC40 or CC 7110 7110.49 - Iridium, osmium and ruthenium: other RVC40 or CC 7111 7111.00 Base metals, silver or gold, clad with platinum, not further worked than semi-manufactured. RVC40 or CC 7112 Waste and scrap of precious metal or of metal clad with precious metal; other waste and scrap containing precious metal or precious metal compounds, of a kind used principally for the recovery of precious metal: 7112 7112.30 - Ash containing precious metal or precious metal compounds Origin shall be conferred to a good of this subheading that is derived from production or consumption in a Party 7112 7112.91 - Other: of gold, including metal clad with gold but excluding sweepings containing other precious metals Origin shall be conferred to a good of this subheading that is derived from production or consumption in a Party 7112 7112.92 - Other: of platinum, including metal clad with platinum but excluding sweepings containing other precious metals Origin shall be conferred to a good of this subheading that is derived from production or consumption in a Party 7112 7112.99 - Other: other Origin shall be conferred to a good of this subheading that is derived from production or consumption in a Party

CHAPTER 72 IRON AND STEEL

AANZFTA – Annex 2 170 Column 1 Column 2 Column 3 Column 4 Tariff Heading Tariff Sub- Heading Product Description Product-Specific Rule 7201 Pig iron and spiegeleisen in pigs, blocks or other primary forms: 7201 7201.10 - Non-alloy pig iron containing by weight 0.5 or less of phosphorus RVC40 or CC 7201 7201.20 - Non-alloy pig iron containing by weight more than 0.5 of phosphorus RVC40 or CC 7201 7201.50 - Alloy pig iron; spiegeleisen RVC40 or CC 7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 , in lumps, pellets or similar forms: 7203 7203.10 - Ferrous products obtained by direct reduction of iron ore RVC40 or CC 7203 7203.90 - Other RVC40 or CC 7204 Ferrous waste and scrap; remelting scrap ingots of iron or steel: 7204 7204.10 - Waste and scrap of cast iron Origin shall be conferred to a good of this subheading that is derived from production or consumption in a Party 7204 7204.21 - Waste and scrap of alloy steel: of stainless steel Origin shall be conferred to a good of this subheading that is derived from production or consumption in a Party 7204 7204.29 - Waste and scrap of alloy steel: other Origin shall be conferred to a good of this subheading that is derived from production or consumption in a Party 7204 7204.30 - Waste and scrap of tinned iron or steel Origin shall be conferred to a good of this subheading that is derived from production or consumption in a Party 7204 7204.41 - Other waste and scrap: turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles Origin shall be conferred to a good of this subheading that is derived from production or consumption in a Party 7204 7204.49 - Other waste and scrap: other Origin shall be conferred to a good of this subheading that is derived from production or consumption in a Party AANZFTA – Annex 2 171 Column 1 Column 2 Column 3 Column 4 Tariff Heading Tariff Sub- Heading Product Description Product-Specific Rule 7204 7204.50 - Remelting scrap ingots Origin shall be conferred to a good of this subheading that is derived from production or consumption in a Party 7207 Semi-finished products of iron or non-alloy steel: 7207 7207.11 - Containing by weight less than 0.25 of carbon: of rectangular including square cross-section, the width measuring less than twice the thickness RVC40 or CC 7207 7207.12 - Containing by weight less than 0.25 of carbon: other, of rectangular other than square cross-section RVC40 or CC 7207 7207.19 - Containing by weight less than 0.25 of carbon: other RVC40 or CC 7207 7207.20 - Containing by weight 0.25 or more of carbon RVC40 or CC 7208 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: 7208 7208.10 - In coils, not further worked than hot-rolled, with patterns in relief RVC40 or CC 7208 7208.25 - Other, in coils, not further worked than hot-rolled, pickled: of a thickness of 4.75 mm or more RVC40 or CC 7208 7208.26 - Other, in coils, not further worked than hot-rolled, pickled: of a thickness of 3 mm or more but less than 4.75 mm RVC40 or CC 7208 7208.27 - Other, in coils, not further worked than hot-rolled, pickled: of a thickness of less than 3 mm RVC40 or CC 7208 7208.36 - Other, in coils, not further worked than hot-rolled: of a thickness exceeding 10 mm RVC40 or CC 7208 7208.37 - Other, in coils, not further worked than hot-rolled: not further worked than hot-rolled: of a thickness of 4.75 mm or more but not exceeding 10 mm RVC40 or CC 7208 7208.38 - Other, in coils, not further worked than hot-rolled: of a thickness of 3 mm or more but less than 4.75 mm RVC40 or CC 7208 7208.39 - Other, in coils, not further worked than hot-rolled: of a thickness of less than 3 mm RVC40 or CC 7208 7208.40 - Not in coils, not further worked than hot-rolled, with patterns in relief RVC40 or CC 7208 7208.51 - Other, not in coils, not further worked than hot-rolled: of a thickness exceeding 10 mm RVC40 or CC 7208 7208.52 - Other, not in coils, not further worked than hot-rolled: of a thickness of 4.75 mm or more but not exceeding 10 mm RVC40 or CC 7208 7208.53 - Other, not in coils, not further worked than hot-rolled: of a thickness of 3 mm or more but less than 4.75 mm RVC40 or CC 7208 7208.54 - Other, not in coils, not further worked than hot-rolled: of a thickness of less than 3 mm RVC40 or CC AANZFTA – Annex 2 172 Column 1 Column 2 Column 3 Column 4 Tariff Heading Tariff Sub- Heading Product Description Product-Specific Rule 7208 7208.90 - Other RVC40 or CC 7209 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled cold-reduced, not clad, plated or coated: 7209 7209.15 - In coils, not further worked than cold-rolled cold-reduced: of a thickness of 3 mm or more RVC40 or CTH, except from 7208 or 7211 7209 7209.16 - In coils, not further worked than cold-rolled cold-reduced: of a thickness exceeding 1 mm but less than 3 mm RVC40 or CTH, except from 7208 or 7211 7209 7209.17 - In coils, not further worked than cold-rolled cold-reduced: of a thickness of 0.5 mm or more but not exceeding 1 mm RVC40 or CTH, except from 7208 or 7211 7209 7209.18 - In coils, not further worked than cold-rolled cold-reduced: of a thickness of less than 0.5 mm RVC40 or CTH, except from 7208 or 7211 7209 7209.25 - Not in coils, not further worked than cold-rolled cold-reduced: of a thickness of 3 mm or more RVC40 or CTH, except from 7208 or 7211 7209 7209.26 - Not in coils, not further worked than cold-rolled cold-reduced: of a thickness exceeding 1 mm but less than 3 mm RVC40 or CTH, except from 7208 or 7211 7209 7209.27 - Not in coils, not further worked than cold-rolled cold-reduced: of a thickness of 0.5 mm or more but not exceeding 1 mm RVC40 or CTH, except from 7208 or 7211 7209 7209.28 - Not in coils, not further worked than cold-rolled cold-reduced: of a thickness of less than 0.5 mm RVC40 or CTH, except from 7208 or 7211 7209 7209.90 - Other RVC40 or CTH, except from 7208 or 7211 7210 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated: 7210 7210.11 - Plated or coated with tin: of a thickness of 0.5 mm or more RVC40 or CTH, except from 7208, 7209 or 7211 7210 7210.12 - Plated or coated with tin: of a thickness of less than 0.5 mm RVC40 or CTH, except from 7208, 7209 or 7211 7210 7210.20 - Plated or coated with lead, including terne-plate RVC40 or CTH, except from 7208, 7209 or 7211 7210 7210.30 - Electrolytically plated or coated with zinc RVC40 or CTH, except from 7208, 7209 or 7211 7210 7210.41 - Otherwise plated or coated with zinc: corrugated RVC40 or CTH, except from 7208, 7209 or 7211 7210 7210.49 - Otherwise plated or coated with zinc: other RVC40 or CTH, except from 7208, 7209 or 7211 AANZFTA – Annex 2 173 Column 1 Column 2 Column 3 Column 4 Tariff Heading Tariff Sub- Heading Product Description Product-Specific Rule 7210 7210.50 - Plated or coated with chromium oxides or with chromium and chromium oxides RVC40 or CTH, except from 7208, 7209 or 7211 7210 7210.61 -Plated or coated with aluminium: plated or coated with aluminium-zinc alloys RVC40 or CTH, except from 7208, 7209 or 7211 7210 7210.69 -Plated or coated with aluminium: other RVC40 or CTH, except from 7208, 7209 or 7211 7210 7210.70 -Painted, varnished or coated with plastics RVC40 or CTH, except from 7208, 7209 or 7211 7210 7210.90 -Other RVC40 or CTH, except from 7208, 7209 or 7211 7211 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated: 7211 7211.13 - Not further worked than hot-rolled: rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief RVC40 or CC 7211 7211.14 - Not further worked than hot-rolled: other, of a thickness of 4.75 mm or more RVC40 or CC 7211 7211.19 - Not further worked than hot-rolled: other RVC40 or CC 7211 7211.23 - Not further worked than cold-rolled cold-reduced: containing by weight less than 0.25 of carbon RVC40 or CC 7211 7211.29 - Not further worked than cold-rolled cold-reduced: other RVC40 or CC 7211 7211.90 - Other RVC40 or CC 7212 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated: 7212 7212.10 - Plated or coated with tin RVC40 or CTH, except from 7208 through 7211 7212 7212.20 - Electrolytically plated or coated with zinc RVC40 or CTH, except from 7208 through 7211 7212 7212.30 - Otherwise plated or coated with zinc RVC40 or CTH, except from 7208 through 7211 AANZFTA – Annex 2 174 Column 1 Column 2 Column 3 Column 4 Tariff Heading Tariff Sub- Heading Product Description Product-Specific Rule 7212 7212.40 - Painted, varnished or coated with plastics RVC40 or CTH, except from 7208 through 7211 7212 7212.50 - Otherwise plated or coated RVC40 or CTH, except from 7208 through 7211 7212 7212.60 - Clad RVC40 or CTH, except from 7208 through 7211 7213 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel: 7213 7213.10 - Containing indentations, ribs, grooves or other deformations produced during the rolling process RVC40 or CC 7213 7213.20 - Other, of free-cutting steel RVC40 or CC 7213 7213.91 - Other: of circular cross-section measuring less than 14 mm in diameter RVC40 or CC 7213 7213.99 - Other: other RVC40 or CC 7214 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling: 7214 7214.10 - Forged RVC40 or CC 7214 7214.20 - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling RVC40 or CC 7214 7214.30 - Other, of free-cutting steel RVC40 or CC 7214 7214.91 - Other: of rectangular other than square cross-section RVC40 or CC 7214 7214.99 - Other: other RVC40 or CC 7215 Other bars and rods of iron or non-alloy steel: 7215 7215.10 - Of free-cutting steel, not further worked than cold-formed or cold-finished RVC40 or CC 7215 7215.50 - Other, not further worked than cold-formed or cold-finished RVC40 or CC 7215 7215.90 - Other RVC40 or CC 7216 Angles, shapes and sections of iron or non-alloy steel: 7216 7216.10 - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm RVC40 or CC AANZFTA – Annex 2 175 Column 1 Column 2 Column 3 Column 4 Tariff Heading Tariff Sub- Heading Product Description Product-Specific Rule 7216 7216.21 - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: L sections RVC40 or CC 7216 7216.22 - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: T sections RVC40 or CC 7216 7216.31 - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more: U sections RVC40 or CC 7216 7216.32 - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more: I sections RVC40 or CC 7216 7216.33 - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more: H sections RVC40 or CC 7216 7216.40 - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more RVC40 or CC 7216 7216.50 - Other angles, shapes and sections, not further worked that hot-rolled, hot-drawn or extruded RVC40 or CC 7216 7216.61 - Angles, shapes and sections, not further worked than cold-formed or cold-finished: obtained from flat-rolled products RVC40 or CC 7216 7216.69 - Angles, shapes and sections, not further worked than cold-formed or cold-finished: other RVC40 or CC 7216 7216.91 - Other: cold-formed or cold-finished from flat-rolled products RVC40 or CC 7216 7216.99 - Other: other RVC40 or CC 7217 Wire of iron or non-alloy steel: 7217 7217.10 - Not plated or coated, whether or not polished RVC40 or CTH, except from 7213 through 7215 7217 7217.20 - Plated or coated with zinc RVC40 or CTH, except from 7213 through 7215 7217 7217.30 - Plated or coated with other base metals RVC40 or CTH, except from 7213 through 7215 7217 7217.90 - Other RVC40 or CTH, except from 7213 through 7215 7219 Flat-rolled products of stainless steel, of a width of 600 mm or more: 7219 7219.31 - Not further worked than cold-rolled cold-reduced: of a thickness of 4.75 mm or more RVC40 or CTSH 7219 7219.32 - Not further worked than cold-rolled cold-reduced: of a thickness of 3 mm or more but less than 4.75 mm RVC40 or CTSH 7219 7219.33 - Not further worked than cold-rolled cold-reduced: of a thickness exceeding 1 mm but less than 3 mm RVC40 or CTSH AANZFTA – Annex 2 176 Column 1 Column 2 Column 3 Column 4 Tariff Heading Tariff Sub- Heading Product Description Product-Specific Rule 7219 7219.34 - Not further worked than cold-rolled cold-reduced: of a thickness of 0.5 mm or more but not exceeding 1 mm RVC40 or CTSH 7219 7219.35 - Not further worked than cold-rolled cold-reduced: of a thickness of less than 0.5 mm RVC40 or CTSH 7219 7219.90 - Other RVC40 or CTSH 7220 Flat-rolled products of stainless steel, of a width of less than 600 mm: 7220 7220.11 - Not further worked than hot-rolled: of a thickness of 4.75 mm or more RVC40 or CTH, except from 7219 7220 7220.12 - Not further worked than hot-rolled: of a thickness of less than 4.75 mm RVC40 or CTH, except from 7219 7220 7220.20 - Not further worked than cold-rolled cold-reduced RVC40 or CTH, except from 7219 7220 7220.90 - Other RVC40 or CTH, except from 7219 7226 Flat-rolled products of other alloy steel, of a width of less than 600 mm: 7226 7226.11 - Of silicon-electrical steel: grain-oriented RVC40 or CTH, except from 7225 7226 7226.19 - Of silicon-electrical steel: other RVC40 or CTH, except from 7225 7226 7226.20 - Of high speed steel RVC40 or CTH, except from 7225 7226 7226.91 - Other: not further worked than hot-rolled RVC40 or CTH, except from 7225 7226 7226.92 - Other: not further worked than cold-rolled cold-reduced RVC40 or CTH, except from 7225 7226 7226.99 - Other RVC40 or CTH, except from 7225 7227 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel: 7227 7227.10 - Of high speed steel RVC40 or CTH, except from 7228 7227 7227.20 - Of silico-manganese steel RVC40 or CTH, except from 7228 7227 7227.90 - Other RVC40 or CTH, except from 7228 7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel: 7228 7228.10 - Bars and rods, of high speed steel RVC40 or CTH, except from 7227 7228 7228.20 - Bars and rods, of silico-manganese steel RVC40 or CTH, except from 7227 AANZFTA – Annex 2 177 Column 1 Column 2 Column 3 Column 4 Tariff Heading Tariff Sub- Heading Product Description Product-Specific Rule 7228 7228.30 - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded RVC40 or CTH, except from 7227 7228 7228.40 - Other bars and rods, not further worked than forged RVC40 or CTH, except from 7227 7228 7228.50 - Other bars and rods, not further worked than cold-formed or cold-finished RVC40 or CTH, except from 7227 7228 7228.60 - Other bars and rods RVC40 or CTH, except from 7227 7228 7228.70 - Angles, shapes and sections RVC40 or CTH, except from 7227 7228 7228.80 - Hollow drill bars and rods RVC40 or CTH, except from 7227 7229 Wire of other alloy steel: 7229 7229.20 - Of silico-manganese steel RVC40 or CTH, except from 7227 or 7228 7229 7229.90 - Other RVC40 or CTH, except from 7227 or 7228

CHAPTER 73 ARTICLES OF IRON OR STEEL