SPESIFIKASI TEKNIS PERALATAN LABORATORIUM PENGADAAN PENGEMBANGAN INDUSTRI TEKNOLOGI KEPOLISIAN
A. Laboratorium Alat dan Material Khusus Almatsus
1. UTILITY EQUIPMENT
Utility Equipment Consist of : a.
Air Compressor to supply compressed air for serving bench test unit and cleaning purpose. Air Compressor must have : Working Pressure 9 Kgfcm2, Displacement 500 Lmin, Air tank
capacity minimum 155 L, Electric motor drived,3 Phase ,380 Volt ,3,7 kW, Working with adjustable range automatic pressure switch. Air Compressor Must Have Eight Years Spare
Parts Warranty and Distributor In Indonesia’s Juridiction.
b. Air Tank as a Compressed air reservoir with specification : Working Pressure 12 kgfcm2,
Capacity 1000 litres, Completed with pressure gauge 4”,range 0-15kgfcm2, SUS 304, 2 pieces of 1” outlet port with shut off valve, Equipped with pressure relief valve, Air tank should
be Sand Blasted SA 2.5 as surface treatment before painting, Painting must at least 30 mu zinc rich primary coat and 50 mu epoxy top coat, Supplied with identity tag and also a
certificate of test and operation from Depnaker.
c. FRL Set Flow 2600 lmin, Maximum Pressure 12 kgfcm2.
d. Compressed Air Pipeline with specification : Air Pipeline must be made from medium steel
galvanized pipe size ½”. The galvanized pipe is hanged on ceiling with appropriate hanger. Pipe line should be leak proof and has passed the hydrostatic test. The pipe is colored blue by
enamel coat. Pipeline has 12 outlet port. Each of them is equipped with ½” brass ballvalve. Each outlet is connected to flexible air tube d: 10 mm, 5 m. Quick release connector is put in
the end of the tube to connect pipe line with instruments.
e. Air Duster metal air duster to clean equipment by blowing compressed air.
f. Outlet valve
g. Flexible tubing
h. Extension Cable to supply electric power for equipment placed at distant to electric terminal.
Extension cable is in form of roll cable with 4 outlet and indicator lamp and the cable contains 3 wire to run ac 1 phase and grounding. Cable stands for 50 meters. Have min. capacity 16 A
non-inductive load.
i. Exhaust Fan for taking up polluted air or fumes which is produced throughout machining or
test process. Exhaust Fan is wall mount type, have siphon capacity min. 8700 cmh, Noise max 75 dB, Electricity power 600 watt, Fan and case is made from metal coated with a
rustproof paint. Exhaust Fan is equipped with onoff switch which is placed in heavy duty switch box.
j. Vacuum Cleaner which have Siphon capacity min 16 kPa, Power 1 ph,220V,1200 watt,
Flexible hose, Cable capstan, and Wheel to maneuver. k.
Fire extinguisher powder type, 5 Kgs, include wall type holder and fire signage.
2. LABORATORY EQUIPMENT STANDARD
Kategori