7
SPEKTEK ALAT LABORATORIUM PENGEMBANGAN INDUSTRI TEKNOLOGI KEPOLISIAN KSA T.A. 2011.
b. Knife and spike test
To test body shield against knife and other sharp ended materials to determine the strength and reliability. The test equipment’s are:
1 The test equipment should equipped with:
a Knife velocity meter
b Test knife and test nail
c Launcher
d Launcher guide
e Body shield mounting
2 Knife velocity meter must be able to measure velocity range from 3 to 8 ms with 0,02
ms accuracy 3
Knife and nail must be made from steel and conform to drawing that has been included with weight of each piece is 0.65kg with 6.5gr accuracy
4 Launcher must be made of polymer in cylinder form with low friction coefficient.
Completed with nail or knife holder. Launcher weight should be 1.25kg with 13gr accuracy
5 Launcher guide is for guiding the path of free falling launcher. Launcher guide must be
able to launch the knife or nail with measurable energy between 30 to 50 Joule. Launching plane of the guide must be made so the friction between guide and the
launcher is negligible.
6 Body shield mounting must be able to rotate in any degrees to enable knife and spike
test from any directions and angles. 7
All parts which made of steel should made from stainless steel or hot dipped galvanize in case of the possibilty of paint removal is high
8 Completed with operation procedure.
8. DESIGN CENTER AND MACHINING FACILITY
Design Center and Machining Facility consist of :
a. Software Design
. Software for designing and computing prototype. The Software should be able to built 3D Model of part and assembly, Converting model to 2D, Make animation from
parts and assemblies, Capable to run simulations and make validations.
b. Software CAM
. Software for converting model from design to CNC machine commands. Able to convert 3D or 2 D model to G Code CNC 3+2 Axis.
c. Personal Computer.
Have Min Processor i7. VGA Card Minimum nVidia Quadro 1000. Harddisk 500 GB. RAM 8 GB. System Operating Windows 7. Display Monitor 21”. Able to print
A3 paper size.
d. CNC Milling
. Table 700 x 450 mm, Travel xyz 610 450 400, Travel speed xyz 32 32 24 mmin, Spindle speed 8000 rpm, Spindlemotor 5,5 kw, Positioning accuracy 0,005300 mm,
Repatability 0,003 mm, Additional 1 a rotational axis table.
e. Lathe Machine.
Working bench axis distance is 1000mm, Minimum swing distance is 320 mm, Capable to make thread with pitch 0,5-7mm, Equipped with Electric Motor 1 kw,1450
rpm, 380, Equipped with 3 and 4 claw, Equipped with set shank holder and carbide bit, and live centre.
f. Manual Milling Machine.
1 Drilling Capacity : 38mm
2 Table Dimmension : 730 x 210 mm
3 Speed Range : 95-1600 rpm
8
SPEKTEK ALAT LABORATORIUM PENGEMBANGAN INDUSTRI TEKNOLOGI KEPOLISIAN KSA T.A. 2011.
4 Equipped with motor 750 watt, drill bits of HSS class from 3 to 13 mm, end mill bits 4-12
mm, standard vise machining 10”, Angle 10”, and roundtable.
g. Bench Vise.
8 inch size, Steel Bench Vise.
h. Shaving Set.
Consist of round shape, flat shape and triangular shape with varies of roughness surface.
i. TIG MMA Inverter Welding Machine.
Input 380 V , 8,3 KVA rated. Ouput 20-300A, 19 V Rated, Over Voltage and over current safety equipment, Duty cycle min 60, Display Current
meter Digital, Equipped with torch, Argon gas cylinder, pressure regulator, SMAW handle.
j. Hand Grinding.
