CertificationQualification of NDT Personnel

Page 122 Part 2 ✈ Chapter 3 - Checklists MRA – 1st Edition September 1998 Part 2 ✈ Chapter 2 - Airworthiness Audit Policy and Procedures Items References Result A-2 Are the records of NDT personnel available and up to date? Do the records contain information regarding their: - physical examination; - training; - work experience; and - level of certificationqualification? QPM OK FDG NA A-3 Is the proficiency of certifiedqualified personnel verified? QPM OK FDG NA Items Certified – Completed by:

3.8.19 Eddy Current Inspection

Items References Result A-1 According to what standard are eddy current inspections conducted? QPM OK FDG NA A-2 Is the eddy current equipment calibrated for each inspection of specified test pieces? QPM OK FDG NA A-3 Are approved techniques andor technical instructions followed? QPM OK FDG NA A-4 Are test pieces and eddy current probes properly identified with respect to techniques or inspection guidelines? QPM OK FDG NA A-5 Are partscomponents properly cleaned prior to the eddy current testing? QPM OK FDG NA A-6 What type of equipment is used and for what purpose? OBS OK FDG NA Part 2 ✈ Chapter 3 - Checklists Page 123 Part 2 - Airworthiness Audit Policy and Procedures MRA – 1 st Edition September 1998 Items References Result A-7 Is the eddy current equipment used for product acceptance calibrated to the reference standard or equipment manufacturers specification by an approved calibration laboratory? QPM OK FDG NA Items Certified – Completed by:

3.8.20 Liquid Penetrant Inspection

Items References Result A-1 According to what standard are liquid penetrant inspections carried out: - MIL-1-6866; - 48-GP-12M; or - other? QPM OK FDG NA A-2 Does the pre-cleaning process adequately prepare the surface for the application of the penetrant? OBS OK FDG NA A-3 Are the drying ovens thermostatically controlled at the specified temperature? QPM OK FDG NA A-4 Are penetrant agents applied at the recommended temperature? QPM OK FDG NA A-5 Are precautions taken to prevent the overdrying and overheating of parts? OBS OK FDG NA A-6 Do inspectors observe darkroom conditioning time before conducting the inspection? QPM OK FDG NA A-7 Is the inspection conducted at the proper stage in the manufacturing process? QPM OK FDG NA