Facilities CAR 423.08 3a Common Requirements
3.7.2 Basic Training Requirements
3.7.2.1 Prerequisites and Curriculum
CAR 423.083diABandCiii References Result A-1 Does the basic training organisation have procedures for student admission? TCM OK FDG NA A-2 Do these procedures ensure that the student has the required background knowledge to assimilate the course content? TCM OK FDG NA A-3 Does the course content cover the subjects and items prescribed in the applicable curriculum guide? TCM OK FDG NA A-4 Is the curriculum for each accredited training program included in the TCM? TCM OK FDG NA A-5 Does the curriculum show the allotted hours for each subject areas and whether it is theoretical area and indicate whether the time is devoted to theoretical or practical work? TCM OK FDG NA Items Certified - Completed by:3.7.2.2 Equipment General Aircraft and Avionics
CAR 423.083dic References Result A-1 Does the basic training organisation have at least one aircraft appropriate to the course curriculum? Avionics courses must include a comprehensive avionics package. TCM OK FDG NA Page 90 Part 2 ✈ Chapter 3 - Checklists MRA – 1st Edition September 1998 Part 2 ✈ Chapter 2 - Airworthiness Audit Policy and Procedures CAR 423.083dic References Result A-2 Is this aircraft of a type approved for civil operation and complete in all respects? TCM OK FDG NA A-3 Can this aircraft be used in all aspects of training, including ground runs? TCM OK FDG NA A-4 Does the training organisation have a variety of training aids suitable for the completion of practical projects as part of the curriculum? TCM OK FDG NA A-5 Are the training aids sufficiently diverse to show the various methods of aircraft construction, assembly inspection and operation? TCM OK FDG NA A-6 Are there enough training aid units so that no more than four students will have to work on any one unit at a time? TCM OK FDG NA A-7 Does the basic training organisation have training aids for the more complicated aircraft systems, if its primary aircraft covers only simple systems? TCM OK FDG NA A-8 Does the organisation use an aircraft with a valid C of A for training purposes? TCM OK FDG NA A-9 Does the organisation have policies and procedures in place to ensure the airworthiness condition of the aircraft prior to flight? TCM OK FDG NA A-10 Are these policies and procedures adequate? Are they complied with prior to flight? TCM OK FDG NAParts
» Initial Certification Audit Audit Types
» Resource Allocation Criteria Frequency
» Financial Change Labour Difficulties
» Management Practices Risk Indicators
» Poor Internal Audit or Quality Assurance Program
» Change in Operational Scope or Additional Authorities
» Changes in Contracting for Services
» Additions or Changes to Product Line
» Purpose Co-ordination Unity of Control
» Qualifications Principal Inspector Restrictions
» Inconsistencies — Civil Aviation Approvals Parallel Report
» Airworthiness Operations Specialist Audit
» Responsibilities Convening Authority CA
» Terms of Reference Qualifications
» Terms of Reference Qualifications Responsibilities
» Team Selection Observer Pre-Audit
» General Entry Meeting Physical Audit
» Pre-Audit Checklists Interviews Evaluation
» Confirmation Request Form CRF
» Completion of Audit Finding Form
» Daily Briefings Exit Meeting
» General Audit Report Post-Audit
» Parallel Report Follow-Up Post-Audit
» Corrective Action Plan Audit Follow-Up
» Audit Philosophy Applied Standard
» Purpose Policy and Organisation
» Applicability Policy and Organisation
» Approved Maintenance Organizations AMOs
» Foreign Approved Maintenance Organizations FAMOs
» Airworthiness Engineering Organizations AEOs
» Conduct of the Audit Team Use of Checklists
» Maintenance Policy Manual or Maintenance Control Manual
» Technical PublicationsLibrary Approved Maintenance Organizations
» Personnel Approved Maintenance Organizations
» Maintenance Training Approved Maintenance Organizations
» Technical Records Approved Maintenance Organizations
» FuellingDefuelling Approved Maintenance Organizations
» De-Icing ProceduresEquipment Approved Maintenance Organizations
» Service Difficulty Reporting Approved Maintenance Organizations
» Defect Control Deferral Approved Maintenance Organizations
» Sample Aircraft for Conformance
» Sub-base Approved Maintenance Organizations
» Company Quality Audits Approved Maintenance Organizations
» Receiving Inspections Approved Maintenance Organizations
» Maintenance Schedule Approved Maintenance Organizations
» ReliabilityMaintenance Development Programs Approved Maintenance Organizations
» SupportOverhaul Shops Approved Maintenance Organizations
» Control of PartsMaterial Approved Maintenance Organizations
» TestingMeasuring Equipment Maintenance Contracts
» Airworthiness DirectivesService Bulletin Compliance
» Corrosion ControlAging Aircraft Approved Maintenance Organizations
» Non-Destructive Testing Weight and Balance Control
» BorrowingPooling of Parts Certification of Components
» Storage Facilities Approved Maintenance Organizations
» Category IIIII Maintenance Program
» Extended Range Operations EROPs
» Maintenance Program Maintenance Test and Ferry Flights
» Enroute Inspection Air Operator
» Quality Control Curriculum Common Requirements
» Examination Graduation Certificates Common Requirements
» Instructors Organizational Chart Common Requirements
» Facilities CAR 423.08 3a Common Requirements
» Prerequisites and Curriculum Equipment General Aircraft and Avionics
» Facilities General Aircraft and Avionics
» Reference Material Class Size
» Advisory Committee Basic Training Requirements
» Prerequisites and Curriculum Type Training Requirements
» Equipment Type Training Requirements
» Facilities Type Training Requirements
» Mixing of Adhesives Job Cards
» Cleaning Handling Bonding Process
» Loading of Parts into Fixtures
» Certification and Control of Hot Presses, Autoclaves and Jigs References Curing References
» Inspection of Bonded Parts References
» Cadmium Plating Chemical Milling of Aluminum Alloys
» Chemical Conversion Coatings for Aluminum Alodine: Brush
» ChromicSulphuric Acid Anodizing of Aluminum Copper Plating
» Dichromate Treatment of Magnesium Alloys
» Heat Treatment of Aluminum Alloys Air Furnace Heat Treatment of Aluminum Alloys Salt Bath
» Heat Treatment of Steel Sulphuric AcidSodium Dichromate Etch
» Vapour Degreasing Specification Materials
» Aluminum Brazing Dip Brazing
» Fusion Welding Manufacturing Processes
» Metallic Arc Welding Tungsten Inert Gas TIG Shielded-Arc Welding
» CertificationQualification of NDT Personnel
» Eddy Current Inspection Manufacturing Processes
» Liquid Penetrant Inspection Manufacturing Processes
» Magnetic Particle Inspection Manufacturing Processes
» Radiographic Inspection Manufacturing Processes
» Ultrasonic Inspection Manufacturing Processes
» Non-Conforming Material Review Board MRB
» Special Processes Sub-Contractor and Supplier Control
» Production Control System Manual PCSM
» Control of PartsMaterial Distributors
» Recertification of Components Distributors
» Storage Facilities Facilities Distributors
» Engineering Procedures ManualDesign Approval Procedures EPMDAPM
» Technical PublicationsLibrary Airworthiness Engineering Organization
» Personnel Records Airworthiness Engineering Organization
» Quality Audits Airworthiness Engineering Organization
» Data Review Airworthiness Engineering Organization
» Airworthiness Inspection Representative AIR
» Maintenance Policy Manual MPM
» Engineering - Design, Development and Review
» Personnel Avionics Approved Maintenance Organizations and
» Technical Data Control Avionics Approved Maintenance Organizations and
» Control of PartsMaterial Receiving Inspections
» Sub-Contracting and Supplier Control Testing
» Sample Units for Conformance Sample Aircraft for Conformance if applicable
» StorageQuarantine Avionics Approved Maintenance Organizations and
» Inspection Records Avionics Approved Maintenance Organizations and
» Workshop - General Battery Shop LeadAcid CAA EEL1-1
» Battery Shop Nicad CAA EEL1-3 Shipping
» Technical PublicationLibrary Avionics Approved Maintenance Organizations and
» Software Quality Assurance SQA if applicable Electrostatic Sensitive Device ESD
» Testing and Measuring EquipmentSpecial Tools
» Mandatory Reporting of Defects
» Technical Training Standards Avionics Approved Maintenance Organizations and
» OP-10 Flight Documentation Applicability
» OP-11 Aircraft Inspection OP-12 Aircraft Documentation
» OP-13 Minimum Equipment List OP-14 Cabin Safety
» OP-15 Flight Attendant Training Program
» OP-16 Flight Attendant Training Records
Show more