Mixing of Adhesives Job Cards

Page 104 Part 2 ✈ Chapter 3 - Checklists MRA – 1st Edition September 1998 Part 2 ✈ Chapter 2 - Airworthiness Audit Policy and Procedures References Result A-2 Is the mixing contained in accordance with the process specifications? QPM OK FDG NA Items Certified – Completed by:

3.8.2.4 Job Cards

References Result A-1 Do the job cards specify bonding details for parts and assemblies? QPM OK FDG NA A-2 Do the job cards record part, batch and serial numbers, test specimens, and operations and inspection acceptance? QPM OK FDG NA A-3 Do the job cards detail the cleaning operations and materials to be used? QPM OK FDG NA OK FDG NA Items Certified – Completed by:

3.8.2.5 Cleaning

References Result A-1 Are parts vapour-degreased or hand-cleaned? QPM OK FDG NA A-2 Are parts cleaned using alkaline cleaning methods? QPM OK FDG NA A-3 Are parts etched in a solution of sodium dichromate and sulphuric acid and rinsed in demineralized water? QPM OK FDG NA Part 2 ✈ Chapter 3 - Checklists Page 105 Part 2 - Airworthiness Audit Policy and Procedures MRA – 1 st Edition September 1998 References Result A-4 Is care taken to prevent acid entrapment in corners or hidden areas during cleaning? QPM OK FDG NA A-5 Do all cleaning operations comply with the process specifications? QPM OK FDG NA Items Certified – Completed by:

3.8.2.6 Handling

References Result A-1 Are clean, dry, lint-free, white cotton gloves always worn by personnel when handling clean parts? QPM OK FDG NA A-2 Is the elapsed time between cleaning, the application of adhesive primer, and curing controlled in accordance with the process specifications? QPM OK FDG NA A-3 Are parts stored in a clean, controlled atmosphere? QPM OK FDG NA A-4 Are parts wrapped in clean craft paper? QPM OK FDG NA A-5 Are the temperature and humidity controlled in storage areas? QPM OK FDG NA A-6 Is the handling of clean parts controlled in accordance with the requirements of the process specification requirements? QPM OK FDG NA Items Certified – Completed by: