Prerequisites and Curriculum Type Training Requirements

Part 2 ✈ Chapter 3 - Checklists Page 97 Part 2 - Airworthiness Audit Policy and Procedures MRA – 1 st Edition September 1998 CAR 23.083diiiAB References Result A-5 Is the course approval annotated to reflect the separate enginepropeller course requirement? TCM OK FDG NA A-6 Do graduates either complete a separate enginepropeller course or hold a rating on another aircraft having a similar enginepropeller? TCM OK FDG NA A-7 Are course lengths based on the complexity of the type, i.e. aircraft type between 70 and 240 or engine type between 35 and 70? TCM OK FDG NA A-8 Does the type course meet the following allotment of hours based on complexity, i.e.: - Dehavilland DH8: 90-120; - Gulfstream G11: 120-160; - Boeing 727: 160-200; - Airbus 320: 200-240; - Bell BH206: 70-90; or - Bell BH212: 90-120? TCM OK FDG NA Items Certified - Completed by:

3.7.3.2 Equipment

CAR 423.083diiiC References Result A-1 Does the type training organisation have a system for ensuring a minimum of 5 per cent hands-on training? TCM OK FDG NA A-2 Does the organisation offer any combination of the following equipment: - simulator or procedures trainer; - aircraft; or - training aid mock-ups? TCM OK FDG NA Page 98 Part 2 ✈ Chapter 3 - Checklists MRA – 1st Edition September 1998 Part 2 ✈ Chapter 2 - Airworthiness Audit Policy and Procedures CAR 423.083diiiC References Result A-3 Does this equipment ensure that: - students can locate and identify aircraft components; and - students are able to troubleshoot, inspect and carry out functional tests of all live aircraft systems from a cockpit perspective? TCM OK FDG NA Items Certified – Completed by:

3.7.3.3 Facilities

CAR 423.083diiiD References Result A-1 Does the type training organisation have facilities appropriate to the course content? TCM OK FDG NA A-2 Are simulators located in a separate area and equipped for maintenance training? TCM OK FDG NA A-3 Do hangar facilities provide sufficient space for an aircraft? TCM OK FDG NA A-4 Are hangar shops equipped for: - the disassembly, inspection, maintenance, overhaul, adjustment and assembly of aircraft; or - the location, inspection, troubleshooting and performance of functional tests on various areas of an aircraft? TCM OK FDG NA A-5 Are training aids and mock-ups located in a sufficiently large space for display, inspection and operation? TCM OK FDG NA